IBM Support

Rational Integration Tester Fix Pack 4 ( for 8.5



IBM Rational Integration Tester (RIT) is available for download. It contains fixes to version 8.5 components including all predecessor fix packs.

Download Description

Table of Contents
Sections Description

The Change history section provides an overview on what is new in this release with a description of any new functions or enhancements when applicable.

The How critical is this fix section provides information related to the impact of this release to allow you to assess how your environment may be affected.

The Prerequisites section provides important information to review prior to the installation of this release.

The Download package section provides the direct link to obtain the download package for installation in your environment.

The Installation instructions section provides the installation instructions necessary to apply this release into your environment.

The Known side effects section contains a link to the known problems (open defects) identified at the time of this release.

Supporting Documentation
Document Description

Click to review the detailed system requirements information for a complete list of hardware requirements, supported operating systems, prerequisites and optional supported software, with component-level details and operating system restrictions.

IBM Knowledge Center provides an entry point to product documentation. You can view, browse, and search online information related to the product.

Click to review a complete list of the defects (APARs) resolved in this release including a list of resolved defects for the entire version family.

Find technical developer content and resources.


Prerequisites include:

Version of IBM Installation Manager required: IBM Installation Manager 1.6.3.

Installation Instructions

Review the Installing page in the IBM Knowledge Center.

Install the Fix Pack using the Update wizard in IBM Installation Manager.


Download the software from Fix Central.

  1. After the download completes, open the Installation Manager, click File, and select Preferences.
  2. Click Add Repository and browse to the location of the folder that contains the downloaded files.
  3. Start the IBM Installation Manager.
  4. Click Update and follow the instructions in the wizard.

Download Package

The following sections provide detailed information related to this release.

Click the FC link below to obtain the release from Fix Central.

How critical is this fix?

Impact Assessment
Impact Description

This is a maintenance release. It contains fixes for client-reported and internally found defects.

Test Results


Regression: An error in the Maintenance Delivery Vehicle (MDV) that produces incorrect or unexpected behavior causing a supported feature to stop functioning as designed.
This includes:

  • Coding errors that cause a regression
  • Documentation or packaging problems that cause a regression
  • Errors reported in a new function delivered in a MDV that cause a regression

Incomplete: An error in the MDV has not regressed, but does not work as designed.
This includes:

  • Fixed APARs which did not solve the original problem but did not break anything new
  • APARs reporting documentation errors, such as readme errors, that cause problems applying an MDV but do not lead to a regression

  • Regression and incomplete APARs are considered fix-in-error or MDV-in-error
  • Definitions above apply only to valid APARs that result in product fixes (APARs returned as working-as-designed are not assessed for being fix-in-error)
  • Issues in major releases due to new functionality do not apply in this definition

There are no known regressions to report.

Problems Solved

Defects resolved

Click the Fix List link in the table of contents above to review a list of the problems solved in this release.

Known Side Effects

Open defects

Review the following list of open defects for Rational Integration Tester among the defects for Rational Test Workbench on the IBM Support Portal page.

Review technote 1461170: Open APARs for Rational products available on the Web for information on how to configure your MyNotifications subscription account and subscribe to the APARs you are interested in following.

Review the following list of known issues and open defects:

Review the following list of known issues.

Known issues

51841When the user attempts to update Rational Integration Tester from version 8.0 or later to another fix pack or release, IBM Installation Manager version or older can fail to display the available updates. The problem is the result of the update site requiring the TLS protocol, which is only available with Installation Manager 1.8.1 and later. This problem is documented in the following technote:

The solution is to use Installation Manager version 1.8.1 to update Rational Integration Tester version 8.0 or later.

64038Issue with 8.5.0.x upgrades on Solaris

On Solaris machines that do not have any printers configured on them, using Installation Manager to upgrade an existing 8.5.0.x version of any of the components of Rational Integration Tester to or will fail. The installation process will hang after the selection of the Rational Integration Tester component for upgrade.

There are two workarounds for this issue:

1) Configure a printer on the machine. This will allow the installation to complete.

2) Perform the installation and upgrade in a single step using the Rational Test Workbench, Rational Test Virtualization Server, or Rational Performance Test Server launchpad from the 8.5.0 release. If any Rational Integration Tester components are already installed, they must first be removed using Installation Manager. Then re-install the offering using the launchpad and associated images from Passport Advantage. At the start of the installation process, on the Install Packages page, Click Check for Other Versions, Fixes, and Extensions to find fixes, and select the fix pack. This will cause Installation Manager to apply the fix pack as part of the initial installation, which does not have the issue with the printers (as described above).

This affects upgrades to Rational Integration Tester, Rational Integration Tester Agent, Rational Test Control Panel, and Rational Integration Tester Platform Pack.

The base 8.5.0 installation (from Passport Advantage) of these components is not affected.

39739When upgrading the Rational Integration Tester Agent on the Windows Server 2008 platform then, if the existing Agent is installed as a Windows server it is advisable to stop the service before attempting to perform the upgrade otherwise errors may occur. To do this, open Control Panel to: Control Panel\System and Security\Administrative Tools, then stop the 'IBM RIT Agent' service.

38668When a user creates a subfolder under an operation in Rational Integration Tester, then creates a stub in that subfolder, and then publishes the stub to Rational Test Control Panel, the stub will not be visible from the RTCP dashboard although the publish process will appear to have worked correctly. To avoid this problem, move the stub directly under the operation so that it is not within a subfolder.

38426On Microsoft Windows, if users attempt to uninstall, or rollback Rational Integration Tester Agent and Rational Test Control Panel components at the same time and both are installed as Windows services and both services are running and stubs have been run after the Agent service was started, uninstallation will fail, warning that prunsrv.exe could cannot deleted. If this occurs, user must delete the files from the installation directory manually before starting a new installation.

This problem may also occur when upgrading from 8.5.0 to or when rolling back an installation to 8.5.0.

To avoid this problem, users should either uninstall/rollback the components separately or stop both Windows services before starting the process.

CICS DPL virtualization JVM process

When using the CICS DPL virtualization solution, the CICS JVM process must be configured to have a maximum Java heap size of at least 512M. In IBM’s testing, values of less than this led to JVM failures during recording or virtualization of CICS programs.


Side-by-side installation of different versions of Rational Integration Tester is not supported.

If such installations are performed then users should note that the multiple versions will share the same start-up splash screen cause confusion in the version numbering.

Help/About must be used to determine the correct version number.


After uninstalling Rational Integration Tester Agent, Rational Test Control Panel or Rational Integration Tester proxies on a computer running Microsoft Windows XP, some users have reported seeing the error “Problem with executing "C:\Program Files\IBM\RIT-AgentNonDefault\prunsrv.exe" in the Installation Manager log.

This problem has no functional impact; the product will still have correctly uninstalled.


If a performance test is configured to start a stub on Rational Test Control Panel and that stub is already running, another instance will be (correctly) started for the performance test.

However, when the performance test stops, both instances of the stub will be stopped, not just the one that was started for the test.

Note: This does not apply to stubs that are already running but which are not configured to be used in the performance test - they will continue to run after the test ends.


When a Rational Test Control Panel scenario is loaded into Rational Integration Tester (by means of either the Test Suite scenario editor or the Performance Test configuration dialog), scenarios for all domains / environment are listed rather than just the domain/environment the user is currently working in.

If the test is then executed in an environment in which the stubs in the scenario have not been published too they will fail to start.


Due to the way in which table names are extracted from SQL when using the new integrated database problems can occur when working with case-sensitive, non-schema qualified table names. Specifically if a user is working with

- a case-sensitive database

- and with a mixed-case table name

- and with SQL that does not use schema-qualified table name

- and that SQL that does not quote the table name

Then TABLE NOT FOUND errors may be reported when using the integrated database. The workarounds are to either change the SQL to be schema qualified or to use the non-integrated schema approach where a second database schema is required.


Some users have reported that the Message Difference Window is slower to open on the 8.5 release (compared to the release) on very large messages (typically 1 megabyte messages).


If a user has run a stub from a project on an Agent via Rational Test Control Panel, stopped that stub (but left the project deployed to the agent, that is, has not run other stubs on that Agent yet) and then publishes a new version of the stub from the same project number to Rational Test Control Panel and then immediately attempts to start that stub then a failure will occur.

This is because Rational Test Control Panel believes that the project already deployed to the Agent contains the new stub and instructs the Agent to start it without deploying the new version of the project file.

A workaround to this is to use the Stop All Stubs option on the Rational Test Control Panel dashboard which forces all projects to be cleared out from Agents.


Users should note that JDBC database virtualization is not supported against IBM DB2 version 8.x.

The oldest supported version of DB2 for JDBC virtualization is 9.5 (on distributed) and 9.1 (on System z).


If, when importing a .NET object into Rational Integration Tester’s Schema Library, a user chooses a file that is not a .NET assembly (for example, an XML file) then errors can occur.

These errors occur in Microsoft Windows native libraries and cannot be handled by Rational Integration Tester. In the 8.5 release, Rational Integration Tester does some additional checks before attempting to ask the native libraries to load the assembly to reduce the number of error conditions.

However, errors may still occur if a user attempts to load a file that is not a .NET object into Rational Integration Tester.


Rational Test Control Panel now has the ability to clone running stubs. This means that a second (or subsequent) copy of a stub can be started up on a new agent using exactly the same configuration as the existing stub.

This is useful when using stubs for Performance Tests as, for some transports, this allows round-robin allocation of messages to occur which will result in higher throughput than from a single stub.

If such a configuration (multiple copies of the same stub running on different agents) is saved as a scenario in Rational Test Control Panel then it will not load back correctly, not will it load into Rational Integration Tester (from the test suite editor, for example) correctly.


If a Rational Integration Test suite scenario has a reference to a (local) stub as ‘blank’ in the References grid (that is, not ‘Live System’ and not a specifically selected stub) and a stub is already running for the referenced operation then, when the test suite starts, the running stub will be stopped by Rational Integration Tester (thus reverting message to the live system).

This may cause user confusion as they had not explicitly configured the scenario for ‘live system’.

Note: This can be worked around by explicitly stating which stub should be used in the scenario editor.


Use of –clean argument when Rational Integration Tester or Library Manager will not start

Problems can sometimes occur when Rational Integration Tester does not properly resolve multiple versions of the same JAR file correctly.

Multiple versions may be present within an installation because third party JAR files may each include a different version.

If incorrect dependency information is stored within the Eclipse workspace cache then it will not correct itself. One common symptom of this problem is that when a user runs Rational Integration Tester, the splash screen appears, then disappears but Tester never starts.

The same issue can occur when running Library Manager, although in this case, as there is no splash screen, it will appear to the user as if Library Manager has just failed to start.

Although one workaround is to uninstall and re-install Rational Integration Tester it is possible for a user to force cached dependency information to be removed and re-evaluated and, in the majority of cases, the problem will then correct itself.

To force the Eclipse environment to delete dependency information GHTester.exe must be started from the command line with the -clean argument specified, that is, from within the installed directory:
GHTester.exe –clean on Windows and ./GHTester –clean on Linux.

Rational Integration Tester will take longer than usual to start when -clean is specified.

For Library Manager use:
LibConfig.exe –clean on Windows and ./LibConfig –clean on Linux.

The same problem can occur in RTVS and RPTS installations with the Rational Integration Tester Agent.

In this case diagnosis and remediation is more difficult as there are multiple executable files and the correct one must be used. In these cases IBM Support should be contacted.


Rational Integration Tester does not support native JMS implementation of IBM WebSphere Application Server if security has been enabled

Rational Integration Tester cannot currently access the JNDI of WebSphere Application Server (required for JMS) if security has been turned on.

IBM is currently investigation how to configure Rational Integration Tester such that this works and expects to issue a Technote after the problem has been resolved.


Slow Fail Execution Is Not Supported When Running ‘Now’ on a Remote Agent

GH Tester 5.4 introduced the concept of ‘slow fail’ to test suites.

When a suite is run with this option turned on tests will not immediately stop when an individual test action fails. Instead they will continue so that users can see if future test steps succeed.

Although this functionality is supported (in Rational Integration Tester 8.0.1) when scheduling a test for future execution via Rational Test Control Panel it is not supported if you run a test suite ‘now’ on a remote agent using the Run… dialog.


Using the Shutdown.bat file (or shortcut) will not stop Rational Test Control Panel running as a service

Startup and shutdown batch file scripts are provided with Rational Test Control Panel to start and stop it from the command line. On Microsoft Windows, shortcuts to these scripts are provided in the Start Menu.

Note: On Microsoft Windows, if Rational Test Control Panel is running as a service then the shutdown batch script cannot be used to stop it. You must either using the control panel or issue a net stop IBMRTCP statement on the command line.


Overwrite Expected Field for Filters

Within the Message Difference Window, Overwrite Expected Field only works for filters (within stubs) when updating leaf nodes. Message structures cannot be copied when viewing filter actions. The whole message can be replaced while viewing the filter actions, using overwrite expected message, but overwriting part of a message currently only works for the validate field action.

AIX Performance Testing Does Not Support the sysstat Probe
The sysstat probe is not provided for IBM AIX. If a user attempts to configure an AIX-based performance test to use this probe then the following error will be shown in the console :

[Error] Probe ERROR: localhost:4476 - Probes failed to start - Failed to start probe: System Statistics - java.lang.UnsatisfiedLinkError: ghsystemstats (Not found in java.library.path).

You must remove this probe from the configuration of the test.

Stopping an Agent Results In Windows Event Log Error
On some Microsoft Windows installations, IBM has seen errors raised in the Windows Application Event Log when the Rational Integration Tester Agent service is stopped.

This error occurs during the shut-down process of the service and does not affect the functionality of the Agent.

Component Tree Does Not Show Complete Project In Test Factory
Some users have reported instances where the Test Factory perspective does not show the complete list of project resources in the component tree. Rational Integration Tester has required re-starting to correctly display the tree.

This problem has not yet been replicated within IBM’s labs and its cause is currently unknown.


User Interface Freeze

Some users have encountered software freezes on Microsoft Windows, particularly when moving the Rational Integration Tester user interface from a laptop screen onto an external monitor. This is believed to be caused by problems between the Java Virtual Machine and the DirectX video drivers in use on the machine. If this problem affects you then please try to resolve it by adding the following line to the GHTester.ini file in the installation directory:


This tells the JVM not to use DirectX. This has resolved the problems in all cases IBM is aware of so far although the UI does run more slowly. This issue has been raised with the IBM Java team.

Note: Users who experienced this problem while using computers with NVIDIA graphics cards found that upgrading to the most recent driver for their graphics card resolved the problem.

GHDotNetUtils Must Be In the .NET Global Assembly Cache
If you are using Rational Integration Tester/.NET integration, the GHDotNetUtils.dll file (in the root installation folder) must be added to the .NET Global Assembly Cache before .NET objects can be parsed.

Users wishing to use the .Net functionality will need to install the .Net SDK from Microsoft and register the .dll manually, for example: gacutil /i GHDotNetUtils.dll

Date Formatting Strings
Rational Integration Tester uses Java to format date strings for validation purposes. The IBM JRE acts differently from the Oracle/Sun JRE used by earlier versions of GH Tester for one unusual format string.

Specifically, a date of "123" parsed using an input format of “yyy” with output format MMDDy will be formatted as “0101123” by the IBM JRE. Previous versions of GH Tester (using the Oracle JRE) would have formatted this as “010123”. This is unlikely to cause problems as it is unlikely customers will be using single-character year output format strings.

Launching the ‘Tools Application’ (Source Control option on Menu) Displays License Warning
If you are running Rational Integration Tester using an evaluation license then when you launch the “Tools Application”, by choosing the Source Control option in the menu or by creating/editing a data model, a dialog will appear warning that you are using a trial license.

This dialog will not appear once you have installed a full license.

Silent Install of Rational Test Control Panel
Depending on how the silent installation response file has been generated the “Security Configuration” tool may still be launched at the end of the process. The imcl tool is known to work correctly and will suppress the dialog.

As Rational Test Control Panel is a server-based product silent installations are not expected to be common but IBM will look to improve this in future releases.

To use imcl within the ${IM}/eclipse/tools directory run “./imcl-c”, specifying the response file when prompted.

The Agent Can Only be Started From its Installed Directory (Unix)
On Unix, if an attempt is made to start the agent from a directory other than the one it is installed in then it will fail to start. For example:

/opt/GH/RIT-Agent/Agent -consolelog

Whereas if you are within the installed directory then ./Agent -consolelog works correctly.

It is not possible to rename a project resource by simply changing case
Although project resources can be renamed, it is not possible to simply change the case, that is, a rename that changes “simpletest” to “SimpleTest” will not actually rename.

This is because Tester uses the Eclipse framework to manage its files and Eclipse does not recognize this type of change.

38005If a Rational Integration Tester project results database is created on MySQL on Linux, the MySQL system variable lower_case_table_names in the my.cnf file must be set to 1. On Linux systems, this is not the default setting.

37010When Rational Integration Tester is installed on Apple Mac systems running OS X 10.8.4, some users are still experiencing software hangs when running Rational Integration Tester or Library Manager.

The reason why the software hangs on some Mac systems and not on others is still being investigated.

36796In Recording Studio, the information window that displays details about warnings or errors that have occurred while recording truncates some information.

For example, recording rules used by the HTTP proxies will typically be truncated. This is by design. The full text can be see in the Rational Test Control Panel activity log.

37069When Rational Test Control Panel is started, a large number of JAX-RS warnings will be output to the stdout (console) output.

These will be of the form "WARNING: The class was already added to the JAX-RS runtime. The runtime is ignoring this value.

Check that this class was not returned in the subclass getSingletons() and getClasses() methods." These can be ignored because they do not indicate a problem.

Linux root/non-root installation notes

The 8.5 components can be installed on Linux as a non-root user. Alternatively, components can be installed as root and then run as non-root.

The Network Capture (pcap) component of Rational Integration Tester requires root access and cannot be installed as a non-root user.

Most Linux administrators will be aware of file/directory ownership issues when performing these types of installation. The following known issues should be considered.

31329All users must be in the same group to be able to run/view reports

When a report is generated in Results Gallery Tester will create a directory called /tmp/ghtester5reports.

This directory will be owned by the user that creates it (which may be root). When another user attempts to run a report then, if they’re not in the same group, they will be unable to write to the same directory and the report generation will fail.
The workaround is to ensure that all users can write to this directory (for example, by making them all members of the same group)

30778If Rational Test Control Panel is installed as root but run as non-root then it will fail

This is caused because directories used at runtime for logging information have been created by root and therefore cannot be written into by a non-root user.

This problem does not occur if Rational Test Control Panel was installed as a non-root user. If Rational Test Control Panel was installed as root and a user wishes to run it as non-root then directory permissions must be changed.

For example, from within the Rational Test Control Panel installation directory issue the commands:
  • chmod a+w logs
  • chmod a+w logs/*
  • chmod a+w /var/rtcp
  • chmod a+w /var/rtcp/*

Rational Test Control Panel should now run as a non-root user. An alternative solution that may be preferred by some administrators, is to change the directory that Rational Test Control Panel writes information into. A Technote has been published here describing how to do this:

Globalization issues


Rational Integration Tester is a Swing based Java application. Java/Swing uses visual cursor movement when working with bi-directional text in user-editable fields.

This means that the cursor arrow keys and the delete/backspace function will always operate visually (that is, left moves left) which may not be the expected logical movement.


Not all Unicode characters (especially the glyph-style characters) can be rendered using all fonts. For example, very few fonts contain a glyph for the U+0904 (DEVANAGARI LETTER SHORT A) character.

Rational Integration Tester’s default behavior means that it will not attempt to find a font that does contain that character. This means that messages containing this character will not render correctly.

The workaround is for the user to use the Rational Integration Tester font preferences to select a font that is capable of rendering these characters.


Dates in ISO format in message nodes will not be rendered according to the preferred operating system date format (when not running in English) in the Message Difference Window.

Changing this behavior would require making changes that could invalidate ‘expected messages’ in existing projects causing tests to fail. For this reason it has been decided not to change the rendering of these nodes.


Attempting to publish a message to an IBM WebSphere MQ Queue Manager using a character set that WebSphere MQ will not support will result in a failure.

This is as-expected and is not a Rational Integration Tester fault. For example, it is possible to publish a message containing the string 叱る亜うぃんをいはるいうはにぽげきんぼ if the character set on the publish action is set to 33722 but not if it’s set to 29626 because WebSphere MQ does not support that.


When attempting to install multiple products at the same time (for example, Rational Integration Tester and Rational Integration Tester Platform Pack) warning messages may be displayed in Installation Manager indicating that not all the products in the selected set provide the same set of languages.

Both Rational Integration Tester and Rational Test Control Panel have been translated into the same set of 14 languages and this warning can be ignored.


Attempting to connect to a DB2 database using non-ASCII user names may result in the error “cannot convert Unicode string to Ebcdic string” being displayed.

For example, attempting to connect using the default Russian administrator user name of "администратор" will show the error, but connecting using “administrator” will not. The workaround is to use the ASCII forms.


Arabic numbers pasted into a numeric control with up and down increment arrows (for example, the Minimum length field when setting up length validation in the message editor) will revert to Western numerals when the up/down increment arrows are clicked.


When running Library Manager on a non-English operating system the network card information displayed may contain corrupted characters.

This is due to a problem processing Unicode characters in third party software used by Library Manager to access the network card details.

GH Tester known issues that are still relevant to Rational Integration Tester

Test Cycles and Coverage Reports
If you are using Test Cycles and want coverage reports, the applicable tests must still be executed from within a test suite (that is, coverage reports will not be produced for tests that are executed outside of a test suite).

Column Level Validation Cannot be Displayed in the Message Differences Window
Validation on table rows and cells performed within the SQL Query action works as expected and is displayed in the console accurately.

If column-level validation is used, however, any differences are displayed correctly in the console, but they are unable to be displayed in the Message Differences window as it is currently only able to display row-by-row and cell-by-cell validation issues.

Duplicated Physical Resources when Using Source Control
Rational Integration Tester now uses a different method of creating file names for physical resources.

For this reason, source control users may see duplicate items due to the way the project was updated/committed after the resource change. In this case, the newer/newly named resource should be kept.

webMethods Broker Events
When recording webMethods Broker events, some fields may be seen to contain null rather than their actual content. This occurs because elements wired to a byte-array by an IS to publish can only be un-wired by another IS, this is an internal mechanism of IS and cannot be overcome.

This has been seen with the IBM WebSphere MQ adapter notifications for the “MsgBody” and “MsgBodyByteArray” fields, but may affect others. Further information can be found via Software AG support, incident number 5019024.

Logical View
Sometimes adding a service component to the logical view will not add it to the diagram.

10905: User Names Containing “#” Character
The Eclipse framework (and therefore Rational Integration Tester) does not support user names that contain the “#” symbol. This issue may result in the deletion of project files as Rational Integration Tester cannot interpret the full path to the user’s “Documents and Settings” directory for application preferences.

The workaround for this issue is to create a folder to use as a Rational Integration Tester workspace (for example,C:RIT) and edit TestEngine.ini (found in C:\Program Files\IBM\RationalIntegrationTester, by default) to point to it. The line below “-data” should be changed from “@user.home/.rit8/perf-workspace” to “C:/RIT/..rit8/perf-workspace”.

UNC Paths as Current Directory in Run Command Action
Cmd.exe, used by the Rational Integration Tester Run Command test action, may return an error when trying to process a UNC path. More information regarding the resolution is available at


Issue with SSL tab referencing one of a number of identity stores

In a project with multiple identity stores the GUI does not always correctly reflect the one selected.

If you select any identity store from the Identity Store drop down menu and click OK to close the transport window, Rational Integration Tester will select the correct identity store when processing the data. This can be seen when opening up the physical files in the Physical folder of the GH Project on your C drive. The HTTP file references the id of the selected Identity Store correctly.
Error scenario

If you select any identity store from the Identity Store drop down menu, but then reselect the Identity Store drop down menu it will not retain the selected id store and will default back to the first id store in the drop down menu. Clicking OK on the window will then rewrite the physical files on your drive to reference the first id store in the list. So this should be avoided until fixed.

Simultaneous Modifications
If a message is opened in a message editor (for example, a Subscribe action) and the message differences window at the same time, changes made in one window will be overwritten or reverted when closing the other window.

More specifically, the content of the window that is closed last will overwrite the content of the window that was closed first.

This also applies if the message differences window is used to correct messages used in a stub if the stub editor window is open.

Note: This problem can be avoided by selecting the user preference, “Run from Disk” as opposed to “Run from Memory”.

User Permissions on non-Windows Platforms
It is possible to perform actions in Rational Integration Tester that require the opening of IP ports less than number 1024.

For example, if you create and run a stub configured to listen on port 80.

On non-Microsoft Windows platforms this operation requires the user to be an administrator.

Before you can run Rational Integration Tester as an administrator, however, you must run the Library Manager as an administrator (this is due to the way the .rit8 directory is created under the user’s home directory).

Similarly, if you want to run Rational Integration Tester as a non-admin user, you must first run Library Manager as that non-admin user.

Results Rendering
The third party rendering engine has performance issues when dealing with larger reports, this may be alleviated by increasing the amount of memory allocated to the application.

Invalid Schema Messages
Some message fields may be displayed as invalid (red “x”), even though they are valid fields/messages.

If a newer version of Rational Integration Tester is installed after adding team providers to SCM, the providers will have to be reinstalled unless their installation is outside of the Rational Integration install folder (detailed in Rational Integration Tester Installation Guide).

TIBCO BusinessWorks Private Processes
The BusinessWorks private process transport uses HTTP as its primary communication method, but the “Publish” test action of Rational Integration Tester does not support HTTP. Therefore, the Send Request/Receive Reply action pair should be used for testing private processes.

Error schemas are not supported (for example, if a process outputs an error schema rather than an end schema, the error schema/output is not supported in Rational Integration Tester).

Rational Integration Tester does not support the following content in private process schemas:
  • A “Choice” content option at the root of the schema.
  • Pointing to an AE message from anywhere (that is, inner or at the root) causes a known deserialization issue.
  • The “Java Object Reference” type is not supported at any level.
  • The inline WSDL message content option is not supported.

If you get a connection error when calling a private process, please check the network settings.

If you open the Designer Engine Custom Properties in the Physical View of the Architecture School perspective, you will find the host and port number.

The host/port in the Physical View menu must match the host/port in the GHEnable.proj design time library in the BW project.

The BW host/port can be set when the project is deployed.

Data Transfer Objects (DTOs)
DTO support is currently limited to the following:
  • Classes with a default constructor and publicly visible member variables.
  • Member variables must be primitives, wrapper objects, Strings or other objects within the JAR file.

JMS providers who use the Context Class Loader to obtain message definitions.

Change History

What's new in this release:

53376 Rational Integration Tester no longer supports the SonicMQ transport. If a user loads a project that uses the SonicMQ transport into this version of Rational Integration Tester, the transports and operations will not appear in Architecture School, and tests and stubs that use the SonicMQ transport will fail to run. Users must replace the SonicMQ transport with the JMS transport configured to use SonicMQ. Customers who are affected by this change should contact IBM support before they upgrade.
53357 The version of Apache Tomcat that Rational Integration Tester uses has been upgraded from 7.0.27 to 7.0.62. This change resolves the security issues that are documented in the following bulletins:

Rational Test Control Panel component in Rational Test Workbench and Rational Test Virtualization Server affected by Apache Tomcat vulnerability (CVE-2014-0227)

Rational Test Control Panel component in Rational Test Workbench and Rational Test Virtualization Server affected by Apache Tomcat vulnerability (CVE-2014-0230)

53357 The password hashing in Rational Test Control Panel was changed from the MD5 message-digest algorithm to a secure alternative. Refer to the following bulletin for additional details about this security issue:

Rational Test Control Panel component in Rational Test Workbench and Rational Test Virtualization Server uses an insecure hashing scheme for handling user passwords (CVE-2015-1913)

Click the link in the Download Options column:

[{"DNLabel":"Rational Integration Tester 8.5 fixes","DNDate":"15 Jun 2015","DNLang":"English","DNSize":"580000000","DNPlat":{"label":"Windows","code":"PF033"},"DNURL":"","DNURL_FTP":" ","DDURL":null}]
[{"Product":{"code":"SSBLQQ","label":"IBM Rational Test Workbench"},"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Component":"Rational Integration Tester","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF016","label":"Linux"},{"code":"PF022","label":"OS X"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"","Edition":"","Line of Business":{"code":"LOB36","label":"IBM Automation"}}]

Problems (APARS) fixed

Document Information

Modified date:
20 July 2018