IBM Support

System Jobs

Troubleshooting


Problem

This note provides a short description of the system jobs used by the operating system. On the WRKACTJOB command display, system jobs are listed alphabetically after all the subsystems and user jobs.

Resolving The Problem

System jobs are created and used by the operating system to control system resources and process other system-wide requests. On the WRKACTJOB command display, system jobs are listed alphabetically after all the subsystems and user jobs.

System jobs are initiated during an IPL and remain active as long as the operating system is up and running. System jobs cannot be started, ended, held, or changed by the user.

NOTE: There are a few system jobs which can be changed using the CHGSYSJOB command. The only attribute that can be changed by the CHGSYSJOB command is the run priority for these jobs. These exceptions are QALERT, QCMNARBxx, QDBSRVXR2, QSPLMAINT, and QSYSCOMM1.

The most current information on system jobs will be found in the IBM KnowledgeCenter

Following is a list of all the systems jobs:

QALERT - Alert Manager
The alert manager system job performs the tasks necessary to process alerts. This includes such activities as processing alerts received from other systems, processing locally created alerts, and maintaining the sphere of control. QALERT job priority can be changed using the CHGSYSJOB command.
QCMNARBxx - Communications Arbiters
The communications arbiters process work for all types of devices rather than only for communications devices. This work includes communications connect, disconnect, device locking, and error recovery processing. All device-related work is spread throughout the QCMNARBxx jobs and QSYSARB.

The QCMNARB system value determines the number of communications arbiter jobs that are started. If QCMNARB is set to *CALC, the system starts two communications arbiters per processor, with a minimum of three communications arbiters started. If QCMNARB is set to 0, the work will be run in QSYSARB. QCMNARBxx job priority can be changed using the CHGSYSJOB command.
QDBFSTCCOL - Database File Statistic Collection
This job collects database file statistics. These statistics are crucial to proper database query optimization.

QDBSRVXR - Database Cross-Reference
QDBX###XR - Database Cross-Reference for Independent Disk Pool Group ###
This job maintains each of the file level system cross-reference files in QSYS. These files contain cross-reference information about data base files and SQL information across the system. The files all begin with the prefix of QADB in library QSYS. The primary file that must be maintained is QADBXREF, the file cross-reference file. It contains a record for each physical database, logical database, DDMF, and ALIAS file on the system. QDBSRVXR activates when a file is created, changed, deleted, restored, renamed, or it’s ownership is changed.

QDBSRVXR2 -Database Cross-Reference 2
QDBX###XR2 - Database Cross-Reference 2 for Independent Disk Pool Group ###
This job maintains the two field-level cross-reference files. QADBIFLD in library QSYS is the field cross-reference file. QADBKFLD in library QSYS is the key field cross-reference file. QDBSRVXR2 is activated to perform its field-related work whenever a file is created, changed, or deleted. QDBSRVXR2 job priority can be changed using the CHGSYSJOB command.
QDBSRV01 - Database Server
QDBS###V01 - Database Server for Independent Disk Pool Group ###
This job can be viewed as the database maintenance task dispatcher. The number of database server jobs on the system is one plus twice the number of processors, or one plus twice the number of Auxiliary Storage Pools (ASPs), whichever is greater. The minimum started is five.

QDBSRV01 is the main system job assigning work to the others. Typically, QDBSRV01 will be most active immediately following the restore of a library that contains database files. Its function includes:
o Signaling to the SMAPP (System Managed Access Path Protection) Licensed Internal Code tasks that new access paths have been restored. SMAPP then determines if these access paths need to be protected.
o Preparing the list of access paths that are required to be rebuilt because the access paths were not restored. This is the list that is viewed using the EDTRBDAP command.
Of the remaining database server jobs, the first half process high priority requests, and the second half process low priority requests. For example, on a 4-way system there will be 9 QDBSRVxx system jobs. QDBSRV01 assigns work. QDBSRV02 - 05 are high priority, QDBSRV06 - 09 are low priority.

QDBSRVxx - Database Server (high priority)
QDBS###Vxx - Database Server (high priority) for Independent Disk Pool Group ###
These jobs perform journal and commitment control maintenance for the system and are considered quick or short running work
QDBSRVxx - Database Server (low priority)
QDBS###Vxx - Database Server (low priority) for Independent Disk Pool Group ###
These jobs perform access path maintenance on user database files. Typically these jobs are inactive; however, in certain cases they may activate to perform access path rebuilds. The access paths that are being maintained can be viewed using the EDTRBDAP command. Some reasons why these jobs could be active are:
o Restore of database files that were not saved with access paths
o Restore of logical files without the physical file they are based upon
o Canceling of a RGZPFM command while in process
o Invalidation of an index due to damage found upon it
o Post the operating system installation activity to complete cross-reference or other IBM® DB2® upgrade activity
o Constraint Verification. The EDTCPCST command shows constraints that are awaiting completion of such verification.
QDCPOBJx - Decompress System Object
These jobs decompress newly installed operating system objects as needed. There is a storage requirement for these jobs to run., If your system drops below a certain limit, these jobs terminate. The number of decompress system object jobs is the number of processors plus one. These jobs end when all object decompression is completed.

QFILESYS1 - File System
The file system job supports the background processing of the integrated file system. It ensures that changes to files are written out to storage and performs general file system cleanup activities.
QJOBSCD - Job Schedule
QJOBSCD controls the job scheduling functions of the basic job scheduler. QJOBSCD monitors the timers for job schedule entries and scheduled jobs.
QLI###CL - Library Cleanup for Independent Disk Pool Group ###
This job cleans up libraries on independent disk pools.

QLI###RP - Object Cleanup for Independent Disk Pool Group ###
This job cleans up replaced objects on independent disk pool libraries.
QLPSVR - Software Agreements Acceptance
This job is automatically started during an IPL if online software agreements need to be accepted. The job ends when all agreements are either accepted or declined.
QLUR - LU 6.2 Resynchronization
QLUR handles the two-phase commit resynchronization processing.
QLUS - Logical Unit Services
QLUS processes the event handling for logical unit devices (communications devices). It is also responsible for allocating devices to the correct communications subsystem.
QNWHARBxx – Network host adapter
The Network Host Adapter system jobs handle events related to the Network Server Host Adapter (NWSH) devices. There will always be at least one of these jobs started during the IPL.
QPFRADJ - Performance Adjustment
The performance adjustment system job manages changes to the storage pool sizes and activity levels. All requests to change storage pools are processed by this job. In addition, if system value QPFRADJ is set to a value of '2' or '3,' this job dynamically changes the sizes and activity levels of storage pools to improve the performance of the system.
QQQTEMP1 and QQQTEMP2 - Database Parallelism
The database parallelism system jobs perform asynchronous database processing for the DB2 Multisystem. If users query distributed files, the jobs are used to speed up the queries by doing certain tasks in parallel.
QSPLMAINT - System Spool Maintenance
QSPMN##### - System Spool Maintenance for Independent Disk Pool Group ###
QSPLMAINT performs system spool maintenance functions that include:
o Clears the spooled database member which contained a deleted spooled file's data and attributes
o Deletes the spooled database members that have not been reused within the time specified in Automatically clean up unused printer output storage (QRCLSPLSTG) system value
QSPLMAINT job priority can be changed using the CHGSYSJOB command.

QSPPF##### - System Spool PRTQ Updater for Independent Disk Pool Group ###
This job performs spooled file operations for the specific independent disk pool group.

QSPRC00001 - System Spool Recovery
QSPRC##### - System Spool Recovery for Independent Disk Pool Group ###
The System Spool Recovery performs system spooling functions that include:
o Spooled file cleanup after an IPL or an independent disk pool group is varied on
o Moves stranded spooled files of damaged user output queues into the output queue QSPRCLOUTQ in library QRCL or QRCL#####.

QSPPF00001 - System Spool Print Queue Updaters
QSPPF##### and QSPP2##### - System Spool Print Queue Updaters for Independent Disk Pool Group ###
These jobs perform spooled file operations for either the system disk pool or a specific independent disk pool group.

QSYSARB - System Arbiter
The system arbiter provides the environment for the running of high-priority functions. It handles system resources and keeps track of the state of the system. QSYSARB is the central and highest priority job within the operating system. The system arbiter responds to system-wide events that must be handled immediately and those that can be handled more efficiently by a single job than multiple jobs. QSYSARB is responsible for processing communications requests, device locking, line, controller, and device configuration, and handling of other system-wide resources.

QSYSARB2 - System Arbiter
System Arbiter2 is responsible for managing tape resources, handling Command Analyzer spaces for command processing, and other system-wide processing for the operating system.

QSYSARB3 - System Arbiter
System Arbiter3 is responsible for creating and maintaining the job structures on the system. Whenever temporary or permanent job structures are required for job initiation, the request is processed by QSYSARB3. QSYSARB3 also starts and ends many of the system jobs.

QSYSARB4 - System Arbiter
System Arbiter4 is responsible for starting and ending subsystems. This includes the initial processing for PWRDWNSYS.

QSYSARB5 - System Arbiter
System Arbiter5 is responsible for processing machine events. This includes handling events to support Auxiliary power, Continuous Powered Mainstore, System ASP and storage threshold, and Lock table limits. Usually, the machine events are handled and a corresponding CPF message is sent to QSYSOPR and QHST.

QSYSCOMM1 - System Communications
The system communications job handles some communications and I/O system activity. QSYSCOMM1 job priority can be changed using the CHGSYSJOB command.

QTAPARB - Tape Devices
This job processes work related to tape devices including device locking and error recovery processing.

QTCPCTL – TCP Control
The TCP Control system job will handle all requests for activating and deactivating TCP/IP interfaces.

QTCPWRK – TCP Work
The TCP Work system job will attempt to activate all TCP/IP interfaces for which AUTOSTART(*YES) is specified.

QWCBTCLNUP - Job Table Cleanup
QWCBTCLNUP is used during the IPL to ensure that the job structures are available for use. It usually completes processing before the end of the IPL; however, it can continue running after the IPL if there are a lot of job structures to clean up. This system job ends when it completes processing.

QWCPJOBS – Permanent Job Structures
The Permanent Job Structures system job handles the background cleanup of permanent job structures.

QWCTJOBS – Temporary job structures
The Temporary Job Structures system job handles the background cleanup of temporary job structures,

Q400FILSVR - Remote File System Communications
The remote file system communication system job performs the Common Programming Interface Communications (APPN or APPC) for the Remote File System.

SCPF - Start Control Program Function
The SCPF system job is the central job during the operating system IPL, providing the environment and directing the functions necessary to start the operating system. SCPF starts all the other system jobs, (except QLUS, which is started by QSYSARB) and brings the system up to a usable state.

SCPF remains active after the IPL providing an environment for the running of low-priority and possibly long-running system functions. SCPF also runs during the PWRDWNSYS processing and is the job that terminates the machine processing.

[{"Type":"MASTER","Line of Business":{"code":"LOB08","label":"Cognitive Systems"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SWG60","label":"IBM i"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.1.0"}]

Historical Number

21440455

Document Information

Modified date:
05 October 2020

UID

nas8N1017585