IBM Support

IBM Tivoli Netcool/Impact V7.1.0 Fix Pack 5(7.1.0-TIV-NCI-FP0005)

Download


Abstract

This Fix Pack will address problems found in Netcool/Impact V7.1.0

Download Description

**********************************************************
* NOTE !! Before installing this Fix Pack, a health check script MUST be
* executed. The purpose of this Health Check, is to detect potential issues
* on the environment, prior to the installation of a Fix Pack. Failing to
* perform a Health Check, could potentially affect the Fix Pack installation
* process; which might lead to a failed Fix Pack install. The health check
* script can be downloaded from the fixcentral link, detailed at start
* installation instructions below.
*
* A change introduced by this Fix Pack might negatively
* affect existing product function.
*
* Please refer to APAR IV90357 for a description of the
* problem and corrective action.
*
* Please refer to APAR IV89653 for a description of the
* problem and corrective action.
*
* Please refer to APAR IV86760 for a description of the
* problem and corrective action. IMPACTUI DOES NOT HANDLE EAST
* ASIAN LANGUAGE IN UI DATA PROVIDER POLICY RELATED ACTIONS
*
* Evaluate these APARs for the potential impact in your environment.
*************************************************************

7.1.0.5 Release addresses the problems that have been reported in IBM Tivoli

Netcool/Impact version 7.1, 7.1.0.1, 7.1.0.2, 7.1.0.3 and 7.1.0.4. This is a Fixpack only release and not a refresh of full installer. It can only be applied on a previous Impact 7.x release (7.1, 7.1.0.1, 7.1.0.2, 7.1.0.3 and 7.1.0.4).

The following table contains a list of files included in this Fix Pack and operating systems associated with these files:


Platform File

AIX * 7.1.0-TIV-NCI-AIX-FP0005.zip
Linux * 7.1.0-TIV-NCI-LINUX-FP0005.zip
Solaris * 7.1.0-TIV-NCI-SOLARIS-FP0005.zip
Windows * 7.1.0-TIV-NCI-WINDOWS-FP0005.zip
zLinux * 7.1.0-TIV-NCI-ZLINUX-FP0005.zip

all platforms * 7.1.0-TIV-NCI-FP0005.README

Note: The installer only works for 64 bit architectures
Note: Whenever <ARCH> is used in the text of this readme, as part of the
filename of the Fix Pack package, it refers to, and can be
substituted for one of the following operating systems:

* AIX
* Linux
* Solaris
* Windows
* zLinux


Hardware and software requirements
For information about supported hardware and software, check the

Software Product Compatibility Reports (SPCR) here:
http://www-969.ibm.com/software/reports/compatibility/clarity/index.html

And the Planning Section in the Netcool/Impact Administration Guide:
http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/admin/imag_start_c.html

Additional information
For Tivoli Netcool/Impact 7.1.0.5 Documentation, please refer to:

http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/welcome_kc.html

List of APARs
Fixes (APARs) Included In this Fix Pack.

The following Netcool/Impact APARs are delivered with Fix Pack 5:

IV75602: DERBY REPLICATION DOES NOT WORK CONSISTENTLY BETWEEN IMPACT CLUSTER MEMBERS
IV78525: JAVASCRIPT SYNTAX CHECKER FLAGS LINE INCORRRECTLY AS AN ERROR
IV78678: UNABLE TO CREATE NEW UI PROVIDER DATA TYPES WHEN THE DATASET NAMES CONTAIN NEWLINES
IV79004: DIRECTSQL ON OPERATOR VIEW POLICY DOESN'T WORK AFTER FP1
IV79133: EVENT READER STOPS WHEN OBJECT SERVER BECOMES UNAVAILABLE AND DOES NOT RECOVER:REGRESSION
IV79363: STARTING TIME FOR POLICY ACTIVATOR SERVICES IS NOT CORRECTLY LOGGED
IV79827: WEBSERVICE LISTENER IMPLEMENATION TO WORK SAME WAY ON IMPACT 511 IN IMPACT
IV79867: COMMAND LINE METHOD TO DELETE IMPACT ITEM (POLICY/SERVICE) IS NOT WORKING
IV79910: REXTRACTALL FUNCTION DOES NOT RETURN MATCHING CONTENT :REGRESSION
IV80038: ERROR GENERATED WHEN LOG POLICY FUNCTION USED WITH NULL ORGNODE
IV80183: POLICYLOGGER ON SECONDARY DON'T GET UPDATE IT
IV80613: WITH IMPACT POLICY, OUTPUT OF SNMPGETNEXTACTION IS GARBLED
IV80747: THE PARAMETER SECURITYTOKENFROMREQUEST HAS THE SESSION INFORMATION
IV80800: POLICY CHAINING NOT FUNCTIONAL IN 7104: REGRESSION
IV80818: POST MIGRATING TO 710 POLICY PROCESSING TIME DETERIORATED: REGRESSION
IV80891: POLICY LOGGER THROWS EXCEPTIONS WHEN PROCESSING SQL PARAMETERS TO LOG
IV81135: JAVA ISSUE AFTER INSTALLING FP4 FOR IMPACT 7.1 :REGRESSION: AIX
IV81155: WEB SERVICES DSA INTERMITTENT CLASS NOT FOUND EXCEPTION
IV81630: USING THE NCI_EXPORT UTILITY ON A IMPACT 7.1 INSTALL, WHICH IS ON A SOLARIS OPERATING SYSTEM, RESULTS IN AN ERROR
IV81644: UNABLE TO CREATE RE/SE CONFIGURATION WHEN USING MSSQL DATABASE
IV83071: INCORRECT ENTRIES FOR NWEEKDAYOFMONTH FIELD BY POLICY OPVIEW_ADDRWIN
IV83358: ATTEMPTING TO ADD A RECURRING MWM WINDOW FOR ALL NTH WEEKDAY OPTIONS PRODUCES ERROR REGARDING THE DERBY FIELD SIZE
IV81613: NCI_TRIGGER REPORTS SUCCESS WHEN INCORRECTLY RUN AGAINST A NON-EXISTENT POLICY

List of Impact APARs that have documentation updates or have additional information:

IV75734: ERROR HANDLING NOT HANDLE BY POLICY EXECUTED FROM POLICY ACTIVATOR
IV79086: LACK OF DETAILED DESCRIPTION OF FEDERATING LDAP
IV79133: EVENT READER STOPS WHEN OBJECT SERVER BECOMES UNAVAILABLE AND DOES NOT RECOVER:REGRESSION
IV79631: RUNPOLICY FUNCTION IN IMPACT 7.1 DOC NEEDS TO BE CORRECTED IN SOME PLACES

To check the APARs that were part of the previous FixPack (7.1.0.4), please check this link:

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Tivoli%20Netcool%20Impact/page/Impact%207.1.0.4%20README


Browser Support with Fix Pack 5
Impact 7.1.0.5 supports:

Firefox ESR 38
Internet Explorer 10 and 11

Component Updates
1. Java has been updated to version 7.0.9.30
2. Websphere Liberty has been updated to version 8.5.5.6 + PI45266 + PI52103 + PI56455 + PI55670 + PI47476


Enhancements in Fix Pack 5
Fix Pack includes the following enhancements:

Maintenance Mode Windows (MWM)
• MWM: Ability to edit existing Maintenance Mode Windows
https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=39325
• MWM: Ability to Sort Column Data (Ascending/Descending) order by clicking the Column Header
• MWM: New MWM User Role called impactMWMUser was added to allow Read/Write Access only to MWMs created by a specific user. This is in addition to the impactMWMAdminUser provided in Impact 7104 that allows access to all Maintenance Mode Windows.
https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=21122
https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=31779


Operator Views
• New Operator View User Role called impactSelectedOpViewUser to allow access only to selected Operator Views. This addresses the requirements raised for these RFEs:
https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=46810
https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=15793
https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=39324

• Operator View access auditing by logging Operator View related activities in opviewaudit.log

UI Provider
• Ability to customize the Topology widget layout.
• Ability to set Nodes links with different status than the child node

User Interface
• Ability to search data in the rows/columns of the View Data Items Page
• Updated Error messages and Dialogs

Install
• Autostartup scripts to configure Impact, GUI and JRExec servers to autostart on machine reboot
• Added support for RHEL 7.2, SUSE 12 SP1 and Solaris 11.3


Service Level Objectives (SLO) Reporting Enhancements
The information in this section applies only if you have deployed the Impact Solution called "Service Level Objectives (SLO) Reporting". The following changes were made for Fixpack 5:
• Addition of a primary key column for SLO_CONFIGURATION table added in Fixpack 4.
• Miscellaneous fixes and performance improvements, including improved design for sample policies that collect data from the TBSM Metric History database.

This function is documented on the following page in the Knowledge Center: http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/solution/imsg_slo_reporting_c.html?lang=en

If you have not deployed this solution, then you can skip this section.

Update the SLORPRT database schema using the following steps:

a) You will need access to the machine where the SLORPRT database was installed. If this database has not been installed, then the SLO solution has not been deployed and there is no need to continue this update to the schema.
b) It is recommended to make a backup of the SLORPRT database before continuing.
c) Copy sql files needed to update the SLORPRT database schema:

If you have not previously installed Fixpack 3, copy files add_timezone.sql and update_views_timezone.sql from [InstallDirectory]/impact/add-ons/slo/db to a location accessible from the system you will use to update the database schema in the next step.

If you have not previously installed Fixpack 4, copy file slo_utility.sql from [InstallDirectory]/impact/add-ons/slo/db to a location accessible from the system you will use to update the database schema in the next step.

Copy file slo_configuration_pkey.sql from [InstallDirectory]/impact/add-ons/slo/db to a location accessible from the system you will use to update the database schema in the next step.

d) Open a DB2 command window on a system with access to the SLORPRT database and run the following commands based on what you have previously installed:

db2 connect to SLORPRT user dbuser using dbpassword
(replace dbuser and dbpassword with the user/password specified in datasource SLOReportDatasource )


If you have NOT previously installed Fixpack 3

db2 -tvf <slo_sql_dir>/add_timezone.sql

db2 -tvf <slo_sql_dir>/update_views_timezone.sql

db2 -tvf <slo_sql_dir>/slo_utility.sql

If you have not previously installed Fixpack 4

db2 -tvf <slo_sql_dir>/slo_utility.sql

If you have previously installed Fixpack 4

db2 -tvf <slo_sql_dir>/ slo_configuration_pkey.sql


db2 connect reset

Where <slo_sql_dir> would be [InstallDirectory]/impact/add-ons/slo/db if on the same machine as the Impact server, or the directory where you copied the files in step c if the SLORPRT database is on a different machine.

Prerequisites


Tivoli Netcool/Impact 7.1.0

Netcool/Impact version 7.1, 7.1.0.1, 7.1.0.2, 7.1.0.3 and 7.1.0.4. This is a Fixpack only release and not a refresh of full installer. It can only be applied on a previous Impact 7.x release (7.1, 7.1.0.1, 7.1.0.2, 7.1.0.3 and 7.1.0.4).

This fixpack is a cumulative fixpack, in other words you can apply it to any of the previous 7.x releases (7.1, 7.1.0.1, 7.1.0.2, 7.1.0.3, 7.1.0.4) including Intermix Fix releases (IF2 and IF3) for both Impact Core and Impact for NOI releases.

Installation Instructions

***********************************************************************************************************************
* Before installing this Fix Pack, it is recommended to run the following health check script to verify the system.
* See Fix Central: http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Netcool+Impact&fixids=impact_server_health_check&source=SAR
*
* If any problem is reported by this script, it is essential that these are resolved before the Fix Pack is installed.
* Instructions for running Health Check Scripts:
* 1. unpack the zip to <Impact Install Directory>/install/configuration/cfg_scripts
* 2. For UNIX, make the script executable with either:
* chmod u+x impact_server_health_check.sh
* or
* chmod 744 impact_server_health_check.sh
* 3. Execute either the bat or sh script, from <Impact Install Directory>/install/configuration/cfg_scripts
* 4. For UNIX, run using
* <Impact Install Directory>/install/configuration/cfg_scripts/impact_server_health_check.sh
* 5. For WINDOWS , run using
* <Impact Install Directory>/install/configuration/cfg_scriptsimpact_server_health_check.bat
* 6. Scripts are successful, if the following is seen:
* On Unix:
* checkownership completed successfully!
* BUILD SUCCESSFUL
* On Windows:
* BUILD SUCCESSFUL
* Only install the Fix Pack if the script is successful.
* 7. Please NOTE!!!
* The Health Check will recycle the Impact server, therefore, it's recommended that you only run it during
* scheduled downtime.
*
* The Impact 7.1.0 FP 10 installer, will automatically run the same logic.
* Please refer to APAR IV95469 for a description of the problem and corrective action.
*
************************************************************************************************************************


Before you begin applying the Fix Pack

Backing up Directories

To apply this Fix Pack you will need 3 GB of free disk space

Check Instructions mentioned here:
http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/admin/imag_upgrade_back_up_directories_t.html


This Fix Pack does not backup the entire Impact application. It only makes a backup of Impact configuration files.

A backup copy of Impact configuration files is located at [ImpactInstallDirectory]\backup\install



3.3 Extracting Fix Pack files



3.3.1 Extracting on Linux, Solaris, AIX , Windows and zLinux platforms

1. Copy the 7.1.0-TIV-NCI-<ARCH>-FP0005.zip file to your system.

2. Create a directory Impact_FP5 for example.

3. Unzip the file 7.1.0-TIV-NCI-<ARCH>-FP0005.zip to directory Impact_FP5.



3.3.2 Fix pack directories



When you extract the Fix Pack file, the following directories are created:



ImpactExtRepository (Contains Impact Extensions for NOI, Server and GUI Server updates)

ImpactRepository (Contains Impact Server and GUI Server updates)

response files (Contains response files for silent update)

scripts files (Contains installer update files)

and the following files are available:
update_console.sh (Update in console mode)

update_gui.sh (Update in GUI mode)

update_silent.sh (Update in Silent mode)



3.3.3 Installing Fix Pack in GUI and Console Mode

Check Instructions Here:

http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/admin/imag_upgrade_gui_and_console_t.html



3.3.4 Installing Fix Pack in Silent Mode


Check Instructions Here:


http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/admin/imag_upgrade_silent_mode_t.html



3.4 Installation in a Cluster Environment



Stop all Impact servers in a cluster environment before and after each update.



Example: A two server cluster would be updated as follows:

1) Stop all servers in the cluster

2) Update the primary

3) Stop the primary

4) Update the secondary

5) Stop the secondary

6) Start the primary

7) Start the secondary



3.5 Post Fix Pack Considerations



The Browser cookies and cache should be cleaned up before launching the UI. If you are using IE and have the Impact URL saved to your Favorites, then you must ensure that the "Preserve Favorites website data" is not enabled.



3.6 Rollback to previous version



You can remove the Fix Pack by doing a rollback to a previous version.

This rollback process is different from uninstall which removes Impact product entirely.



Check instructions here:

http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/admin/imag_rollback_to_prev_netcoolimpact.html


3.7 Recovering from a failed Fix Pack installation

Check instructions here:

http://www-01.ibm.com/support/knowledgecenter/SSSHYH_7.1.0.5/com.ibm.netcoolimpact.doc/admin/imag_restore_ni_backup_directories.html



3.8 Policies overwritten by this Fix Pack



When applying Test Fixes and Interim Fixes/Fix Packs to an existing system, the policies
provided by Netcool/Impact may be overwritten with newer versions to fix issues. If these policies contain custom changes, you will need to update these newer files with the custom changes.


In this Fix Pack, the following policies have been updated and would be overwritten:

NCI_ITNMSamplePolicy.ipl
NCI_MWM_Add1TWin.ipl
NCI_MWM_AddRWin.ipl
NCI_MWM_OneTimeWindows.ipl
NCI_MWM_OneTimeWindows.params
NCI_MWM_RecDomWindows.ipl
NCI_MWM_RecDomWindows.params
NCI_MWM_RecDowWindows.ipl
NCI_MWM_RecDowWindows.params
NCI_MWM_RecWDomWindows.ipl
NCI_MWM_RecWDomWindows.params
NCI_RBA_EventsProcessing.js
NCI_RBA_Utils.js

and the following are the new policies shipped in this Fixpack:

NCI_MWM_Util.ipl
NCI_OV_AddUserOrGroup.ipl
NCI_OV_GetUsersAndGroups.ipl
NCI_OV_GetUsersAndGroups.params
NCI_OV_ListUsersAndGroups.ipl
NCI_OV_RemoveUserOrGroup.ipl


If you are using a Netcool Operations Insight (NOI) install, the following policies would be overwritten:

NCI_acknowledgeSeasonalReportEntry.js
NCI_ConfigureResults.js
NCI_NOI_ConfigureAnalytics.params
NCI_NOI_CONSTANTS.js
NCI_NOI_DB2QUERY.js
NCI_NOI_DefaultValues_Comments.js
NCI_NOI_DefaultValues_Configure.js
NCI_NOI_DefaultValues_Export.js
NCI_NOI_DELETEREPORT.js
NCI_NOI_GETANALYTICSCONFIG.params
NCI_NOI_MSSQLQUERY.js
NCI_NOI_ORACLEQUERY.js
NCI_NOI_UTILS.js
NCI_RE_ACT_ACKNOWLEDGE.js
NCI_RE_ACT_ACTIVATE.js
NCI_RE_ACT_ARCHIVE.js
NCI_RE_ACT_DELETEEVENT.js
NCI_RE_ACT_DELETEGROUP.js
NCI_RE_ACT_GROUPSYNTHETIC.js
NCI_RE_ACT_NEW.js
NCI_RE_ACT_RESETPERF.js
NCI_RE_ACT_SETPARENT.js
NCI_RE_ACT_UNACKNOWLEDGE.js
NCI_RE_ACT_WATCH.js
NCI_RE_CONFIGURE.js
NCI_RE_CONSTANTS.js
NCI_RE_GETCONFIGS.js
NCI_RE_GETCONFIGS_ARCHIVED.params
NCI_RE_GETCONFIGS_EXPIRED.params
NCI_RE_GETCONFIGS_WATCHED.params
NCI_RE_GETGROUPEVENTS.js
NCI_RE_GETGROUPEVENTS_ACTIVE.params
NCI_RE_GETGROUPEVENTS_ARCHIVED.params
NCI_RE_GETGROUPEVENTS_EXPIRED.params
NCI_RE_GETGROUPEVENTS_NEW.params
NCI_RE_GETGROUPEVENTS_WATCHED.params
NCI_RE_GETGROUPINSTANCE.js
NCI_RE_GETGROUPINSTANCES.js
NCI_RE_GETGROUPS.js
NCI_RE_GETGROUPS_ACTIVE.params
NCI_RE_GETGROUPS_ARCHIVED.params
NCI_RE_GETGROUPS_EXPIRED.params
NCI_RE_GETGROUPS_NEW.params
NCI_RE_GETGROUPS_WATCHED.params
NCI_RE_GETGROUPTIMELINE.js
NCI_RE_PROCESS.js
NCI_RE_PROCESSEVENT.js
NCI_RE_RULE.js
NCI_RE_RULE.params
NCI_RE_STARTPROCESSING.js
NCI_RE_UIHELPER.js
NCI_RE_UTILS.js
NCI_seasonalityProcess.js
NCI_SE_CONFIGRULES.js
NCI_SE_GETCONFIGS.js
NCI_SE_GETHISTORICALEVENTS.js
NCI_SE_GETRELATEDEVENTSGROUP.js
NCI_SE_GETRELATEDEVENTSGROUP.params
NCI_SE_RULE_ACTIONS.js
NCI_SE_RULE_RESET_STATS.js
NCI_SE_UTILS.js
NCI_unacknowledgeSeasonalReportEntry.js

and the following are the new policies shipped for a NOI install:


NCI_NOI_OBJECTSERVERSFIELDSMAPPING.js
NCI_NOI_OBJECTSERVERSFIELDSMAPPING.params
NCI_PG_ALLOCATE_PATTERNS_GROUPS.js
NCI_PG_ALLOCATE_PATTERNS_GROUPS_FORCE.js
NCI_PG_CLEARPATTERNINSTANCES.js
NCI_PG_DELETE_PATTERN.js
NCI_PG_DELETE_PATTERN.params
NCI_PG_GETALLTYPES.js
NCI_PG_GETALLTYPES.params
NCI_PG_GETGENERALIZEDPATTERNS.js
NCI_PG_GETGENERALIZEDPATTERNS.params
NCI_PG_GETPATTERN.js
NCI_PG_GETPATTERN.params
NCI_PG_GETTYPES.js
NCI_PG_GETTYPES.params
NCI_PG_MANAGETYPES.js
NCI_PG_MANAGETYPES.params
NCI_PG_PATTERN_ACTIONS.js
NCI_PG_PATTERN_ACTIONS_ACTIVE.js
NCI_PG_PATTERN_ACTIONS_ARCHIVE.js
NCI_PG_PATTERN_ACTIONS_EXPIRE.js
NCI_PG_PATTERN_ACTIONS_NEW.js
NCI_PG_PATTERN_ACTIONS_WATCH.js
NCI_PG_PATTERN_RESET_PERFORMANCE_STATS.js
NCI_PG_PROCESSPATTERNS.js
NCI_PG_PROCESSTYPES.js
NCI_PG_SAVEPATTERN.js
NCI_PG_SAVEPATTERN.params
NCI_PG_STARTTESTGROUP.js
NCI_PG_TESTGROUPS.js
NCI_PG_TESTGROUPS.params
NCI_PG_UTILSGROUP.js
NCI_RE_GETGROUPINSTANCEV1.js
NCI_RE_GETGROUPINSTANCEV1.params
NCI_RE_GETGROUPSOURCES_ACTIVE.js
NCI_RE_GETGROUPSOURCES_ACTIVE.params
NCI_RE_GETGROUPSOURCES_ARCHIVED.js
NCI_RE_GETGROUPSOURCES_ARCHIVED.params
NCI_RE_GETGROUPSOURCES_EXPIRED.js
NCI_RE_GETGROUPSOURCES_EXPIRED.params
NCI_RE_GETGROUPSOURCES_NEW.js
NCI_RE_GETGROUPSOURCES_NEW.params
NCI_RE_GETGROUPSOURCES_WATCHED.js
NCI_RE_GETGROUPSOURCES_WATCHED.params
NCI_RE_GET_TEST_GROUPS.js
NCI_RE_GET_TEST_GROUPS.params
NCI_RE_GET_TEST_PROGRESS.js
NCI_RE_GET_TEST_PROGRESS.params
NCI_RE_GROUPEVENTS.js
NCI_RE_GROUPEVENTS.params
NCI_RE_GROUPS.js
NCI_RE_GROUPSOURCES.js
NCI_RE_GROUPSOURCES.params
NCI_RE_GROUPS_ACTIVE.js
NCI_RE_GROUPS_ACTIVE.params
NCI_RE_GROUPS_ARCHIVED.js
NCI_RE_GROUPS_ARCHIVED.params
NCI_RE_GROUPS_EXPIRED.js
NCI_RE_GROUPS_EXPIRED.params
NCI_RE_GROUPS_NEW.js
NCI_RE_GROUPS_NEW.params
NCI_RE_GROUPS_WATCHED.js
NCI_RE_GROUPS_WATCHED.params

On
[{"DNLabel":"7.1.0-TIV-NCI-AIX-FP0005","DNDate":"25 Mar 2016","DNLang":"English","DNSize":"749458310","DNPlat":{"label":"AIX","code":"PF002"},"DNURL":"http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Netcool+Impact&fixids=7.1.0-TIV-NCI-AIX-FP0005&source=SAR","DNURL_FTP":" ","DDURL":null},{"DNLabel":"7.1.0-TIV-NCI-LINUX-FP0005","DNDate":"25 Mar 2016","DNLang":"English","DNSize":"1234379554","DNPlat":{"label":"Linux","code":"PF016"},"DNURL":"http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Netcool+Impact&fixids=7.1.0-TIV-NCI-LINUX-FP0005&source=SAR","DNURL_FTP":" ","DDURL":null},{"DNLabel":"7.1.0-TIV-NCI-SOLARIS","DNDate":"25 Mar 2016","DNLang":"English","DNSize":"732857545","DNPlat":{"label":"Solaris","code":"PF027"},"DNURL":"http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Netcool+Impact&fixids=7.1.0-TIV-NCI-SOLARIS-FP0005&source=SAR","DNURL_FTP":" ","DDURL":null},{"DNLabel":"7.1.0-TIV-NCI-WINDOWS-FP0005","DNDate":"18 Mar 2016","DNLang":"English","DNSize":"774818844","DNPlat":{"label":"Windows","code":"PF033"},"DNURL":"http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Netcool+Impact&fixids=7.1.0-TIV-NCI-WINDOWS-FP0005&source=SAR","DNURL_FTP":" ","DDURL":null},{"DNLabel":"7.1.0-TIV-NCI-ZLINUX-FP0005","DNDate":"25 Mar 2016","DNLang":"English","DNSize":"764031706","DNPlat":{"label":"z/OS","code":"PF035"},"DNURL":"http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Netcool+Impact&fixids=7.1.0-TIV-NCI-ZLINUX-FP0005&source=SAR","DNURL_FTP":" ","DDURL":null}]
[{"Product":{"code":"SSSHYH","label":"Tivoli Netcool\/Impact"},"Business Unit":{"code":"BU004","label":"Hybrid Cloud"},"Component":"--","Platform":[{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"},{"code":"PF002","label":"AIX"},{"code":"PF035","label":"z\/OS"}],"Version":"7.1.0","Edition":"Advanced"}]

Problems (APARS) fixed
IV75602 IV78525 IV78678 IV79004 IV79133 IV79363 IV79827 IV79867 IV79910 IV80038 IV80183 IV80613 IV80747 IV80800 IV80818 IV80891 IV81135 IV81155 IV81630 IV81644 IV75734 IV79086 IV79133 IV79631 ;IV72531 IV74071 IV74485 IV74878 IV75552 IV75913 IV76395 IV76875 IV77882 IV77953 IV78327 IV79776 IV79806 IV60062 IV65958 IV66441 IV66950 IV68163 IV68195 IV68934 IV69164 IV69904 IV70656 IV70712 IV70836 IV71068 IV71157 IV71513 IV71554 IV72091 IV72486 IV72561 IV72673 IV73098 IV73376 IV73620 IV74071 IV74211 IV74300 IV74421 IV74765 IV75085 IV70628 IV68912 IV74334 IV70784 IV69906 IV55989 IV59886 IV60438 IV61084 IV61538 IV61725 IV61956 IV62792 IV63137 IV63138 IV63535 IV63942 IV64075 IV64152 IV64837 IV65055 IV65179 IV66164 IV66210 IV66337 IV67091 IV67829 IV67936 IV68383 IV55600 IV66968 IV67231 IV67839 IV67936 IV83358 IV83071 IV81613

Document Information

Modified date:
15 June 2018

UID

swg24041270