Download
Abstract
IBM Rational Team Concert 5.0.2_iFix012 has been made generally available and contains fixes to version 5.0.2 including all predecessor fixes.
Download Description
| Sections | Description | |
|---|---|---|
The Change history section provides an overview on what is new in this interim fix with a description of any new functions or enhancements when applicable. |
||
The How critical is this fix section provides information related to the impact of this interim fix to allow you to assess how your environment may be affected. |
||
The Prerequisites section provides important information to review prior to the installation of this interim fix. |
||
The Download package section provides the direct link to obtain the download package for installation in your environment. |
||
The Installation instructions section provides the installation instructions necessary to apply this interim fix into your environment. |
||
Click to review a complete list of the defects (APARs) resolved in this interim fix. |
||
The Known side effects section contains a link to the known problems (open defects) identified at the time of this interim fix. |
||
| Document | Description |
|---|---|
Click to review the detailed system requirements information for a complete list of hardware requirements, supported operating systems, prerequisites and optional supported software, with component-level details and operating system restrictions. |
|
IBM Knowledge Center provides an entry point to product documentation. You can view, browse, and search online information related to the product. |
|
The Jazz initiative consists of three elements: Platform, Products and Community. Explore the jazz.net product page. |
|
Find technical developer content and resources. |
Prerequisites
IBM Rational Team Concert 5.0.2 must be installed to apply this iFix. Note: Before you install the server patch file, verify that no other test fixes are installed. If other fixes are installed, contact IBM Software Support. |
Installation Instructions
Click the corresponding tab below to review the installation instructions to apply the iFix on a server or client host:
Tab navigation
Note: Before you install this server patch file, verify that no other test fixes or hot fixes are installed. If other fixes are installed, contact IBM Software Support.
For a CLM deployment on a single server, complete the following steps once.
For a distributed CLM deployment, complete the same steps on each server.
Procedure to install the server patch:
- Stop the CLM server.
- Verify whether the following directory exists:
<server_installation_directory>/server/patch. - If the directory exists, back up and remove its contents.
- If the directory does not exist, create it.
- Copy the server patch file into the
/server/patchdirectory. - Start the server.
- Run "repotools-<app> -clean" for each application that is installed.
Note: For a distributed CLM deployment, complete the same steps on each server.
Also, the "-clean" parameter is the OSGI framework command which runs repotools with the default argument "help".
The output is captured in the reptools-<app>_help.log which resides in the <JazzInstallDir>/server/ directory where reptools-<app>.bat resides.
Procedure to uninstall the server patch:
- Stop the CLM server.
- Back up and remove the contents of the following directory:
<server_installation_directory>/server/patch - Start the CLM server.
- Run "repotools-<app> -clean" for each application that is installed.
Note: For a distributed CLM deployment, complete the same steps on each server.
Procedure to install the client update site:
- Extract the update site file to the computer where the client is installed.
- In the Rational Team Concert client, click Help > Install New Software.
- In the Install window, click Add.
- In the Add Repository window, click Local and navigate to the extracted update site file.
Note: The update site root directory contains a site.xml file. - Select the patches to install.
- If you agree to the terms, accept the license agreement and click Install.
- After the installation is complete, restart the Rational Team Concert client.
Note: To update the feature patch, you can install the new version directly over the old patch. You do not have to uninstall the old patch.
Procedure to uninstall the client update site:
- In the Rational Team Concert client, click Help > About Rational Team Concert > Installation Details.
- Select the patches to uninstall and click Uninstall.
- After the uninstall process is complete, restart the Rational Team Concert client.
WARNING:
There are two update sites provided as part of the iFix and which one is deployed depends on the installed version of RTC that is currently in use. Refer to the file list above to determine which update site to use. The update site for the 5.0.2 GA full client installation will not work with Eclipse 3.6 based Rational Team Concert client installed using the IBM Installation Manager. Alternatives are to use the Eclipse 3.6 based Rational Team Concert client zip install, or use IBM Installation Manager to install the Eclipse 4.2 based Rational Team Concert client. The iFix008 update site is specifically for those users who have installed the RTC iFix008 client from Install Manager. That update site will not work on the GA clients.
If you run the uninstall process on a Rational Team Concert client that was installed by using a .zip file, the feature patch will be removed along with the original feature. Removing the patch will break the functionality of the affected feature.
For a client that was installed by using a .zip file, reinstall the features by downloading the Rational Team Concert p2 repository from Jazz.net, and use the same installation steps with the following exception:
- For step 4, click Archive and select the p2 repository .zip file and install the Rational Team Concert feature. This step will remove the patched plug-ins and replace the missing features with the original versions of the feature from the p2 repository.
If you run the uninstall process on a Rational Team Concert client that was installed by using the p2 repository, to remove the patch, you must uninstall the entire Rational Team Concert p2 feature and then reinstall the entire Rational Team Concert feature through the p2 repository.
Procedure to install the Visual Studio client update:
- Close all the running Visual Studio client(s).
- Extract the patch zip file to the computer where the RTC Visual Studio client is installed.
- In the IBM Installation Manger, click File > Preferences > Repositories > Add Repository and provide the path to the folder extracted in the second step.
- Click Ok to close Preferences window.
- Make sure that the check box File > Preferences > Files for Rollback > "Save files for rollback" is checked.
- Now click on Update in the Installation Manager.
- Select IBM Rational Team Concert Client for Microsoft Visual Studio IDE package group and click Next.
- Select the RTC version that needs to be updated and click Next.
- If you agree to the terms, accept the license agreement and click Install.
- Select the Visual Studio version(s) and click Next.
- Click on Update
- Click Finish to complete update.
- After the installation is complete, start the Rational Team Concert Visual Studio client.
To update the feature patch, you can install the new version directly over the old patch if the Visual Studio IDE version is 2010 or 2012. You do not have to uninstall the old patch.
Procedure to roll back to the previous client version:
- Close all the running Visual Studio client(s).
- In the IBM Installation Manager, click Roll Back.
- Select the IBM Rational Team Concert Client for Microsoft Visual Studio IDE package group and click Next.
- Select the patch to roll back to.
- Click on Roll Back.
- Click Finish.
WARNING:
The 5.0.2 patch can be installed only on top of 5.0.2 GA release.
To remove a patch, only Roll Back should be used in the Installation Manager.
Uninstalling the patch will completely remove the GA release along with the patch(s) installed on top of it.
Procedure to install the Data Collection Component patch:
- Stop the DCC server.
- Verify whether the following directory exists: <server_installation_directory>/server/patch.
- If the directory exists, back up and remove its contents.
- If the directory does not exist, create it.
- Copy the server patch file into the /server/patch directory.
- Start the DCC server.
Procedure to uninstall the Data Collection Component patch:
- Stop the DCC server.
- Back up and remove the contents of the following directory: <server_installation_directory>/server/patch
- Start the DCC server.
Procedure to install the patch with JRS deployed on Apache Tomcat server:
- Stop the JRS Tomcat server
- Copy the following file to a backup directory in the event you need to revert the patch:
- <JRS_Install>\server\tomcat\webapps\rs.war
- Delete the following file:
- <JRS_Install>\server\tomcat\webapps\rs.war
- Delete the following directories:
- <JRS_Install>\server\tomcat\webapps\rs
- <JRS_Install>\server\tomcat\work\Catalina\localhost\rs
- Place the new rs.war file under <JRS_Install>\server\tomcat\webapps
- Start the server
Procedure to uninstall the patch with JRS deployed on Apache Tomcat server:
- Stop the JRS Tomcat server
- Restore the original rs.war that was backed up in step 2 of the install instructions to the following directory
- <JRS_Install>\server\tomcat\webapps\
- Delete the following directories:
- <JRS_Install>\server\tomcat\webapps\rs
- <JRS_Install>\server\tomcat\work\Catalina\localhost\rs
- Start the server
Procedure to install the patch with JRS deployed on WebSphere Application Server:
- Unzip the reporting-war zip file somewhere either on your local machine or on the JRS server.
- In the WAS Admin Console, stop the JRS application: Go to Applications > Application Types > Websphere enterprise applications, select the checkbox next to rs_war and click on Stop.
- Update the rs_war file: Select the checkbox next to rs_war and click on Update.
- Select "Replace the entire application", then browse to the new rs.war file from the unzipped directory and click on Next. Browse locally if the file was saved on the local machine in step 1, or do a remote browse if the file was saved on the JRS server. Follow the Fast Path installation, and accept all of the defaults.
- Save the configuration changes when prompted after the update completes.
- Start the JRS application: select the checkbox next to rs_war and click on Start.
Procedure to uninstall the patch with JRS deployed on WebSphere Application Server:
- Locate the rs.war file in the original JRS installation.
- In the WAS Admin Console, stop the JRS application: Go to Applications > Application Types > Websphere enterprise applications, select the checkbox next to rs_war and click on Stop.
- Update the rs_war file: Select the checkbox next to rs_war and click on Update.
- Select "Replace the entire application", then browse to the rs.war file in the original JRS installation and click on Next. Browse locally if the file was saved on the local machine in step 1, or do a remote browse if the file was saved on the JRS server. Follow the Fast Path installation, and accept all of the defaults.
- Save the configuration changes when prompted after the update completes.
- Start the JRS application: select the checkbox next to rs_war and click on Start.
Download Package
The following sections provide detailed information related to this interim fix.
Click the FC link below to obtain the interim fix from Fix Central.
How critical is this fix?
| Impact | Description |
|---|---|
Corrective |
This is a maintenance interim fix. It contains fixes for client-reported and internally found defects. |
There are no known regressions to report. | |
| In addition to the fixes listed in this document, the iFix may also contain fixes for security issues.
For more details, please refer to the IBM Product Security Incident Response (PSIRT) Blog. |
Problems Solved
This server patch contains fixes for the following defects: |
| APAR (WorkItem URL) | Description |
| Rational Data Collection Component | |
| PI28909 | [Backport 5.0.2] Dashboard report is showing the last time the Java ETLs were run not when the last DCC ETLs were run. |
| PI29074 | [Backport 5.0.2] CQPAR00108139: Job status shows failure for all resource groups even though only one of them actually failed. |
| PI30420 | [Backport 5.0.2] [DCC] Records marked as softdeleted in TIMESHEET could be active again - DCC. |
| PI39043 | [Backport 5.0.2] DCC - Timesheet ETL issues. |
| PI40747 | [Backport 5.0.2] DCC open file descriptor Leaks behavior. |
| PI40912 | [Backport 5.0.2] DCC: ODS Collector jobs are in waiting state forever if there was a temporary DB connection problem. |
| PI42419 | [Backport 5.0.2] CQPAR00140514: DCC Quality Management job failing. |
| PI43701 | [Backport 5.0.2] CQPAR00143712: DCC handling of Oracle BINARY_DOUBE is wrong. |
| PI45649 | [Backport 5.0.2] DCC Web UI corrupts the delta time when web browser language is e.g., french. |
| PI46442 | [Backport 5.0.2] [363201] DCC should log SQLException when failing to prepare statement. |
| PI52655 | [Backport 5.0.2] 375622: CQPAR00163680: Delete Fact Table Data DCC job took long time but could not finish. |
| PI48537 | [Backport 5.0.2] 360532: Ghost links appearing in traceability report. |
| Jazz Reporting Service | |
| PI31540 | [Backport 5.0.2] JRS data source issues when using LDAP and custom DW extension names that end with “.‿. |
| PI33336 | [Backport 5.0.2] CQPAR00118878: Custom Enumerations in certain case display as literal ID instead of name. |
| PI33321 | [Backport 5.0.2] CQPAR00118829: JRS Not able to Handle RQM Categories like Attributes. |
| PI28909 | [Backport 5.0.2] Missing custom link types for requirements. |
| PI36076 | [Backport 5.0.2] Issues with RM custom attributes. |
| PI28909 | [Backport 5.0.2] Able to download query spreadsheet non-authenticated/authorized, potential for malicious use and phishing attack. |
| PI28909 | [Backport 5.0.2] JRS using the data warehouse is showing no results in non CM-enabled project traceability reports from requirements. |
| PI36678 | [Backport 5.0.2] DW data source SQL queries do not handle a schema prefix. |
| PI37951 | [Backport 5.0.2] Report Builder lists Soft Deleted project areas when selecting Scope. |
| PI28909 | [Backport 5.0.2] JRS Failing to Input Validate and output encode data, leading to potential XSS (Cross Site Scripting) Vulnerability. |
| PI38981 | [Backport 5.0.2] Project List Excludes Project Areas that do not have team areas. |
| PI41444 | [Backport 5.0.2] Metamodel initialization should happen on server startup. |
| PI44060 | [Backport 5.0.2] CQPAR00143896: Statement that checks if connection is valid can cause problems. |
| PI41440 | [Backport 5.0.2] CQPAR00139305: JRS - Set Conditions - No values to select for Filed Against Attribute. |
| PI41944 | [Backport 5.0.2] Version check fails for Oracle 12c data warehouse. |
| PI28909 | [Backport 5.0.2] JRS server rename fails with multiple mapping events or if server is restarted during rename process. |
| PI44469 | [Backport 5.0.2] IE9 Report name, title and visibility all disabled. |
| PI43835 | [Backport 5.0.2] Help > Help contents link in the Report Builder UI should point to the information for the respective version. |
| PI52228 | [Backport 5.0.2] The unparser should handle the INTERSECT clause. |
| Rational Jazz Foundation | |
| PI43630 | Workaround: Action is required for a remote floating license server after an upgrade to version 5.0.2. |
| PI28526 | NPE in ManagedFloatingLicenseClient$LeaseCache.getCheckoutOperations. |
| PI28909 | Backport defect 342550 to 5.0.2 Maintenance Staging to correct the JVM threads names once they are reused from the Thread pool. |
| PI28909 | Adding new roles in Web UI makes it VERY easy to seriously corrupt roles database - Chrome only. |
| PI28909 | Diagnostics Oracle JDBC Driver version check does not accept 12.1.0.2. |
| PI28909 | Error during creation of Life Cycle Project in CLM 5.0.2RC1 with JazzProjectAdmins permission. |
| PI28909 | Investigate implications of two components having the same ID. |
| PI28909 | Issue #1 Maintenance 5.0.2 - PMC 341917. |
| PI28909 | Issue #3 Maintenance 5.0.2 - PMC 341970. |
| PI29645 | Don't cause an SQLException to determine if a MARKER exists (5.0.2iFix007). |
| PI30407 | RTC ETL's should be able to handle date values where the year is not 4 digits long. |
| PI30488 | DelegatedAuthHandler and LoginPageStatusHandler ignores com.ibm.team.jfs.app.oauth.OAuthHelper.disableSecureCookies property. |
| PI31126 | The iteration type should not be restored if it's not archived. |
| PI31655 | The LPA templates can not be retrieved after a migration from 5.0.1 (with a server rename) to 5.0.2. |
| PI31729 | 5.x Indexer for Excel can run out of memory. |
| PI33689 | All Project Areas are deleted during upgrade to RDNG 5.0.2 if finalizeApplicationMigration is rerun following a failure. |
| PI34460 | Adopt Report caching slow on Oracle (344963). |
| PI36337 | Project Dashboard shows incorrect content after loading a WI or Query Result and then performing a browser refresh in IE. |
| PI36961 | Full Text Search stemming doesn't work correctly in non-English European languages (Backport 345158 to 5.0.2 ). |
| PI37026 | Online Migration can skip states in the event of a retry-able DB exception (fix in 5.0.2). |
| PI37053 | Creating iterations can break if translation is wrong (Fix in 5.0.2). |
| PI37117 | Handle the query cancellation in query iterator and QueryFilter (resource context filter). |
| PI37378 | VVC cache storage to concept misses causes bad performance. |
| PI37679 | Query Results from performQuery can be unexpectedly cached (Backport 348143 to 502ifix ). |
| PI37709 | Online migration can skip states on subsequent runs. |
| PI38110 | Deleting resource in no-history storage area should not update history index to 502 (Backport 351405 to 502). |
| PI40009 | Lucene crashes because of Mmap issue (Backport to 502). |
| PI40126 | TeamAreaRole ETL flips two columns (354920). |
| PI40589 | [RTC 5.0.2] [wi 356278] - ETL should ignore Item not found exceptions. |
| PI41256 | RRC Project Baselines are inaccessible after migration from 4.0.x in a server renamed environment. |
| PI42477 | Text query service doesn't work after server rename. |
| PI43630 | IACS should support Functional outbound to local targets - backport (334135) to 502. |
| PI47081 | Production Data Warehouse shows duplicate work item records [Defect 356581]. |
| PI49462 | Timelines widget does not display team area timeline assignments. |
| PI52896 | Login to fronting apps (other than RTC and RQM) is broken. |
| PI54238 | Error when opening RM Admin Active Services ( copied from rm wi 92500 ). |
| PI52893 | Auth challenge issued by DelegatedAuthHandler not detected by IACS. |
| PI28909 | As a CLM deployment engineer, i need to be able to create friend relationship between Apps automatically during install or upgrades 6.0 [364095] to 5.0.2. |
| PI28909 | Backport JFS bulk delete can cause a OOM (371253). to 502. |
| PI28909 | DM needs to be able to change dependencies of immutable configurations managed by VVCConfigurationCacheService [backport to 5.0.2]. |
| PI41335 | SimpleDateFormat is not thread safe and cannot be shared among threads (Extracting Work Items via reportable API can return wrong modification dates for history entries). |
| PI44128 | [wi 361771] Ability to filter certain WI types out of DCC ETL. |
| PI44578 | ItemStateQueue must account for differences in collation order of non alphanumeric characters. |
| PI44578 | Online Migration may repeat states if DB collate order is not IDENTITY. |
| PI48537 | [RTC 5.0.2iFix009] WI: 360995: Ghost links appearing in traceability report. |
| PI49375 | (5.0.2) No Secure Token Error for JRS Widgets using Internet Explorer 11. |
| PI50923 | Backport defect 369390 TransactionalStateCache stores stale state data 502 Maintenance. |
| Rational Team Concert | |
| PI36458 | Regression from Defect 46203: No scrollbar on plan sidebar when needed. |
| PI39705 | Load for project area is not correct when there are subteams. |
| PI42502 | NullPointerException error exporting a plan. |
| PI22400 | repotools -renindex gives an error: SEVERE: Failed to register SecureProtocolSocketFactory. |
| PI25929 | RTC Planned-For drop down shows limited values. |
| PI27899 | Build subset not building all dependent items as expected. |
| PI28266 | Missing color expressions in 5.0.1. and newer (Server). |
| PI28449 | 'undefined' state shown in dynamic query selection from Work Item widget. |
| PI28775 | Adding literal to enumeration shows error. |
| PI28849 | Removing the summary from the header section causes formatting problems - Advanced Fix. |
| PI28849 | Removing the summary from the header section causes formatting problems. |
| PI28909 | Back-port defect 345830 to 5.0.2 iFix006 - userId in Git pre-receive hook is too brittle. |
| PI28909 | Back-port defect 347359 to 5.0.2 iFix005 - AbstractScmTypeHandler should implement INewTypeHandler.onTransactionFailed. |
| PI28909 | Backporting defect 353382. |
| PI28909 | SetBuildMapComponentUUIDTask - only the first 512 build maps are migrated. |
| PI28965 | Kanban/Taskboard group by owner is slow with many users. |
| PI29142 | Poor plan loading performance when there is a tree display with many layers. |
| PI29144 | Dependency build baseline creation should fail the build if the stream resource does not exist. |
| PI29144 | Dependency build failed when a stream is locked by a scan that was interrupted. |
| PI29150 | Clicking on "Select More Items" does not open the window "Access Context Selection" in the web client. |
| PI29386 | Long option labels are not shown in QueryableComboView. |
| PI29812 | parent links label when generated from work item template does not reflect latest summary when printed from the WebUI. |
| PI29832 | [5.0.2 iFix 002] Improve user experience when dealing with large (1000+ 2048+) numbers of components. |
| PI29946 | [Oracle] ROWNUM limit is applied before ORDER BY. |
| PI30052 | Visual Studio: ORA-01795: maximum number of expressions. |
| PI30143 | Eclipse and WebUI do not generate the same descriptor for parameterized queries. |
| PI30420 | Records marked as softdeleted in TIMESHEET could be active again - Java ETL. |
| PI30454 | ORA-01795 maximum number of expressions in a list is 1000 during CCM rebuildTextIndices. |
| PI30729 | WebUI - infinite calls to PlanRestService#postGetItems2() when loading a plan that has restricted visibility children. |
| PI30751 | DependencyQueryService should run against the file without dependencies once. |
| PI30770 | [RTC 5.0.2] [wi 339730] - MS932 encoded file is garbled in IE 10. |
| PI30880 | custom enum-type attribute is unexpectedly displayed in the history without "Synchronize Attributes" operation. |
| PI30901 | Removed team member is still visible in the Work Breakdown view on WebUI. |
| PI30946 | Dependency build automatically unlock the stream after 10 minutes. |
| PI31096 | Source Code Data scanning service not picking up file name changes. |
| PI31109 | Back-port defect 327641 to 5.0.2 iFix003 - Visual Studio: Cannot resolve a conflict because of this error message "Sync item with id '...' is not a conflict". |
| PI31196 | Unexpected tab "Ups..." after creating new plan. |
| PI31765 | Work items incorrectly linked to build when using subset builds. |
| PI31814 | Clicking "Owned by" header in the plan view sorts the owners based on UUID, not the name. |
| PI31829 | WorkItemPublisher does not check for array size in tagWorkItems(). |
| PI32139 | Correct NPE when non-BF engine is defined for a BF definition for 5.0.2. |
| PI32552 | Browser gets locked up in taskboard plan view with many owners. |
| PI32589 | Backport blocking synchronization requests from 3rd party tool with an external system (RTC) to 5.0.2. |
| PI32910 | class ISparqlQueryService failed to load for SystemDefinitionService. |
| PI32965 | Fix defect 342786 for 5.0.2 iFix stream. |
| PI33410 | Back-port defect 343463 to 5.0.2 iFix003 - RTC warehouse job SCM fails due to the error: [SQL0199] Keyword CONTENT not expected. |
| PI33548 | Slow performance accepting change sets on MS SQL Server. |
| PI33598 | Custom enum-type attribute is unexpectedly displayed in the work item editor without "Synchronize Attributes" operation. |
| PI33717 | Plans with Circular Tracks References do Not Open. |
| PI34027 | Adopt Only enumeration display name or value can be returned by Reportable REST API and not both (344297). |
| PI34063 | Getting errors when executing concurrent builds during accept changes. |
| PI34210 | Work Item Promotion creates a build property that can grow large enough to terminate the BFA process. |
| PI34450 | Backport defect 340225 to 5.0.2 iFix004 - Unable To View .h and .c Files in Web Client. |
| PI34496 | Drag &apm; Drop Edit of "Work Item" Editor Presentation Layout is not working in 5.0.2. |
| PI34523 | Investigate using transactional caches during history for versionable. |
| PI34523 | [Defect 344131] Investigate using transactional caches during history for versionable. |
| PI35066 | Promotion fails when there are more than 41 work-items. |
| PI35071 | buildReport.xml not available in post-build script. |
| PI35294 | Query Resolution column sometimes shows blank for Unassigned. |
| PI35370 | Can't query buildPath from build maps anymore. |
| PI35372 | When a gap is detected during promotion preview the error message displays the wrong change set. |
| PI35420 | Cross repository tracks links with Accumulated Time column causes refresh loop and empty summary. |
| PI35505 | [RTC 5.0.2] [WI 324870] Tool-tip for long values in the selection pulldowns disappear when search filter is applied. |
| PI36051 | Exclude plan items related filter does not work in Taskboard view. |
| PI36072 | Checkbox respond is slow when configuring Taskboard/Kanban States in Column Display tab. |
| PI36668 | User work environment hangs on "Loading" and never load any timeline/project areas. |
| PI36955 | Inconsistent case in translation of "Unassigned" fails to load work items ~ "Não Designado" vs. "Não designado". |
| PI37243 | Back-port defect 346552 to 5.0.2 iFix005 - RecentChangeSetsAffectingIterator pulls too much from the inner nodes affecting iterator. |
| PI37399 | Creating a new linked WI in another Project Area is not working anymore. It will always create a new WI in the SAME Project Area/. |
| PI37936 | Quick Planner default type issue. |
| PI38213 | Back-port defect 350470 to 5.0.2 iFix005 AcceptImpl.detectGaps should exhaust current page of iterator results before requerying. |
| PI38215 | Back-port defect 350386 to 5.0.2 iFix006 - Conflict move fails if changes include a folder swap and related file moves. |
| PI38701 | Backport of cross component move links from change sets that were migrated from 4.x are not resolved before distributing them to other servers. |
| PI38707 | Collecting buildable files takes a long time for dependency build after all the files changed. |
| PI38752 | Backport for error while saving the Build Forge BOM log on RTC. |
| PI38881 | The Build Forge step logs are published out of order in RTC when using inlines. |
| PI38928 | Tracks links missing in Plan View. |
| PI39164 | After 5.0.2 update from 4.x, Plans fail to load due to a NullPointerException. |
| PI39836 | Improve discard support in the preprocessor. |
| PI40349 | Adopt 355424: Timesheet reports are showing blank data. |
| PI40893 | Opening item from Recent Work Items list while a plan is open causes web browser to hang for over a minute. |
| PI41341 | Query feeds "My Teams..." and "My Work Item Changes" broken out-of-the-box. |
| PI41511 | Unable to import Unassigned owner from csv file to update the owner. |
| PI43630 | Quick Planner for Rational Team Concert. |
| PI44036 | Back-port defect 335485 to 5.0.2 iFix007 - Copy paste link from the "Modified" text next to the file path in the git commit details page in the web browser gives an error message. |
| PI45797 | configDetermineAncestorsInHistory should batch files in calls to getChangeSetsAffecting. |
| PI49918 | [RTC 5.0.2][WI 335146] Resolved work items no longer marked with strike through font on work item link tab. |
| PI50938 | Backport fix for the 2048 item limitation for EE logic. |
| PI28909 | Each build request initiated from RTC creates additional buildResultUUID parameter in the corresponding Jenkins workflow job for 5.0.2. |
| PI28909 | [RTC 5.0.2][372897] Compile problems in TransactionalCacheWrapper.java in rtc.601 RTC-I20151020-1437. |
| PI28909 | correctly handle duplicate buildPath entries for buildmaps to 502. |
| PI39163 | Service for script based value set provider may be running for long if http connector doesn't return response. |
| PI39308 | [RTC 5.0.2 iFix] [WI 352326] Fix for Error running Lifecycle Queries. |
| PI39836 | ConcurrentModificationException JFS exception thrown during concurrent builds. |
| PI40247 | Source code data scanning not handling component replacement correctly. |
| PI40272 | Backport of Defect 355395, fix for Defect 220917 causes behavior change and confusion. |
| PI40591 | Auto-resolve of conflict after reorder due to baseline accept picks wrong state for 5.0.2. |
| PI40592 | Unresolvable conflict can result from cross component move and subsequent pre-move changes with duplicate merges for 5.0.2. |
| PI41348 | Group should not show Items if all of them are outplaced. |
| PI42204 | [RTC 5.0.2][Defect 357856] Versionable change state not recalculated of folder add. |
| PI42494 | Select query from widget hangs on "Loading". |
| PI43385 | Attribute customization script calculation fails in Web UI. |
| PI44038 | Back-port defect 361277 to 5.0.2 iFix007 - Git Preview screen shows garbled characters for japanese labels. |
| PI44128 | [wi 361771] Ability to filter certain WI types out of DCC ETL. |
| PI44659 | Backport for force full analysis should cause dependency set comparison. |
| PI44665 | [5.0.2] Taskboard does not sort stories by anything other than Rank. |
| PI44820 | Modified By and Modified Date are set to Unassigned and None when a Custom Attribute is added to a Task. |
| PI45258 | [RTC 5.0.2] Unable to save links on draft work items. |
| PI45893 | Backport to RTC 5.0.2 iFix009 [Defect 363063] Unable to accept after merge - "not a file" error. |
| PI46581 | [RTC 5.0.2][WI 364981] ccm.log is flooded by CRJAZ0368E A database query could not run on the server. |
| PI46847 | [RTC 5.0.2iFix009] [WI 365108] Advanced Release Burndown widget counts workitems of excluded types. |
| PI47006 | [Defect WI 365747] Workspace load with many components takes more time than loading one component having the same total size of files. |
| PI47147 | StreamResource should be created, even if there's no file to scan in stream. |
| PI47601 | Backport to RTC 5.0.2 iFix009 - [366521] Migration fails if an HistoricBasis item gets modified after online migration has started. |
| PI48537 | [RTC 5.0.2iFix009] WI: 360995: Ghost links appearing in traceability report. |
| PI48645 | [RTC 5.0.2 iFix9][359058] Select query from widget hangs on "Loading" with NPE. |
| PI48970 | [RTC502][WI 366360]Eclipse hangs at Resolving unresolved links during CSV WI Import with Parent Links. |
| PI48744 | [RTC 5.0.2 ifix 12][wi 367748] Cannot access copied work item with custom category attribute after upgrade to 5.0.2. |
| PI49090 | EE Garbage collection should delete more BuildBaselines to 502. |
| PI49271 | DependencyQueryService no longer honors the Index Update Wait Time advanced property for 5.0.2. |
| PI49448 | [RTC 5.0.2] [wi 368139] Plan Statistics widget does not show all valid categories. |
| PI51582 | [RTC 5.0.2][WI 373469] RTC editable fields get reset when refreshed in Web UI. |
| PI51888 | Backport fix for more than 1000 build definitions with JBE for 5.0.2. |
| PI52129 | The 'com.ibm.team.enterprise.jfs.commons.query.JfsQuery' class constructor has changed between the 6.00 and the 6.01 version to 502. |
| PI51774 | Replace ProcessAreaDTO in GitRepositoryDescriptorDTO with a light-weight alternative. |
| PI51986 | [RTC 5.0.2 iFix] [WI 374493] Backport request for Defect 374493/PI51986 to iFix - Work Item getEditableProperties allValues for owner attribute load time grows proportionate to team size. |
| PI52580 | PLI source file leads to incorrect dependency path. |
| PI53012 | Customers migrating from RTC 4.x to RTC 6.x need to be able to skip redundant EE migration steps. |
|
This client update site contains fixes for the following defects: |
| APAR (WorkItem URL) | Description |
| RTC Eclipse Client | |
| PI28266 | Missing color expressions in 5.0.1. and newer (Eclipse Client). |
| PI28909 | Back-port defect 336181 to 5.0.2 iFix006 - An OutOfMemoryError can occur in RotatingDaemonTracer due to the eventQueue growing too large. |
| PI28909 | Clicking a buildmap from a build report does not open it with N-1 client. |
| PI30775 | Issue with cross component re-factor (move). |
| PI31109 | Fix for "327641: Cannot resolve a conflict because of this error message Problem running 'resolve conflict': <uuid> is not in conflict". |
| PI31251 | [RichUI] Item is not located under the correct Folder. |
| PI31674 | Sharing the query with a condition for querying multiple Types failed with a permission error. |
| PI33345 | Build test result contribution wrongly assumes source is Java class (Client). |
| PI33972 | Back-port defect 344241 to 5.0.2 iFix003 - scm [not lscm] move path command leads to RuntimeException of the type CLIClientException: Attempted to beginRule: P/* does not match outer scope rule: F/*. |
| PI34880 | Back-port defect 345551 to 5.0.2 iFix004 - NPE from scm show history. |
| PI34940 | Fix for Conflict move needs to include unparented adds or moves (345423). |
| PI36861 | Backport defect 348599 to 5.0.2 iFix004 - Moving an eclipse project in repository causes original project to become unshared, pending changes view still says its loaded. |
| PI38141 | Missing files in subset definition when adding files manually. |
| PI38273 | Back-port defect 351628 to 5.0.2 iFix005 - Exception occurred using CLI "scm move" command. |
| PI39460 | Wrong association to WI after build subset is reset. |
| PI41382 | Eclipse History view does not update when showing new component. |
| PI51650 | System Definitions Generator: missing generate Lang Defs Properties feature to 502. |
| SE59241 | SE59241 Language definitions appear in random order. |
| PI28909 | 5.0.2 Dependency Build: Select rebuild on a personal build uses the wrong workspace. |
| PI28909 | [5.0.2] IllegalArgumentException after alias file is updated by newer client. |
| PI28909 | [5.0.2] NPE when showing attributes involving an unknown read scope. |
| PI28909 | [5.0.2] [Eclipse] Backport a fix to prevent an NPE in the Repository Files view when an item has an access group for its read access. |
| PI41290 | Source Code Data query of files found in All Streams but not in specific stream. |
| PI42705 | [RTC 5.0.2][Defect 220094] Use "scm status" command to list the status of unloaded components of a workspace. |
| PI43455 | Backport to 5.0.2 iFix009 - [357110] RTC windows shell compare utility broken - no option to disable capping. |
| PI48970 | [RTC502][WI 366360]Eclipse hangs at Resolving unresolved links during CSV WI Import with Parent Links. |
| PI51773 | TITLE. |
| RTC Visual Studio Client | |
| PI25475 | [RTC for Visual Studio IDE] Unexpected line break in description and comment field. |
| PI28451 | [RTC for Visual Studio IDE] the cursor goes to the end of the previous line. |
| PI28909 | Request for multiple RTC 5.0.2 Backports [defects : 339231, 307440]. |
| PI28909 | address issue in item 340443 - 5.0.2 iFix004. |
| PI29663 | Visual Studio: 414 Request-URI Too Long error is thrown when Searching for Change set. |
| PI30674 | Change set search filters - "Created before" and "Created after" should work from beginning of day. |
| PI30675 | Clicking on a link that reports problems with multiple work items in Team Advisor fails. |
| PI31109 | Back-port defect 327641 to 5.0.2 iFix003 - Visual Studio: Cannot resolve a conflict because of this error message "Sync item with id '...' is not a conflict". |
| PI33273 | In intermediate history on a file, disable context menu options in case of Undo state. |
| PI35304 | HideIfInState property of Workitem editor presentation is not handled by the Visual Studio Client. |
| PI39104 | [RTC502][WI347291] Annotate is off by one line or half line in RTC VS Client. |
| PI39615 | [RTC502][wi 349242] Visual Studio: Filter Pending Changes doesn't work correctly. |
| PI39615 | [VS] The "Hide empty baselines" preference is not persisted across sessions. |
| PI42895 | Dependent enumeration not populated until WI save. |
| APAR (WorkItem URL) | Description | Steps to apply |
| Rational Jazz Foundation | ||
|
Fix defect in redirect web page. |
UPDATING APPLICATION WAR FILESNOTE: If the context root used by the any application is not the default, it will be necessary to rename the WAR file (and adjust some of the directory paths referenced below) based on the context root currently in use. For example,
In summary, the name of the WAR file needs to be the same as the respective context root in use. NOTE: For users of the RDNG browser add-on, the rm.war file must be properly matched with the browser plugin files. This only applies during installation of the plugin, so for those users that have already installed the plugin, no action is required. For any new installations of the browser plugin, the customer should contact IBM Support and request a refresh of the browser add-on files along with the properly paired version of the rm.war file that includes this fix. DEPLOYING ON WEBSPHERE APPLICATION SERVER
DEPLOYING ON TOMCAT
| |
| PI43630 |
Workaround: Action is required for a remote floating license server after an upgrade to version 5.0.2. |
After the upgrade of 5.0.2, if you use a floating license server that is not on the same sever as the JTS application you will need to apply the steps at https://jazz.net/library/article/1514. The steps for 5.0.2 are the same as the steps for 6.0. You will see an error numbered CRJAZ1507E indicating that there was an error communicating with the floating license server. |
| PI28909 |
"java.lang.IllegalStateException: zip file closed" error in patch service (Fix for 346222 for 5.0.2 release). |
See "UPDATING APPLICATION WAR FILES" section. |
| PI28909 | Use TLS instead of SSL by default. |
If you are running Tomcat as a Windows Service, you must change the Java Options being used:
|
| PI31655 | The LPA templates can not be retrieved after a migration from 5.0.1 (with a server rename) to 5.0.2. |
|
| PI33587 | [5.0.2] LocalGroupLDAP doesn't support case insensitive mode (343625). |
This change is only relevant if you need to use LocalGroupLDAP in case insensitive mode.
|
| PI33689 | All Project Areas are deleted during upgrade to RDNG 5.0.2 if finalizeApplicationMigration is rerun following a failure. |
|
| PI36961 | Full Text Search stemming doesn't work correctly in non-English European languages (Backport 345158 to 5.0.2 ). |
Language specific stemming is not enabled by default. To enable specific language stemming:
The setting has three values:
The stemmer uses the default language specified on the server machine. |
| PI41256 | RRC Project Baselines are inaccessible after migration from 4.0.x in a server renamed environment. |
NOTE: You only need to do this once per iFix install. If you have done these steps as the result of another fix, you can skip them. Performing the steps multiple times will not cause problems.
|
| PI44578 | ItemStateQueue must account for differences in collation order of non alphanumeric characters. |
NOTE: You only need to do this once per iFix install. If you have done these steps as the result of another fix, you can skip them. Performing the steps multiple times will not cause problems.
|
| PI43630 | Workaround: Action is required for a remote floating license server after an upgrade to version 5.0.2. |
After the upgrade of 5.0.2, if you use a floating license server that is not on the same sever as the JTS application you will need to apply the steps at https://jazz.net/library/article/1514. The steps for 5.0.2 are the same as the steps for 6.0. You will see an error numbered CRJAZ1507E indicating that there was an error communicating with the floating license server. |
| Rational Team Concert | ||
| PI22400 | repotools -renindex gives an error: SEVERE: Failed to register SecureProtocolSocketFactory. |
|
| PI28909 | Back-port defect 347359 to 5.0.2 iFix005 - AbstractScmTypeHandler should implement INewTypeHandler.onTransactionFailed. |
The server patch from this iFix must be applied to 5.0.2 server BEFORE running the migration scripts for the fix to take effect. |
| PI28909 | SetBuildMapComponentUUIDTask - only the first 512 build maps are migrated. |
This patch must be added to the 5.0.2 installation's patch directory after the 5.0.2 server is installed but BEFORE an attempt is made to migrate the 4.x or 5.0 data to 5.0.2. Since the fix is in the migration code itself, the issue can not be resolved if the 4.x or 5.0 has already been migrated to 5.0.2. In case for the migrated build definitions, customers have to set the property for each build definition in Properties tab as the following: team.enterprise.build.buildmaps.needMigrateComponent=true Then apply the fix and restart the 5.0.2 server, the migrated build definitions will be migrated again. Once the migration completed, the property above will be set to false by the migration service. |
| PI33345 | Build test result contribution wrongly assumes source is Java class (Toolkit). |
|
| PI33660 | Backport build: JBE changes directories when invoked on zLinux and PPC linux... |
When using jbe.sh for build on zLinux, pLinux and AIX for RTC 5.0.2, use the new jbe-i.sh or jbe-z.sh to replace <install-dir>/jazz/buildsystem/buildengine/eclipse/jbe.sh to fix APAR PI33660 depending on your platform. The script file should then be renamed to jbe.sh for compatibility with existing scripts. |
| PI36803 | com.ibm.team.enterprise.build.ant_1.0.700.v20130903_1628.jar is missing from 4.0.5GA Build Toolkit zip on Linux for System Z. |
com.ibm.team.enterprise.build.ant_1.0.1200.v20141119_0341.jar is missing from Build Toolkit zip on Linux for system z for RTC 5.0.2 causing a ClassNotFoundException when running package. Following the instructions below to apply the mising jar:
|
| PI41258 | Bring unedited 6.1.0.4 udclient.jar into the build toolkit. |
This defect requires additional steps to apply:
|
| PI43630 | Quick Planner for Rational Team Concert. |
For additional details of the Quick Planner feature along with defects resolved in previous iFeature releases, please visit Quick Planner iFeature for Rational Team Concert. |
| PI42500 | Backport of INSTREAM DD is exported as INPUT in RTC EE V5.0.2 Ant task for 5.0.2. |
Remove the existing jars from the existing zos-systemdefinition-toolkit-RTC-I20141031-0926.zip. Expand the zip with the contents of the iFix toolkit zos-systemdefinition-toolkit-RTC-I20150806-2102.zip |
| PI51773 |
Unable to retrieve ownedby attribute for snapshot. |
|
Known Side Effects
Review the 5.0.2 Release Notes page on jazz.net for links to queries that list known problems and workaround articles for this release. |
Open defectsReview the following list of open APARs for Rational Team Concert on the IBM Support Portal. Review technote 1461170: Open APARs for Rational products available on the Web for information on how to configure your MyNotifications subscription account and subscribe to the APARs you are interested in following. |
Change History
No new features or functions in this iFix. |
Review the 5.0.2 New and Noteworthy page on jazz.net for a description of the new features included in this release. |
Click the link in the Download Options column:
Product Synonym
Rational Team Concert
Problems (APARS) fixed
Was this topic helpful?
Document Information
Modified date:
20 July 2018
UID
swg24041655