IBM Support

QRadar: M4 firmware 7.0.0 for xSeries 1U appliances (USB local installs)

Release Notes


Abstract

This firmware update (V7.0.0) provided by IBM is intended for xSeries firmware updates on your IBM® Security QRadar® M4 appliances. This update is intended for M4 1U form factor QRadar appliances (12xx, 13xx, 15xx, & 2100) where administrators want to update appliances using a bootable USB drive to complete an on-premise firmware update.

Content


Important: Select a tab to read each step of the firmware procedure.

 

Part 1: About the M4 firmware 7.0.0 update


Creating your USB flash drive for the firmware update requires a Windows™ host and the administrator must be on-site with the appliance. The firmware update can take up to 60 minutes complete per appliance and the administrator is required to reboot the appliance after the firmware install completes. The firmware upgrade procedures should only be done during a change window or during maintenance time for your QRadar appliances. If your Data Center does not allow USB keys, instructions and a download are available for administrators who have configured their Integrated Management Module (IMM2) interfaces. For information about other installation options, see: http://ibm.biz/qradarfirmware .


 

Supported appliances, types, and model information


This firmware update applies to the following IBM Security QRadar M4 (1U form factor) appliance types:
Hardware Details Size
Appliance QRadar 21xx (4380-Q1C)
QRadar Event Collector 1501 G2 (4380-Q2C)
QRadar QFlow Collector 1201 G2 (4380-Q2C)
QRadar QFlow Collector 1202 G2 (4380-Q3C)
QRadar QFlow Collector 1301 G2 (4380-Q4C)
QRadar QFlow Collector 1310 G2 (4380-Q5C)
QRadar QFlow Collector 1310 SR-C G2 (4380-Q5C)
QRadar QFlow Collector 1310 LR-C G2 (4380-Q6C)
1U
Server Type x3550 M4 1U
Server Machine Type 7914 1U
Machine type models (MTM) 4380-Q1C
4380-Q2C
4380-Q3C
4380-Q4C
4380-Q5C
4380-Q6C
1U
Table 1: List of appliances that the M4 appliance firmware v7.0.0 can update.

Important file changes and prerequisites in this firmware update


Administrators must ensure that their M4 appliance includes the minimum version outlined in the Prerequisite version column. If your M4 appliance does not meet the prerequisite versions outlined in the table, the administrator must contact IBM QRadar Support to discuss a custom upgrade path for your M4 appliance.
Component  Prerequisite version Firmware version  Name 
IMM2 4.31 or later 1aoo90b-7.40 ibm_fw_imm2_1aoo90b-7.40_anyos_noarch.uxz
UEFI/BIOS  None d7e172d-3.10 ibm_fw_uefi_d7e172d-3.10_anyos_32-64.uxz
DSA  None dsytd8g-9.54 ibm_fw_dsa_dsytd8g-9.54_anyos_32-64.uxz
Server RAID Controller H1110 None 1.20.02 ibm_fw_mpt2sas_h1110-1.20.02_linux_32-64.bin
Server RAID Controller M1115 None 20.13.1-0254 ibm_fw_sraidmr_1000-20.13.1-0254_linux_32-64.bin
HDD Update  None sas-1.23.02 ibm_fw_hddlenovo_sas-1.23.02_linux_32-64.bin
Table 2: Firmware updates for the M4 QRadar 1U form factor appliances are noted in this table.|


NOTICE
  • After the firmware is installed, the appliance must be restarted. Lenovo recommends that administrators restart appliances, instead of powering down the hardware to avoid a potential high voltage motherboard condition that can occur.
  • A number of hard disk drives can be installed in this appliance. The HDD update tool examines the hard disk drives that are present and selects the latest firmware version that is available for your drive.
  • The base system pack might contain other firmware packages that are not present in QRadar appliances. Firmware updates from the base system pack can be listed when the tool compares available firmware to the hardware in the appliance and display a status of "undetected".
  • For firmware questions and information see: http://ibm.biz/qradarfirmware.
 

Security issues resolved in this firmware update

The table below lists the software versions contained within the firmware package and the applicable CVEs addressed in this firmware release.

Component File name  CVEs resolved in this package
UEFI/BIOS ibm_fw_uefi_d7e172d-3.10_anyos_32-64.uxz
  • Updated code to address security vulnerability CVE-2019-0151.
  • Removed the IPSec driver due to non-use and security issues.
IMM2 ibm_fw_imm2_1aoo90b-7.40_anyos_noarch.uxz CVE-2019-11477, CVE-2019-11478, CVE-2019-11479
 
DSA  ibm_fw_dsa_dsytd8g-9.54_anyos_32-64.uxz None
Server RAID Controller H1110 ibm_fw_mpt2sas_h1110-1.20.02_linux_32-64.bin None
Server RAID Controller M1115 ibm_fw_sraidmr_1000-20.13.1-0254_linux_32-64.bin None
HDD Update  ibm_fw_hddlenovo_sas-1.23.02_linux_32-64 None
Emulex elx_fw_fc_15b-2.02x11-40_linux_32-64.bin None
Other Security Fixes None Additional firmware changes to address security vulnerabilities in open source packages, but for which there is no IMM2 exposure: CVE-2018-15473, CVE-2018-15919
 
Table 3: Security issues resolved in the M4 firmware update v7.0.0.
 


 

Part 2: Requirements to create a bootable USB drive


To create a bootable USB key, you must have access to the following items:
  • An 8 GB or larger USB flash drive.
  • Access to IBM Fix Central is required download firmware for QRadar appliances.
  • A workstation or laptop running one the following operating systems:
    • Windows™ 10
    • Windows™ 7
    • Windows™ Server 2008R2
    • Windows™ Server 20016
      NOTE: Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.
 

Creating the bootable USB drive

  1. Download the M4 v7.0.0 firmware IMG file from IBM Fix Central: http://www.ibm.com/support/fixcentral/swg/quickorder?parent=IBM%20Security&product=ibm/Other+software/IBM+Security+QRadar+SIEM&release=7.3.0&platform=All&function=fixId&fixids=7.3-QRADAR-FIRMWARE-M4_1U_USB-QRadar-QNI-PCAP-QIF-7.0.0&includeSupersedes=0&source=fc
  2. Download the  Rufus Bootable USB Tool.
  3. Insert the USB flash drive into a USB port on your Windows™ laptop or workstation.
  4. Open Rufus and configure the properties.
    Parameter Value
    Device Select your USB drive
    Boot Selection Select Qradar_IMG_M4_1U_MT7914_x3550_7_0_0.img
    Partition scheme MBR (Default)
    Target system BIOS (or UEFI-CSM) (Default)
    File system FAT32 (Default)
    Cluster size
    This value defaults to the best option based on size of the USB drive.
     image 4486
  5. Click Start. The image is loaded on the USB drive.
    image-20191101124104-2
  6. After the installation finishes, safely eject the USB flash drive from your computer.

    Results
    The bootable drive is ready to be used to install firmware on the M4 appliance.
 

 

Part 3. Installing the Firmware on the QRadar M4 appliance


The instructions below are intended for M4 appliances that are not configured as HA (high-availability) pairs. If your appliance is in a HA pair, you must use the High-Availability update instructions found here:  http://www.ibm.com/support/docview.wss?uid=swg27047121#HA .

Booting from the USB Drive

  1. Insert the USB drive that has the bootable image into the QRadar appliance.
    IMPORTANT: Do not remove the USB flash drive until the IBM ToolsCenter completes the firmware installation.
     
  2. From the terminal of the KVM switch for the appliance, log in by using the root credentials.
     
  3. From the command prompt, type: reboot.

     
  4. As the appliance is rebooting, press the F12 key.
     
  5. Select the bootable firmware image, for example, USB Storage and Press Enter.

     
  6. When prompted, select Updates.

     
  7. Verify that the bootable media shows the correct machine type for the appliance.
    Hardware Details
    Server Type x3550 M4 BD
    Server Machine Type 7914

  8. To start the update, select Click here to start update.
    NOTE: Verify that the Updates list contains x3550 M4 BD -- machine type 7914 in the updates list.

     
  9. Select your language and click I accept the terms in the license agreement to continue.
    image-20190110163313-1
     
  10. The IBM UpdateXpress System Pack Installer compares the current package with the installed firmware.
    image-20190114120946-1
     
  11. **IMPORTANT**. Verify that all Suggested or Critical check boxes are selected. Administrators can use the first check box to select all options and the installer skips any updates that are 'Not Required'.
    image-20190114120649-1

     
  12. To start applying the updates, click Next on the Update Options page.
    The bootable media creator starts to install firmware on the M4 appliance.
     
  13. Verify that all the firmware updates are applied, and click Next to complete the update.
    image-20190114120659-2
     
  14. After the update is complete, click Save Log to save the installation log to the USB flash drive. This file can be provided to support in case any issues occurred during the update.
    image-20190114121404-1
     
  15. Select a drive to save the logs and click OK.

     
  16. When all updates are complete, click Finish to reboot the appliance.

    Results
    After the firmware is installed, the appliance must be restarted. Lenovo recommends that administrators restart appliances, instead of powering down the hardware to avoid a potential high voltage motherboard condition that can occur. If you experience any installation issues, you can contact QRadar Support for assistance and open a software support case for your appliance. The support representative might request the firmware logs for review to determine the root cause of the issue or if replacement hardware is required. If the issue is hardware related, the support representative can change the case type and involve the proper teams to schedule replacement parts.  
 

[{"Business Unit":{"code":"BU008","label":"Security"},"Product":{"code":"SSBQAC","label":"IBM Security QRadar SIEM"},"ARM Category":[{"code":"a8m0z000000blfyAAA","label":"QRadar->Hardware->Firmware Upgrades"}],"ARM Case Number":"","Platform":[{"code":"PF016","label":"Linux"}],"Version":"7.3.0;7.3.1;7.3.2;7.3.3;7.4.0","Line of Business":{"code":"LOB24","label":"Security Software"}}]

Document Information

Modified date:
29 June 2020

UID

ibm16238150