IBM Support

Readme and Release notes for release 4.2.3.2 IBM Spectrum Scale 4.2.3.2 Spectrum_Scale_Protocols_Data_Management-4.2.3.2-ppc64LE-Linux Readme

Fix Readme


Abstract

xxx

Content

Readme file for: Spectrum Scale
Product/Component Release: 4.2.3.2
Update Name: Spectrum_Scale_Protocols_Data_Management-4.2.3.2-ppc64LE-Linux
Fix ID: Spectrum_Scale_Protocols_Data_Management-4.2.3.2-ppc64LE-Linux
Publication Date: 21 June 2017
Last modified date: 21 June 2017

Installation information

Download location

Below is a list of components, platforms, and file names that apply to this Readme file.

Fix Download for Linux

Product/Component Name: Platform: Fix:
IBM Spectrum Scale Linux PPC64LE RHEL
Linux PPC64LE SLES
Spectrum_Scale_Protocols_Data_Management-4.2.3.2-ppc64LE-Linux

Prerequisites and co-requisites

  • - Prerequisites

    If you are coming from 4.1.1-X, you must first upgrade to 4.2.0-0. You may use this 4.2.3-2 package to perform a First Time Install or to upgrade from an existing 4.2.0-X/4.2.1-X/4.2.2-X/4.2.3-X level.

    Please see the FAQ for any additional restrictions on upgrades.

Installation information

  • - Installing IBM Spectrum Scale for Linux on Power8 LE Systems

    1. Choose the download option "Download using Download Director" to download the new Spectrum Scale package and place it in any location desired on the install node. Note, if you must (not recommended) use download option "Download using your browser (HTTPS)", instead of clicking on the down arrow to the left of the package name, you must right-click on the package name and select the Save Link As.. option. If you just click on the download arrow, the browser will likely hang.
    2. Follow the installation or upgrade instructions in your IBM Spectrum Scale Concepts, Planning and Installation Guide.


Additional information

  • - Package information

    The images listed below and contained in the Self Extracting Package are packages for IBM Spectrum Scale. The images are standard RPM images that can be directly applied to your system.

    Before installing IBM Spectrum Scale, it is necessary to verify that you have the correct levels of the prerequisite software installed on each node in the cluster. If the correct level of prerequisite software is not installed, see the appropriate installation manual before proceeding with your IBM Spectrum Scale installation.

    For the most up-to-date list of prerequisite software, see the following pages in the IBM Knowledge Center: GPFS, Protocols/Install-Toolkit.

    Install Version:

    4.2.3.2


    SE-Package contents:

    To view the full list of packages for Standard Edition:

    ./Spectrum_Scale_Protocols_Standard-4.2.3.2-ppc64LE-Linux-install --manifest


    To view the full list of packages for Advanced Edition:

    ./Spectrum_Scale_Protocols_Advanced-4.2.3.2-ppc64LE-Linux-install --manifest


    To view the full list of packages for Data Management Edition:

    ./Spectrum_Scale_Protocols_Data_Management-4.2.3.2-ppc64LE-Linux-install --manifest


  • - Summary of changes for IBM Spectrum Scale

    Unless specifically noted otherwise, this history of problems fixed for IBM Spectrum Scale 4.2.x applies for all supported platforms.

    Problems fixed in IBM Spectrum Scale 4.2.3.2 [June 21, 2017]

    • Address a problem where AFM recovery stalls on a read of an IW fileset when it waits to fetch the file from home after the recovery completes.
    • Improve a conditional ccr update for CES IPs list file.
    • Fix a problem that causes RenameHandler long waiter. This can occur if PIT is in progress.
    • Fix a Ganesha crash that can occur when the user enters a string which contains a colon in any mmnfs command that requires a client option or client list string.
    • Fix an assert that can occur when changing gateway nodes to non gateway nodes while operations are being performed on an iw fileset and then the non gateway nodes are turned back into gateway nodes.
    • Fix a rare deadlock that can occur between a thread handling mmap and a thread handling a memory map pagefault.
    • Fix an E_STALE failure that can occur when during a DMAPI dm_read_invis.
    • Fix long waiters that can occur on a very busy system doing background snapshot deletion.
    • Fix a case where GPFS skipped shrinking lastdata block which causes excess space to be consumed.
    • Improve the mmsetquota error message that occurs when a block limit is specified in 'T' unit and larger than 909T is specified.
    • Fix an assert that can occur when mmcheckquota and mmrepquota are passed fileset ids from deleted filesets.
    • Fix an issue in the AFM environment where afmHardMemThreshold configuration value is not honored and more memory is used than specified.
    • Increase the wait time for commands to execute, before failing.
    • Correct formatting of large call counts reported by "mmfsadm vfsstats".
    • Fix long waiters that can occur after a file system panic and a very busy system.
    • Fix a problem in which inodes become Busy after unmount with NFS and immutable files.
    • mmkeyserv: Make it possible to set certain attributes to the default with the use of "delete" or "default" keyword.
    • Fix a problem in which mkdir, creates, and resync can fail during revalidation from cache/primary to home/secondary in newer kernels 3.18 or later.
    • Fix a problem in which GPFS can not handle errors that occur when a DM application was unable to retrieve data due to offline tape.
    • Suppress repeated message "Expanded ... inode space N from X to Y inodes" in mmfs.log.
    • Fix a rare quota management deadlock caused by error conditions such as out of disk space.
    • Fix an issue in AFM+HSM environment where resync/failover/changeSecondary commands fails to replicate migrated files.
    • Fix an issue in the AFM environment where a fileset force unlink could cause the daemon to crash.
    • Address a problem where a gateway node can assert/crash when having more than 1024 active fileset operations occurring across different filesets on a single gateway node.
    • Fix a problem in which gpfs.snap may not gather mmfs logs on AIX nodes correctly.
    • Fix a clone parent file deletion performance issue.
    • Fix a problem in which fsetxattr failed with ENOENT using a fd of an unlinked file.
    • Fix the Assert exp(fileLockHeld != LkObj::nl) in fetchBufferM() that can occur when compression is being used.
    • Fix a problem where DMAPI invis read/write fails with an err 22 when calling from non session node.
    • Fix a problem in which the mmnetverify command does not correctly verify remote addresses when running many tests in parallel.
    • Fix a deadlock that is very rare and can occur after running snapshot commands.
    • Fix a policy problem which causes the LOWDISKSPACE callback to not trigger after a fs manager takeover when the old fs manager fails because of an abort or a lost connection.
    • This update addresses the following APARs: IV96355 IV96416 IV96417 IV96418 IV96419 IV96420 IV96425 IV96426 IV96429 IV96472 IV96473 IV96474 IV96476 IV96482 IV96483 IV96487 IV96488 IV96585 IV96761 IV96762 IV96763 IV96764 IV96783 IV96786 IV96791.

    Problems fixed in GPFS 4.2.3.1 [May 16, 2017]

    • Fix a Ganesha crash caused by an applyUpdate.
    • Fix a ccrio initialization failure (err 811) when changing the daemon-interface.
    • Fix a rare segmentation fault in the mmgetstatus command.
    • Fix a SIGBUS error that can occur during a mmap read on a snapshot file.
    • Fix a problem in which we see a flood of "failed to scrub vdisk" log message when GNR node experiences quorum loss. This is for ESS/GSS.
    • Fix a rare race between unlink, lookup and token revoke which causes kernel crash in d_revalidate.
    • This fix will make sure Ganesha request reference a valid GPFS filesystem.
    • Fix a system hang that can occur when a file system is suspended while doing a mmap.
    • This fix rejects unreasonable large requests to preallocate inodes immediately with ENOSPC.
    • Fix a directory rename issue with IW filesets that can occur if the rename target is an existing directory.
    • Fix a fault that can occur when restripe runs while the SG is not mounted on all NSD nodes.
    • This fix restricts the afmMaxParallelRecoveries config value from 0 to 128.
    • This fix removes the unnecessary error message "cannot open /proc/net/tcp6" when shutting down GPFS.
    • Fix a problem with not properly handling quotas in an AFM environment. This can occur when you have very large hard and soft limit values.
    • Fix a "exp(!sgP->isSGMgr())" assert that can occur when you delete a file system and then create a new file system with the same name at the same time.
    • Fix an err 112 that can show up in the mmfs logs when mmchnode --gateway is executed.
    • Fix a kernel crash that can occur while attempting to mount a loop device to a correspond file in a GPFS file system or while using a GPFS file system file as a LIO backend.
    • Address a problem where applyUpdates continues to run even if the fileset at the old primary is unlinked or the mmfs daemon has been shutdown.
    • Fix an outband resync failure that can occur if a recovery is triggered by deleting some files in a directory and the directory itself. This is an AFM/DR environment.
    • Fix rename conflicts that can occur in SW/DR filesets.
    • Update log code to prevent log recovery error when log file became illReplicated. This could happen on file system with -K set to NO and there is not enough disk space for full replication.
    • This fix will use new interface that will reduce multiple retries every time a lock is freed and there are multiple waiters for the lock.
    • Fix an assert that can occur with a DR fileset and the file system is suspended.
    • Fix bug that requires a large free space in /var/mmfs to run change commands.
    • Fix recovery failure err 17 when psnap0 deletion fails.
    • Fix a daemon assert that can occur in an AFM environment where the mmfsd daemon fails to start repeatedly with a DMAPI enabled filesystem at a gateway node.
    • Address a problem where trying to queue a writeSplit message to the helper gateway's queue can fail with an error 28 (E_NOSPAC).
    • Fix an issue which returns EACCESS(errno = 13) while running mmapplypolicy when there is a mounted NFS file system which has the same name with a GPFS file system.
    • A fastpath optimization defect can result in an internal error to be returned to the user when it is safe to continue without entering the fast path.
    • Install if you suffer from mmapplypolicy/tspolicy hanging after otherwise finishing all work.
    • cNFS: fix a problem with /usr/sbin/rpcinfo not found in SLES12 or later.
    • Fix a failure in Object Authentication configuration with Active Directory or LDAP. This fix is only required if Object is being configured with Active Directory or LDAP and DN of Swift service user(specified in --ks-swift-user) is more than 79 characters.
    • Fix a problem with ESS disk replacement in which the mmchcarrier command may wipe out the pdisk location code. The problem will prevent the subsequent mmchcarrier command to proceed without a valid location code.
    • Fix a problem in which a GPFS command may wrongly terminate another process.
    • Fix a rare deadlock problem caused by stream write(enableRepWriteStream=yes).
    • Update log recovery code to avoid GPFS daemon assert after detecting invalid directory block during log recovery. Code has been changed to log a FSSTRUCT error and fail the log recovery so offline mmfsck can be run on the file system.
    • Fix a mmfsd crashes (incompleteOk assertion), when the number of files in the committed directory doesn't match the number of files in CCR's file list in case of a new CCR file update request.
    • This update addresses the following APARs: IV94991 IV94992 IV94994 IV94995 IV94996 IV94997 IV94998 IV95015 IV95021 IV95230 IV95557 IV95643 IV95925 IV96037 IV96163.
  • - Summary of changes for IBM Spectrum Scale Protocols

    Unless specifically noted otherwise, this history of problems fixed for IBM Spectrum Scale 4.2.3 applies for all supported platforms.

    Problems fixed in Spectrum Scale Protocols Packages 4.2.3-2 [Jun 16, 2017]

    • ganesha: Delay SVC shutdown call while stopping ganesha service
    • ganesha: libntirpc pullup: Release lock after netconfig buffer is duplicated
    • ganesha: libntirpc pullup: XDR and netbuf: fix decoder overruns from guidovranken
    • ganesha: Fix nlm state refcount going up from zero
    • ganesha: Use option grace_period to determine grace timeout
    • ganesha: remove short_file_handle option in GPFS FSAL
    • ganesha: Disable NLM SHARE requests
    • ganesha: Fix name of python-ganesha dependency package
    • ganesha: Fix infinite loop in cache_inode_unexport for STALE entry
    • gui: ESS510; Default inode blocksize should not be 512K
    • gui: If no hard limit is specified for a fileset quota a NPE appears on the "Capacity" page
    • gui: lsinventory doesn't return expected data
    • gui: Login not possible when LDAP enabled
    • gui: ESS510; LE: pools = 0 under filesystem tab
    • gui: NPE when clicking "Create Filesystem"
    • gui: GUI Missing Disk state for "emptied"
    • gui: ESS GUI Hardware page does not display enclosures in case mmdiscovercomp failed to discover storage servers
    • install-toolkit: Bug fixes
    • smb: wbinfo -t and wbinfo -a lockups; Fix regression for tight loop waiting for revoke to complete
    • smb: smbd INTERNAL ERROR Signal 11 PANIC; Do an early exit on negprot failure.
    • swiftonfile: Fixed setup.py to ignore owner/group/mode for object-server-sof.conf and bumped from 2.7.2_0-1 to 2.7.2_0-2
    • This update addresses the following APARs: IV97172

    Problems fixed in Spectrum Scale Protocols Packages 4.2.3-1 [May 17, 2017]

    • ganesha: Fix a deadlock between reaper thread and setclientid
    • gui: Support for a new 24 slot enclosure
    • gui: memory leak - mmchcom* commands are extremely slow
    • gui: Enclosures discovery is affected by mmlscomp coming back with unexpected rc=2
    • gui: Node panel is empty, not showing any of 783 nodes
    • gui: ESS510LE: Discovered scale cluster hangs
    • gui: GUI does not know enclosure FW or part info (and unknown server/enclosure state)
    • gui: GUI does not remove port 443 port forwarding rules after stop/uninstall
    • gui: GUI reflecting a red error state for event name: gui_config_sudoers_error on Ubuntu
    • gui: The System Setup wizard takes long time to complete because it discovers the HBA firmware without need
    • gui: Charts may display "Error loading chart" eventhough there is no issue with ZIMon
    • gui: Performance chart preset not found error - Fix the 3x3 dashboard
    • gui: The image of the OneStor enclosure displayed in the GUI rack view is too dark
    • gui: REST API: XMLHttpRequest failure
    • gui: VendorResourceHandler can crash with certain browser locales
    • gui: Server preview not displayed in Hardware page
    • gui: EMS server not seen in the "Hardware" view of GUI
    • gui: TCT Nodes and File systems grids are broken
    • gui: Filesets inodes values display negative values
    • gui: Filesets page hangs on F5 refresh
    • install-toolkit: added auth prerequisite precheck
    • install-toolkit: restrict config populate on 4.2.3+
    • install-toolkit: improved warning messages in deploy precheck
    • smb: Fix ADS down winbind not available.
    • smb: Rebase to Samba 4.5.8
    • smb: Update SELinux policy module for polkit.
    • smb: Samba crashes found in log. Protect against bogus records in dbwrap.
    • smb: busy looping trying to revoke readonly delegations. Avoid a tight loop waiting for revoke to complete.
    • smb: CTDB hot record tracking does not detect bouncing between. Reimplement hot record detection using migrations per second
    • smb: Samba bugzilla 12733: ctdb docs: ctdb -n option does only take numeric values
    • zimon: Fixed a bug that causes a remote peer to hang if a query request includes a filter expression.

    Problems fixed in Spectrum Scale Protocols Packages 4.2.3-0 [Apr 07, 2017]

    • Please see the "What's New" page in the IBM Knowledge Center

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"STXKQY","label":"IBM Spectrum Scale"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}}]

Document Information

Modified date:
21 June 2017

UID

isg400003377