QRadar M6 xSeries firmware V10.0.0 for 1U and 2U appliances (IMG for USB on prem installations)

Release Notes

Abstract

This firmware update (v10.0.0) provided by IBM is intended for xSeries firmware updates on your IBM® Security QRadar® M6 appliances. This update is intended for M6 1U and 2U form factor QRadar appliances where administrators want to update appliances with a bootable USB drive to complete an on prem firmware update.

Content

Important: Select a tab to read each step of the firmware procedure.

Part 1: About the M6 firmware 10.0.0 update

Creating your USB flash drive for the firmware update requires a Windows™ host and the administrator must be on site with the appliance. The firmware update can take up to 60 minutes complete per appliance and the administrator is required to reboot the appliance after the firmware installation completes. The firmware upgrade procedures are intended for scheduled maintenance hours. If your data center does not allow USB keys, instructions and a download are available for administrators to install firmware remotely with the XClarity interface. For information about firmware updates over XClarity interfaces, see https://www.ibm.com/support/pages/node/6998777.

Supported appliances, types, and model information

This firmware update applies to the following IBM Security QRadar M6 (1U and 2U form factor) appliance types:

Hardware	Details
Appliance and machine type model (MTM)	1U IBM QRadar Core Appliance XX05 G4 (4563-Q3E) IBM QRadar Event/QFlow Collector Appliance 1501/1201 G4 (4563-Q5D) IBM QRadar Network Insights Appliance 1901 G2 (4563-F8Y) IBM QRadar Network Insights Appliance 1910 G2 (4563-F7Y) IBM QRadar Core Appliance XX48 G2 (4563-Q5B) 2U IBM QRadar Network Insights Appliance 1920 G2 (4563-F5F) IBM QRadar Incident Forensics Appliance G4 (4563-F3A) IBM QRadar Core Appliance XX29 G2 (4563-Q4A) IBM QRadar Network Packet Capture Appliance G2 (4563-F3C) IBM QRadar Network Insights 1940 (4563-F6G)
Server Type	M6
Server Machine Type	SR630 / M6 1U SR650 / M6 2U

Table 1: List of QRadar appliances the M6 firmware 10.0.0 can update.

Important file changes and prerequisites in this firmware update

Administrators must ensure that their M6 appliance includes the minimum version outlined in the Prerequisite version column. If your M6 appliance does not meet the prerequisite versions outlined in the table, the administrator must contact IBM QRadar Support to discuss a custom upgrade path for your M6 appliance.

Update: Depending on your initial firmware version, you might be required to meet a new UEFI prerequisite. If your current firmware does not have UEFI 3.0.0 and XCC 5.40 installed, which is required to upgrade your appliance firmware to V7.1.0, you can install the M6 V5.0.0 firmware, then upgrade to V10.0.0.

Component	Prerequisite version	Version in this update	File name
UEFI/BIOS	ive172f-3.0.0 or later cdi364m-5.40 or later Note: Installing M6 V5.0.0 or later meets both the UEFI and XCC requirements before you attempt to upgrade to M6 7.1.0 firmware.	ive182m-4.11	lnvgy_fw_uefi_ive182m-4.11_anyos_32-64.uxz
XCC	None	cdo3b2h-9.80	oem_fw_xcc_cdo3b2h-9.80_anyos_noarch.uxz
LXPM	None	pdl144d-2.09	lnvgy_fw_lxpm_pdl144d-2.09_anyos_noarch.uxz
RAID controller	None	530-51.20.0-4374-0 930-51.22.0-4634-2	lnvgy_fw_raid_mr3.5.530-51.20.0-4374-0_linux_x86-64.bin lnvgy_fw_raid_mr3.5.930-51.22.0-4634-2_linux_x86-64.bin
HDD	None	1.39.11-0	lnvgy_fw_drives_all-1.39.11-0_linux_x86-64.bin
PCi and LOM adapters	None	9.2-6.2-1.3357.0-2	intc-lnvgy_fw_nic_net-9.2-6.2-1.3357.0-2_linux_x86-64.bin
Emulex	None	35-14.0.376.28-4	elx-lnvgy_fw_fc_lp.35-14.0.376.28-4_linux_x86-64.bin

Table 2: Firmware versions and any prerequisite for each component are provided in this table.

NOTES

A number of hard disk drives can be installed in this appliance. The HDD update tool examines the hard disk drives that are present and selects the latest firmware version that is available for your drive.
The base system pack might contain other firmware packages that are not present in QRadar appliances. Firmware updates from the base system pack can be listed when the tool compares available firmware to the hardware in the appliance and display a status of "undetected".
For general firmware questions and information, see our FAQ page at http://ibm.biz/qradarfirmware.

Security issues resolved in this firmware update

The table lists the software versions and CVEs addressed in the firmware release.

Component	File name	Updates
UEFI/BIOS	nvgy_fw_uefi_ive182m-4.11_anyos_32-64.uxz	Resolved CVEs CVE-2022-32231, CVE-2022-43505 Enhancements Do not highlight "F1:System Setup" in POST screen if Shift + F1 are pressed. Support domain name as the input of OneCLI iSCSI.TargetIp. Supports 20 or more boot devices in Boot manager > Change Boot Order. Fixes Updated SPS to SPS_E5_04_01_05_002_0 Updated MCU to MB750654_02007006, MBF50656_04003604, MBF50657_05003604 Updated DBX March 2023 / MAY 2023 to address PSIRT issue LEN-127392 / LEN-119523. Note: User could take one of the two methods below to apply the default DBX, but it will reset all keys to default, so customer need re-add their customer keys after the operation. 1. Go to setup menu, Security > Secure Boot Configuration > Secure Boot Policy, select Reset All Keys to Default, then save and exit setup. 2. Use the OneCLI command below to update the new DBX: OneCli.exe config set SecureBootConfiguration.SecureBootPolicy “Reset All Keys to Default” - -imm <USERID>:<PASSW0RD>@<IP> Fixed the issue that XCC web can not show the detailed inventory information for generic onboard SATA drive. Fixed the issue that AMT (Advanced Memory Test) fails to be triggerred by OneCLI or LXPM if System Settings > Memory > Memory Test is configured as Disabled. Fixed wrong behavior of setup menu "Initiator IP Address", "Initiator Subnet Mask" and "Gateway" at page System Settings > Network > iSCSI Settings > Host iSCSI Configuration > Attemp # in System Setup Utility. Fixed the issue that system still boot to legacy PXE when setting DevicesandIOPorts.OnboardLanPort# to "UEFI" by OneCLI if "System Settings > Legacy BIOS > Rehook INT 19h" is enabled. Fixed the issue that multiple "Adapters xx:xx:xx" are displayed on XCC web Inventory section if the cable of ThinkSystem 1611-8P PCIe Gen4 NVMe Switch Adapter is not installed. (Tip# 103810). Fixed the issue that setup item "System Settings > Legacy BIOS > Rehook INT 19h" does not work for legacy boot. Fixed the issue that Linux efibootmgr cannot show "BootCurrent" after setting IPMI next one time boot.
XCC	oem_fw_xcc_cdo3b2h-9.80_anyos_noarch.uxz	Resolved CVEs CVE-2015-3414, CVE-2015-3415, CVE-2015-3416, CVE-2016-6153, CVE-2017-3735, CVE-2017-3736, CVE-2017-3737, CVE-2017-3738, CVE-2017-5130, CVE-2017-6451, CVE-2017-6452, CVE-2017-6455, CVE-2017-6458, CVE-2017-6459, CVE-2017-6460, CVE-2017-6462, CVE-2017-6463, CVE-2017-6464, CVE-2017-7407, CVE-2017-8816, CVE-2017-8817, CVE-2017-10989, CVE-2017-12799, CVE-2017-12967, CVE-2017-13710, CVE-2017-14129, CVE-2017-14130, CVE-2017-14333, CVE-2017-14529, CVE-2017-14930, CVE-2017-14932, CVE-2017-14933, CVE-2017-14934, CVE-2017-14938, CVE-2017-14939, CVE-2017-14940, CVE-2017-14974, CVE-2017-15020, CVE-2017-15021, CVE-2017-15022, CVE-2017-15023, CVE-2017-15024, CVE-2017-15025, CVE-2017-15225, CVE-2017-15938, CVE-2017-15939, CVE-2017-15996, CVE-2017-16544, CVE-2017-16931, CVE-2017-16932, CVE-2017-17484, CVE-2017-1000100, CVE-2017-1000101, CVE-2017-1000254, CVE-2017-1000257, CVE-2017-1000494, CVE-2018-6872, CVE-2018-1000005, CVE-2018-1000007, CVE-2018-1000120, CVE-2018-1000121, CVE-2018-1000122
LXPM	lnvgy_fw_lxpm_pdl144d-2.09_anyos_noarch.uxz	None
RAID controller	lnvgy_fw_raid_mr3.5.530-51.20.0-4374-0_linux_x86-64.bin lnvgy_fw_raid_mr3.5.930-51.22.0-4634-2_linux_x86-64.bin	None
HDD	lnvgy_fw_drives_all-1.39.11-0_linux_x86-64.bin	None
PCi and LOM adapters	intc-lnvgy_fw_nic_net-9.2-6.2-1.3357.0-2_linux_x86-64.bin	None
Emulex	elx-lnvgy_fw_fc_lp.35-14.0.376.28-4_linux_x86-64.bin	None

Table 3: Security issues resolved in the M6 firmware update 10.0.0.

Part 2: Requirements to create a bootable USB drive

To create a bootable USB key, you must have access to the following items:

An 8 GB or larger USB flash drive.
Entitlement for IBM Fix Central is required download firmware for QRadar appliances.
A workstation or laptop running one the following operating systems:
- Windows™ 10
- Windows™ 7
- Windows™ Server 2008R2
- Windows™ Server 20016
  NOTE: Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.

Creating the bootable USB drive

Download the QRadar M6 appliance firmware from IBM Fix Central for QRadar 7.5.x: IBM Fix Central M6 firmware 10.0.0 IMG download
Note: Administrators can download 7.5.x software for any QRadar version as firmware downloads are identical for QRadar 7.4.x or 7.5.x on IBM Fix Central.
Download the Rufus Bootable USB Tool.
Insert the USB flash drive into a USB port on your Windows™ laptop or workstation.

Open Rufus and configure the properties.

Parameter	Value
Device	Select your USB drive
Boot Selection	Select Qradar_IMG_M6_1U_SR630_7X02_2U_SR650_7X06_10_0_0.img
Partition scheme	MBR (Default)
Target system	BIOS (or UEFI-CSM) (Default)
File system	FAT32 (Default)
Cluster size	This value defaults to the best option based on size of the USB drive.

For example,

Click Start. The image is loaded on the USB drive.
After the installation finishes, safely eject the USB flash drive from your computer.

Results
The bootable drive is ready to be used to install firmware on the M6 appliance.

Part 3. Installing the Firmware on the QRadar M6 appliance

The instructions are intended for M6 appliances that are not configured as HA (high-availability) pairs. If your appliance is in a HA pair, you must use the High-Availability update instructions found here: http://www.ibm.com/support/docview.wss?uid=swg27047121#HA .

Booting from the USB Drive

Insert the USB drive that has the bootable image into the QRadar appliance.
IMPORTANT: Do not remove the USB flash drive until the IBM ToolsCenter completes the firmware installation.
From the terminal or the KVM switch for the appliance, log in with root user credentials.
From the command prompt, type: reboot
As the appliance reboots, press F12.
From the Boot Devices Manager, verify the Legacy Mode check box is clear (NOT selected).
Locate your USB drive in the Boot Devices Menu and press Enter.
In the Update Settings menu, verify all check boxes are clear (not selected) and click Next.
In the Update Comparison menu, click Begin.
The IBM UpdateXpress System Pack Installer compares the current package with the installed firmware.
Verify all check boxes are selected where new firmware versions are available and click Next.
IMPORTANT: Administrators must review the New Version column and confirm the firmware update is selected (checked). Issues were reported where firmware changes were not installed in prior releases.
Note: The image provided is an example only. Firmware versions during your update will differ from the example image.
Wait for the firmware updates to load.
Click Begin Update to install the firmware.

NOTE: Administrators might be prompted with a confirmation dialogue and need to click Next to continue.
Verify that all updates complete successfully and click Next.
If you experienced any errors, click Save Log or click Finish to exit after a successful installation.
The appliance must reboot to complete the firmware installation.

Results
The appliance reboots and is available for use in the QRadar deployment. If you experience any installation issues, you can contact QRadar Support for assistance and open a software support case for your appliance. The support representative can onsite request the firmware logs for review to determine the root cause of the issue or if replacement hardware is required. If the issue is hardware-related, the support representative can change the case type and involve the proper teams to schedule replacement parts.

[{"Line of Business":{"code":"LOB24","label":"Security Software"},"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSBQAC","label":"IBM Security QRadar SIEM"},"ARM Category":[{"code":"a8m0z000000cwtcAAA","label":"Hardware"}],"ARM Case Number":"","Platform":[{"code":"PF016","label":"Linux"}],"Version":"All Version(s)"}]

Tips