News
Abstract
IBM® API Connect v10.0.1.4 is now available. This update includes important internal development and field reported fixes.
Content
IBM® API Connect v10.0.1.4 delivers enhanced capabilities for the market-leading IBM® API Management solution. To better enable v5 customers migrating from v5 to v10 who plan to select the v10.0.1.x long term support release, we have made a one time decision to backport many enhancements introduced in the v10.0.2 and 10.0.3 releases. This includes enhancements that reduce version differences between v5 and v10, first delivered in v10.0.3, which improves the product experience after migrating from v5 to v10.
For more information about API Connect v10.0.1.4, see API Connect IBM® Knowledge Center "What's New"
For new deployments: You can do a full installation that uses 10.0.1.4
When upgrading from API Connect v10.0.1.2 or greater: There are no special considerations required. Apply 10.0.1.4
When upgrading from API Connect v10.0.1.1 or earlier: Read the following section:
- Special note when API Connect v10.0.1.1 or earlier is deployed that uses Virtual Appliances (OVAs) on VMware: v10.0.1.4 includes virtual appliances with a newer version of the operating system that requires a version migration to new virtual appliances. This procedure must be completed to move your product data. If the deployment is on v10.0.1.2 or greater this method does not apply. If you are performing a fresh installation of v10, it is highly recommended you begin with v10.0.1.4 or v10.0.1.2-ifix2.
- Special note when API Connect v10.0.1.1 or earlier is deployed on OpenShift v4 or any other Kubernetes platforms: Due to changes in Kubernetes operator, you must first upgrade to 10.0.1.2-ifix2, and then apply v10.0.1.4 Find information on upgrading to v10.0.1.2-fix2
Read the following section for special updates regarding moving from API Connect v2018 to v10:
- Upgrading from API Connect v2018 to v10 can be accomplished using specific combinations of v2018.4.1.xx and v10.0.1.x.
- For deployments on Kubernetes: An in-place upgrade path is available. To move to v10.0.1.4, v2018 must first be at v2018.4.1.xx, and Kubernetes must be at a version supported by v10.0.1.4(see system requirements in IBM® Compatibility Reports.). See details here
- For deployments on VMware: A version migration path is available, where data is backed up from v2018 virtual appliances (OVAs) and data is restored into new v10.0.1.4 virtual appliances (OVAs) deployed separately. During the migration process, v2018 virtual appliances must be powered off. The gateways may remain powered on during the upgrade process of Manager, Portal, and Analytics subsystems. To move to v10.0.1.4, v2018 must first be at v2018.4.1.xx. See the IBM® Knowledge Center page for detailed instructions. More storage is required on v2018 OVAs during the upgrade process to perform the backup. See requirements here
- Find planning and overview materials related to moving from v2018 to v10 at API Connect: Upgrade Central
API Connect v10.0.1.4 contains all field APARs included in v10.0.3.0 as well as the following field reported APARs:
| APAR | Summary |
| LI82043 | ADVANCED PUBLISH CAUSES ADDITIONAL APPROVAL EMAILS FOR SUBSCRIPTIONS PENDING APPROVAL |
| LI82192 | V10 OVA BANS OWN IP ADDRESS |
| LI82210 | PORTAL REGISTRATION FAILS REPORTING MISMATCHED ENDPOINTS. |
| LI82221 | IMPORTING OAS3.0 JSON SLOW PERFORMANCE WHILE EDITING |
| LI82212 | PRODUCTS WITH VISIBILITY SET TO AUTHENTICATED AND STILL BE LOADED |
| LI82228 | POSSIBLE TO SEE THE TITLE OF OTHER USER'S APPLICATIONS IF KNOW THE NID |
| LI82267 | 2DCHA NOT ABLE TO SET BOTH PORTAL CLUSTERS TO PASSIVE |
| LI82101 | INTERMITTENT 503 ERROR WHEN TESTING APIS IN MANAGER UI |
| LI82217 | SPECIFIC PROPERTY NAME 'OWNER_URL' IS BLOCKING API FROM BEING PUBLISHED |
| LI81829 | ANALYTICS OVAS NOT STARTING UP WHEN MQ IS ENABLED |
| LI82275 | PORTAL SITES NOT ACCESSIBLE AFTER 2DCHA FAILOVER |
| LI82279 | GO update |
| LI82116 | APIC OPERATOR'S GATEWAYCLUSTER CONTROLLER SHOULD CONFIGURE A GATEWAY-PEERING INSTANCE FOR THE RATELIMIT-MODULE |
| LI82197 | PASSWORD RESET EMAIL NOT IN LANGUAGE THAT IS SET IN BROWSER |
| LI82229 | UNENFORCED API IS SENT TO GATEWAY IN A PRODUCT THAT CONTAINS AN ENFORCED API CAUSING SYNCHRONIZATION TO BREAK |
Downloads:
Full installation files for IBM® API Connect v10.0.1.4 can be downloaded with proper entitlement from Fix Central.
| Description – Filename | Date Published |
|
IBM® API Connect v10.0.1.4 Analytics for VMWare
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Local Test Environment
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Local Test Environment for Linux
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Local Test Environment for OSX
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Local Test Environment for Windows
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 for Containers
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Operator Release Files for Containers
|
6 August 2021 |
| IBM® API Connect v10.0.1.4 Operator Upgrade Release Files for Containers apiconnect-operator-upgrade-release-files_10.0.1.4.zip |
6 August 2021 |
|
IBM® API Connect v10.0.1.4 VMWare Install Assist for Linux®
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 VMWare Install Assist for Mac
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 VMWare Install Assist for Windows
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Management for VMWare
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Developer Portal for VMWare
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit for Linux®
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit Designer with Loopback for Linux®
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit Designer with Loopback for Mac
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit Designer with Loopback for Windows
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit with Loopback for Linux®
|
6 August 2021 |
| IBM® API Connect v10.0.1.4 Toolkit with Loopback for Mac | 6 August 2021 |
| IBM® API Connect v10.0.1.4 Toolkit with Loopback for Windows | 6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit for Mac
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Toolkit for Windows
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Analytics Upgrade File
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Management Server Upgrade File
|
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Portal Upgrade File
|
6 August 2021 |
| IBM® API Connect 10.0.1.4 script and assets required for v10->v10.0.1.2 side-by-side upgrades v10_ova_dr_files_10.0.1.4.tgz |
6 August 2021 |
| IBM® API Connect 10.0.1.4 scripts and assets required for v2018->v10.0.1.2 side-by-side upgrades v2018_ova_upgrade_files_10.0.1.4.tgz |
6 August 2021 |
|
IBM® API Connect v10.0.1.4 Security Signature Bundle File
|
6 August 2021
|
API Connect v10.0.1.4 Migration Utility
| Description – Filename | Date Published |
|
IBM® API Connect Migration Utility v10.0.1.4
|
Aug 10, 2021 |
[{"Line of Business":{"code":"LOB45","label":"Automation"},"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSMNED","label":"IBM API Connect"},"ARM Category":[{"code":"a8m50000000L0rvAAC","label":"API Connect"}],"ARM Case Number":"","Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"All Version(s)"}]
Was this topic helpful?
Document Information
Modified date:
31 May 2022
UID
ibm16471307