IJ44442: MASTER TASK CARD CONFIGURATION RULES DON'T WORK ON TASKS CREATED WITHIN OMP

APAR status

• Closed as program error.

Error description

• Description:
  Master Task Card configuration rules don't work on tasks created
  within OMP
  
  STEPS TO REPRODUCE:
  
  SCENARIO 1: (Working correctly: When you create a Task Card
  outside of the OMP)
  1. Login to Maximo as maxadmin
  
  2. Go to Models --> X-COPTER --> Build Hierarchy and Position
  Rules
  
  3. Expand the Build Hierarchy and select 'APU' build item
  
  4. Scroll down to Part Numbers section
  Part number is 36-150
  
  5. Go to Master Task Card application and create a new Master
  Task Card MTC01
  Master Task Card Type: Component
  Operator: IBM
  
  6. Scroll down to Part Number section --> New Row --> 36-150
  
  7. Go to Frequency Tab --> Intervals and Thersholds --. Standard
  Interval tab --> New Row
  Frequency Type: Meter
  Frequency: 600
  Frequency Units: FH
  
  8. Save the record
  
  9. Change Status of MTC01 to Active
  
  10. Go to Aircraft application --> IBM-XCA
  
  11. Right click on the top level node in the Build Hierarchy -->
  BDI Status
  
  12. Validate Configuration (i.e Run the BDI)
  
  13. Go to BDI Actions tab --> refresh list
  BDI has created a job to create PM from our new Master Task Card
  
  
  14. Click ok to close the dialog
  
  15. Expand the Aircraft Hierarchy --> Select APU build item
  
  16. Scroll down to Maintenance Plan sub-tab
  You can see MTC01 listed here.
  
  Now we want to add this aircraft to an OMP
  
  17. Go to OMP --> Create a New OMP --> X-COPTER
  Operator: IBM
  Authority: EASA
  
  18. Save the OMP
  
  19. Go to Models Tab --> New Row --> X-COPTER
  
  20. Go to Effectivity Tab --> Select Aircraft --> XCOP001
  
  21. Go back to OMP tab --> OMP Tasks --> New Row --> Select
  MTC01 on Master Task Card field --> Save the record
  
  22. Change status --> Submitted for Approval --> Change Status
  --> Active
  
  23. Go to Models --> X-COPTER
  
  24. Go to Configurations Tab --> Expand the variant --> 1
  Variant; X-COPTER is present
  
  25. Go to Build Hierarchy and Position Rules Tab --> Select APU
  position
  
  26. Go to Maintenance Plan sub-tab --> Configuration section -->
  Uncheck the X-COPTER variant
  
  27. Scroll up and go to Advanced Tab
  A rule has been created that the Master Task Card for the part
  number 36-150 is no longer valid for the variant X-COPTER
  
  28. Go back to the Aircraft application --> XCOP001
  
  29. Right click on the top level node in the Build Hierarchy -->
  BDI Status
  
  30. Validate Configuration (i.e Run the BDI)
  
  31. Go to BDI Actions tab --> refresh list
  BDI has created a job to deactivate the Master Task Card status
  
  SCENARIO 2: (PROBLEM: When the Task Card is created from within
  the OMP)
  
  1. Go to Master Task Card (MTC) --> MTC01 --> Duplicate this
  Master Task Card and rename it to MTC02
  
  2. Save the MTC
  
  3. Go to OMP application --> X-COPTER
  
  4. More Actionos --> Revise OMP
  
  5. OMP Tasks --> New Row --> Select MTC01 on Master Task Card
  field --> Save the record
  
  6. Change status --> Submitted for Approval --> Change Status
  --> Active
  
  7. Go to Aircraft application --> IBM-XCA
  
  8. Expand the Aircraft Hierarchy --> Select APU build item
  
  9. Scroll down to Maintenance Plan sub-tab
  You can see MTC02 listed here.
  
  10. Go to Models --> X-COPTER
  
  11. Go to Configurations Tab --> Expand the variant --> 1
  Variant; X-COPTER is present
  
  12. Go to Build Hierarchy and Position Rules Tab --> Select APU
  position
  
  13. Go to Maintenance Plan sub-tab --> Select MTC02 -->
  Configuration section --> Uncheck the X-COPTER variant
  
  14. Scroll up and go to Advanced Tab
  A rule has been created that the Master Task Card for the part
  number 36-150 is no longer valid for the variant X-COPTER
  
  15. Go back to the Aircraft application --> XCOP001
  
  16. Right click on the top level node in the Build Hierarchy -->
  BDI Status
  
  17. Validate Configuration (i.e Run the BDI)
  
  18. Go to BDI Actions tab --> refresh list
  
  RESULT:
  BDI does not create a job to deactivate the Master Tasl Card
  status
  
  EXPECTED RESULT:
  BDI should create a job to deactivate the Master Task Card
  status
  
  PRODUCT:
  Aviation 7682
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * MAXIMO                                                       *
  ****************************************************************
  * PROBLEM DESCRIPTION:                                         *
  * MASTER TASK CARD CONFIGURATION RULES DON'T WORK ON TASKS     *
  * CREATED WITHIN OMP                                           *
  ****************************************************************
  

Problem conclusion

• The fix for this APAR is contained in the following maintenance
  package: release\fix pack for Release 8.x Product
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  MAXIMO FOR AVIA

• Fixed component ID

  5725U8700

Applicable component levels