News
Abstract
IBM® API Connect v10.0.1.6-ifix1 is now available.
Content
IBM® API Connect v10.0.1.6-ifix1 delivers important updates to address Spring4Shell global threat.
For more information about API Connect v10.0.1.6-ifix1, see API Connect IBM® Knowledge Center "What's New"
For new deployments: You can do a full installation that uses 10.0.1.6-ifix1
When upgrading from API Connect v10.0.1.2 or greater on VMware:There are no special considerations required. Apply 10.0.1.6-ifix1. Follow the instructions here. The steps apply when upgrading from v10.0.1.2 (with or without ifixes) to v10.0.1.6-ifix1.
When upgrading from API Connect v10.0.1.1 or earlier: Read the following section:
- Special note when API Connect v10.0.1.1 or earlier is deployed that uses Virtual Appliances (OVAs) on VMware: v10.0.1.6-ifix1 includes virtual appliances with a newer version of the operating system that requires a version migration to new virtual appliances. This procedure must be completed to move your product data. If the deployment is on v10.0.1.2 or greater this method does not apply. If you are performing a fresh installation of v10, it is highly recommended you begin with the latest delivery of v10.
- Special note when API Connect v10.0.1.1 or earlier is deployed on OpenShift v4 or any other Kubernetes platforms: Due to changes in Kubernetes operator, you must first upgrade to 10.0.1.2-ifix2, and then apply v10.0.1.5. Find information on upgrading to v10.0.1.2-fix2
Read the following section for special updates regarding moving from API Connect v2018 to v10:
- Upgrading from API Connect v2018 to v10 can be accomplished using specific combinations of v2018.4.1.17 or above and v10.0.1.x.
- For deployments on Kubernetes: An in-place upgrade path is available. To move to v10.0.1.5, v2018 must first be at v2018.4.1.17 or above, and Kubernetes must be at a version supported by v10.0.1.5 (see system requirements in IBM® Compatibility Reports.). See details here
- For deployments on VMware: A version migration path is available, where data is backed up from v2018 virtual appliances (OVAs) and data is restored into new v10.0.1.5 virtual appliances (OVAs) deployed separately. During the migration process, v2018 virtual appliances must be powered off. The gateways may remain powered on during the upgrade process of Manager, Portal, and Analytics subsystems. To move to v10.0.1.5, v2018 must first be at v2018.4.1.17 or above. See the IBM® Knowledge Center page for detailed instructions. More storage is required on v2018 OVAs during the upgrade process to perform the backup. See requirements here
- Find planning and overview materials related to moving from v2018 to v10 at API Connect: Upgrade Central
API Connect v10.0.1.6-ifix1 contains all field APARs included in v10.0.1.6
Downloads:
Full installation files for IBM® API Connect v10.0.1.6-ifix1 can be downloaded with proper entitlement from Fix Central.
| Description – Filename | Date Published |
|
IBM® API Connect Analytics v10.0.1.6-ifix1 for VMWare
|
27 April 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.6-ifix1
|
27 April 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.6-ifix1 for Linux
|
27 April 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.6-ifix1 for OSX
|
27 April 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.6-ifix1 for Windows
|
27 April 2022 |
|
IBM® API Connect v10.0.1.6-ifix1 for Containers
|
27 April 2022 |
|
IBM® API Connect Operator Release Files v10.0.1.6-ifix1 for Containers
|
27 April 2022 |
| IBM® API Connect Operator Upgrade Release Files v10.0.1.6-ifix1 for Containers apiconnect-operator-upgrade-release-files_10.0.1.6-ifix1.zip |
27 April 2022 |
|
IBM® API Connect Install Assist v10.0.1.6-ifix1 for Linux®
|
27 April 2022 |
|
IBM® API Connect Install Assist v10.0.1.6-ifix1 for Mac
|
27 April 2022 |
|
IBM® API Connect Install Assist v10.0.1.6 for Windows
|
27 April 2022 |
|
IBM® API Connect Management v10.0.1.6-ifix1 for VMWare
|
27 April 2022 |
|
IBM® API Connect Developer Portal v10.0.1.6-ifix1 for VMWare
|
27 April 2022 |
|
IBM® API Connect Toolkit v10.0.1.6-ifix1 for Linux®
|
27 April 2022 |
|
IBM® API Connect Toolkit Designer with Loopback v10.0.1.6-ifix1 for Linux®
|
27 April 2022 |
|
IBM® API Connect Toolkit Designer with Loopback v10.0.1.6-ifix1 for Mac
|
27 April 2022 |
|
IBM® API Connect Toolkit Designer with Loopback v10.0.1.6-ifix1 for Windows
|
27 April 2022
|
|
IBM® API Connect Toolkit with Loopback v10.0.1.6-ifix1 for Linux®
|
27 April 2022 |
| IBM® API Connect Toolkit with Loopback v10.0.1.6-ifix1 for Mac | 27 April 2022 |
| IBM® API Connect Toolkit with Loopback v10.0.1.6-ifix1 for Windows | 27 April 2022 |
|
IBM® API Connect Toolkit v10.0.1.6-ifix1 for Mac
|
27 April 2022 |
|
IBM® API Connect Toolkit v10.0.1.6-ifix1 for Windows
|
27 April 2022 |
|
IBM® API Connect Analytics v10.0.1.6-ifix1 Upgrade File
|
27 April 2022 |
|
IBM® API Connect Management Server Upgrade File v10.0.1.6-ifix1
|
27 April 2022 |
|
IBM® API Connect v10.0.1.6-ifix1 Portal Upgrade File
|
27 April 2022 |
| IBM® API Connect script and assets required for v10->v10.0.1.6-ifix1 side-by-side upgrades v10_ova_dr_files_10.0.1.6-ifix1.tgz |
27 April 2022 |
| IBM® API Connect scripts and assets required for v2018->v10.0.1.6-ifix1 side-by-side upgrades v2018_ova_upgrade_files_10.0.1.6-ifix1.tgz |
27 April 2022 |
|
IBM® API Connect Security Signature Bundle File v10.0.1.6-ifix1
|
27 April 2022
|
API Connect v10.0.1.6-R3 Migration Utility
| Description – Filename | Date Published |
|
IBM® API Connect Migration Utility v10.0.1.6-R3
|
17 June 2022 |
[{"Line of Business":{"code":"LOB45","label":"Automation"},"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSMNED","label":"IBM API Connect"},"ARM Category":[{"code":"a8m50000000L0rvAAC","label":"API Connect"}],"ARM Case Number":"","Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"All Version(s)"}]
Was this topic helpful?
Document Information
Modified date:
18 June 2022
UID
ibm16571315