IBM Support

Starting QIJSSCD Manually Causes Printouts to Go to Wrong Printer

Troubleshooting


Problem

This document will explain why printouts can be routed to the wrong printer when starting the AJS monitor job manually .

Resolving The Problem

If the AJS monitor job, QIJSSCD, was ended and restarted manually for some reason using the ENDJS and STRJS commands, AJS printouts may start going to the wrong output queue.

To check the scheduled job that is creating the output, you should do the following:
1. On the operating system command line, type the following:

GO JS

Press the Enter key. Then, select Option 1 (Work With Jobs) and hit enter on the next screen.
2. Select Option 5 on the job and make a note of the 'Print device' parameter.  If this is *JOBCTL, continue with next steps.
3. Return to the JS main menu, and select Option 4 (Job Control).
4. Select Option 1 (Work with job defaults).  Select Option 5 next to *SYSTEM.
5. Locate the Print Device. If this attribute is *CURRENT, then the Print Device listed in the monitor job QIJSSCD is being used.

Resolution

To fix this problem, do the following:
1. On the operating system command line, type the following:

WRKACTJOB SBS(QSYSWRK)

Press the Enter key.
2. Type 2 on QIJSSCD, and make a note of the Print Device. Changing this to the correct Print Device resolves the problem.  At the next IPL, the normal Print Hierarchy path is re-established.

[{"Type":"MASTER","Line of Business":{"code":"LOB68","label":"Power HW"},"Business Unit":{"code":"BU070","label":"IBM Infrastructure"},"Product":{"code":"SWG60","label":"IBM i"},"ARM Category":[{"code":"a8m0z0000000CNEAA2","label":"Advanced Job Scheduler"}],"ARM Case Number":"","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"and future releases;7.3.0;7.4.0;7.5.0;7.6.0"}]

Historical Number

448253391

Document Information

Modified date:
21 July 2025

UID

nas8N1014413