PM84374: ABENDU4013 AND MSGFABH0322E ARE ISSUED WHEN HALDB OSAM BLOCK SIZE IS NOT THE SAME SIZE DEFINED IN RECON.

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• ABENDU4013 and MSGFABH0322E are issued when HALDB OSAM block
  size is not the same size as defined in RECON.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All users of IBM IMS High Performance Unload *
  *                 for z/OS Version 1 Release 2 (FMID=H1IN120). *
  ****************************************************************
  * PROBLEM DESCRIPTION: ABENDU4013 and MSGFABH0322E are issued  *
  *                      in the module FABH002                   *
  ****************************************************************
  * RECOMMENDATION: Apply the maintenance for this APAR.         *
  ****************************************************************
  ABENDU4013 and MSGFABH0322E (S-C DOES NOT MATCH) are issued in
  the module FABH002 when the actual BLKSIZE of a HALDB OSAM is
  not the same as that registered to the RECON.
  

Problem conclusion

• HP Unload has been modified to issue MSGFABH0607I and to
  continue processing when the actual BLKSIZE of a HALDB OSAM is
  not the same as that registered to the RECON.
  
  ========================
  = Documentation Change =
  ========================
  IBM IMS High Performance Unload for z/OS, V1R2, User's Guide
  (SC27-0936-07) should be changed as follows:
  ================================================================
  7.2 Messages and codes
  7.2.4 Messages
  7.2.4.1 FABH essages
  
   Two new messages are added.
  ----------------------------------------------------------------
  | FABH0607I DD=dd_name BLOCK SIZE IS NOT SIZE DEFINED IN RECON
  |
  | Explanation: The actual block size of the indicated OSAM
  | data set is not the same as that registered to the RECON.
  | System Action: The processing continues.
  | User Response: It is recommended that the block size is
  | corrected.
  ----------------------------------------------------------------
  | FABH0608E RANSIZE IS TOO LOW: MINIMUM IS nnn
  |
  | Explanation: The value of a RANSIZE control statement is lower
  | than the acceptable minimum value.
  | System Action: HSSR Engine ends abnormally.
  | User Response: Correct the control statement.
  ----------------------------------------------------------------
  ================= End of Documentation Change ==================
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UK92967

Modules/Macros

•    FABH512
  

Fix information

• Fixed component name

  IMS HIGHPERF UN

• Fixed component ID

  5655E0600

Applicable component levels

• R120 PSY UK92967

     UP13/03/29 P F303

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.