Security Bulletin: Multiple vulnerabilities in IBM Rapid Infrastructure Automation

Vulnerability Details

CVEID:   CVE-2024-12254
DESCRIPTION:   Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2024-4032
DESCRIPTION:   An unspecified error with ipaddress considers some not globally reachable addresses global and vice versa in Python CPython has an unknown impact and attack vector.
CWE:   CWE-697: Incorrect Comparison
CVSS Source:   IBM X-Force
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)

CVEID:   CVE-2024-8088
DESCRIPTION:   Python CPython is vulnerable to a denial of service, caused by an infinite loop flaw when iterating over names of entries in a zip archive. By using a specially crafted zip archive, a remote attacker could exploit this vulnerability to cause a denial of service condition.
CWE:   CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
CVSS Source:   CVE.org
CVSS Base score:   8.7
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/S:N/AU:N/R:U/RE:L)

CVEID:   CVE-2024-9287
DESCRIPTION:   A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected.
CWE:   CWE-428: Unquoted Search Path or Element
CVSS Source:   NVD
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-6827
DESCRIPTION:   Gunicorn version 21.2.0 does not properly validate the value of the 'Transfer-Encoding' header as specified in the RFC standards, which leads to the default fallback method of 'Content-Length,' making it vulnerable to TE.CL request smuggling. This vulnerability can lead to cache poisoning, data exposure, session manipulation, SSRF, XSS, DoS, data integrity compromise, security bypass, information leakage, and business logic abuse.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   security@huntr.dev
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)

CVEID:   CVE-2025-27363
DESCRIPTION:   An out of bounds write exists in FreeType versions 2.13.0 and below (newer versions of FreeType are not vulnerable) when attempting to parse font subglyph structures related to TrueType GX and variable font files. The vulnerable code assigns a signed short value to an unsigned long and then adds a static value causing it to wrap around and allocate too small of a heap buffer. The code then writes up to 6 signed long integers out of bounds relative to this buffer. This may result in arbitrary code execution. This vulnerability may have been exploited in the wild.
CWE:   CWE-787: Out-of-bounds Write
CVSS Source:   NVD
CVSS Base score:   8.1
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27113
DESCRIPTION:   libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a NULL pointer dereference in xmlPatMatch in pattern.c.
CWE:   CWE-476: NULL Pointer Dereference
CVSS Source:   NVD
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2024-12905
DESCRIPTION:   An Improper Link Resolution Before File Access ("Link Following") and Improper Limitation of a Pathname to a Restricted Directory ("Path Traversal"). This vulnerability occurs when extracting a maliciously crafted tar file, which can result in unauthorized file writes or overwrites outside the intended extraction directory. The issue is associated with index.js in the tar-fs package. This issue affects tar-fs: from 0.0.0 before 1.16.4, from 2.0.0 before 2.1.2, from 3.0.0 before 3.0.8.
CWE:   CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
CVSS Source:   Seal Security
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2024-40897
DESCRIPTION:   GStreamer ORC is vulnerable to a stack-based buffer overflow, caused by improper bounds checking by the compiler. By persuading a victim to open a specially crafted file, a remote attacker could overflow a buffer and execute arbitrary code on the build environment.
CWE:   CWE-787: Out-of-bounds Write
CVSS Source:   IBM X-Force
CVSS Base score:   7
CVSS Vector:   (CVSS:3.0/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27830
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs during serialization of DollarBlend in a font, for base/write_t1.c and psi/zfapi.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27833
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs for a long TTF font name to pdf/pdf_fmap.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27834
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs via an oversized Type 4 function in a PDF document to pdf/pdf_func.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27835
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs when converting glyphs to Unicode in psi/zbfont.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-55549
DESCRIPTION:   xsltGetInheritedNsList in libxslt before 1.1.43 has a use-after-free issue related to exclusion of result prefixes.
CWE:   CWE-416: Use After Free
CVSS Source:   cve@mitre.org
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:N/I:H/A:H)

CVEID:   CVE-2025-24855
DESCRIPTION:   numbers.c in libxslt before 1.1.43 has a use-after-free because, in nested XPath evaluations, an XPath context node can be modified but never restored. This is related to xsltNumberFormatGetValue, xsltEvalXPathPredicate, xsltEvalXPathStringNs, and xsltComputeSortResultInternal.
CWE:   CWE-416: Use After Free
CVSS Source:   cve@mitre.org
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:N/I:H/A:H)

CVEID:   CVE-2024-46951
DESCRIPTION:   Artifex Ghostscript could allow a remote attacker to execute arbitrary code on the system, caused by an unchecked Implementation pointer in Pattern color space in psi/zcolor.c. By persuading a victim to open a specially crafted content, an attacker could exploit this vulnerability to execute arbitrary code ion the system.
CWE:   CWE-824: Access of Uninitialized Pointer
CVSS Source:   IBM X-Force
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-46952
DESCRIPTION:   Artifex Ghostscript is vulnerable to a buffer overflow, caused by improper bounds checking in the handling of a PDF XRef stream in pdf/pdf_xref.c. By persuading a victim to open a specially crafted content, a remote attacker could overflow a buffer and execute arbitrary code on the system.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   IBM X-Force
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-46953
DESCRIPTION:   Artifex Ghostscript could allow a remote attacker to execute arbitrary code on the system, caused by an integer overflow when parsing the filename format string (for the output filename) in base/gsdevice.c. By persuading a victim to open a specially crafted content, an attacker could exploit this vulnerability to execute arbitrary code on the system.
CWE:   CWE-190: Integer Overflow or Wraparound
CVSS Source:   IBM X-Force
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-46956
DESCRIPTION:   Artifex Ghostscript could allow a remote attacker to execute arbitrary code on the system, caused by an out-of-bounds data access in filenameforall in psi/zfile.c. By persuading a victim to open a specially crafted content, an attacker could exploit this vulnerability to execute arbitrary code ion the system.
CWE:   CWE-125: Out-of-bounds Read
CVSS Source:   IBM X-Force
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-24813
DESCRIPTION:   Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98. If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads - attacker knowledge of the names of security sensitive files being uploaded - the security sensitive files also being uploaded via partial PUT If all of the following were true, a malicious user was able to perform remote code execution: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - application was using Tomcat's file based session persistence with the default storage location - application included a library that may be leveraged in a deserialization attack Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue.
CWE:   CWE-44: Path Equivalence: 'file.name' (Internal Dot)
CVSS Source:   NVD
CVSS Base score:   9.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2021-31879
DESCRIPTION:   GNU Wget could allow a remote attacker to bypass security restrictions, caused by the failure to omit the Authorization header upon a redirect to a different origin. By sending a specially-crafted request, an attacker could exploit this vulnerability to bypass access restrictions.
CWE:   CWE-601: URL Redirection to Untrusted Site ('Open Redirect')
CVSS Source:   IBM X-Force
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N)

CVEID:   CVE-2024-10524
DESCRIPTION:   Applications that use Wget to access a remote resource using shorthand URLs and pass arbitrary user credentials in the URL are vulnerable. In these cases attackers can enter crafted credentials which will cause Wget to access an arbitrary host.
CWE:   CWE-918: Server-Side Request Forgery (SSRF)
CVSS Source:   IBM X-Force
CVSS Base score:   9.1
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N)

CVEID:   CVE-2025-31498
DESCRIPTION:   c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5.
CWE:   CWE-416: Use After Free
CVSS Source:   security-advisories@github.com
CVSS Base score:   8.3
CVSS Vector:   (CVSS:4.0/AV:N/AC:H/AT:N/PR:N/UI:N/VC:L/VI:L/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2024-24790
DESCRIPTION:   An unspecified error related to various Is methods (IsPrivate, IsLoopback, etc) did not work as expected for IPv4-mapped IPv6 addresses in the net/netip package in Golang Go has an unknown impact and attack vector.
CVSS Source:   CISA ADP
CVSS Base score:   9.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-8176
DESCRIPTION:   A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage.
CWE:   CWE-674: Uncontrolled Recursion
CVSS Source:   secalert@redhat.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2025-24928
DESCRIPTION:   libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a stack-based buffer overflow in xmlSnprintfElements in valid.c. To exploit this, DTD validation must occur for an untrusted document or untrusted DTD. NOTE: this is similar to CVE-2017-9047.
CWE:   CWE-121: Stack-based Buffer Overflow
CVSS Source:   cve@mitre.org
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:N)

CVEID:   CVE-2024-56171
DESCRIPTION:   libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a use-after-free in xmlSchemaIDCFillNodeTables and xmlSchemaBubbleIDCNodeTables in xmlschemas.c. To exploit this, a crafted XML document must be validated against an XML schema with certain identity constraints, or a crafted XML schema must be used.
CWE:   CWE-416: Use After Free
CVSS Source:   cve@mitre.org
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:N)

CVEID:   CVE-2025-24970
DESCRIPTION:   Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final. When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash. Version 4.1.118.Final contains a patch. As workaround its possible to either disable the usage of the native SSLEngine or change the code manually.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   security-advisories@github.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2024-2511
DESCRIPTION:   Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions Impact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.
CWE:   CWE-1325: Improperly Controlled Sequential Memory Allocation
CVSS Source:   CISA ADP
CVSS Base score:   5.9
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2024-4603
DESCRIPTION:   OpenSSL is vulnerable to a denial of service, caused by improper input validation by the EVP_PKEY_param_check() or EVP_PKEY_public_check() function. By parsing a specially crafted DSA public key or DSA parameters, a remote attacker could exploit this vulnerability to cause long delays, and results in a denial of service condition.
CWE:   CWE-606: Unchecked Input for Loop Condition
CVSS Source:   IBM X-Force
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2024-4741
DESCRIPTION:   Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
CWE:   CWE-416: Use After Free
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2024-5535
DESCRIPTION:   Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.
CWE:   CWE-200: Exposure of Sensitive Information to an Unauthorized Actor
CVSS Source:   IBM
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H)

CVEID:   CVE-2024-6119
DESCRIPTION:   Issue summary: Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process. Impact summary: Abnormal termination of an application can a cause a denial of service. Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an `otherName` subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program. Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address. TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
CWE:   CWE-843: Access of Resource Using Incompatible Type ('Type Confusion')
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)

CVEID:   CVE-2025-27831
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. The DOCXWRITE TXTWRITE device has a text buffer overflow via long characters to devices/vector/doc_common.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   9.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27832
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. The NPDL device has a Compression buffer overflow for contrib/japanese/gdevnpdl.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   9.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-27836
DESCRIPTION:   An issue was discovered in Artifex Ghostscript before 10.05.0. The BJ10V device has a Print buffer overflow in contrib/japanese/gdev10v.c.
CWE:   CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
CVSS Source:   CISA ADP
CVSS Base score:   9.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2024-21147
DESCRIPTION:   An unspecified vulnerability in Java SE related to the VM component could allow a remote attacker to cause high confidentiality, high integrity impacts.
CWE:   CWE-200: Exposure of Sensitive Information to an Unauthorized Actor
CVSS Source:   IBM X-Force
CVSS Base score:   7.4
CVSS Vector:   (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N)

CVEID:   CVE-2025-21502
DESCRIPTION:   Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Oracle Java SE: 8u431-perf, 11.0.25, 17.0.13, 21.0.5, 23.0.1; Oracle GraalVM for JDK: 17.0.13, 21.0.5, 23.0.1; Oracle GraalVM Enterprise Edition: 20.3.16 and 21.3.12. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N).
CWE:   CWE-863: Incorrect Authorization
CVSS Source:   secalert_us@oracle.com
CVSS Base score:   4.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2025-31651
DESCRIPTION:   Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in Apache Tomcat. For a subset of unlikely rewrite rule configurations, it was possible for a specially crafted request to bypass some rewrite rules. If those rewrite rules effectively enforced security constraints, those constraints could be bypassed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.5, from 10.1.0-M1 through 10.1.39, from 9.0.0.M1 through 9.0.102. Users are recommended to upgrade to version [FIXED_VERSION], which fixes the issue.
CWE:   CWE-116: Improper Encoding or Escaping of Output
CVSS Source:   NVD
CVSS Base score:   9.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-31650
DESCRIPTION:   Improper Input Validation vulnerability in Apache Tomcat. Incorrect error handling for some invalid HTTP priority headers resulted in incomplete clean-up of the failed request which created a memory leak. A large number of such requests could trigger an OutOfMemoryException resulting in a denial of service. This issue affects Apache Tomcat: from 9.0.76 through 9.0.102, from 10.1.10 through 10.1.39, from 11.0.0-M2 through 11.0.5. Users are recommended to upgrade to version 9.0.104, 10.1.40 or 11.0.6 which fix the issue.
CWE:   CWE-459: Incomplete Cleanup
CVSS Source:   NVD
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2024-56406
DESCRIPTION:   A heap buffer overflow vulnerability was discovered in Perl. Release branches 5.34, 5.36, 5.38 and 5.40 are affected, including development versions from 5.33.1 through 5.41.10. When there are non-ASCII bytes in the left-hand-side of the `tr` operator, `S_do_trans_invmap` can overflow the destination pointer `d`.    $ perl -e '$_ = "\x{FF}" x 1000000; tr/\xFF/\x{100}/;'    Segmentation fault (core dumped) It is believed that this vulnerability can enable Denial of Service and possibly Code Execution attacks on platforms that lack sufficient defenses.
CWE:   CWE-122: Heap-based Buffer Overflow
CVSS Source:   CISA ADP
CVSS Base score:   8.6
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H)