Preventive Service Planning
Abstract
This document lists the available patches for the Watson OpenScale on IBM Cloud Pak for Data service. Not all versions include patches. Only versions that include patches are shown.
Content
Use the following links to jump to the list of patches for each version of Watson OpenScale.
Watson OpenScale 3.5 patches
cpd-aiopenscale-3.5.1-patch-1
This patch applies only if you have installed IBM Watson OpenScale version 3.5.1.
Patch name |
cpd-aiopenscale-3.5.1-patch-1 |
Released on | 1 September 2021 |
Service assembly | aiopenscale |
Applies to service version | Watson OpenScale 3.5.1 |
Applies to platform version | Cloud Pak for Data 3.5.1 |
Patch type |
Additive
You must install Watson OpenScale 3.5.1 before you apply this patch.
|
Description |
This patch addresses some of the performance issues with monitor evaluations on wide data sets and huge volumes of data. After you install this patch, you can see an improvement in the time that it takes to generate an explanation and compute fairness and drift.
This patch applies to x86 systems and can be applied only by using the air-gapped clusters installation instructions. You cannot roll back this patch.
|
Instructions |
See Applying patches.
|
cpd-aiopenscale-3.5.0-patch-1
This patch applies only if you have installed IBM Watson OpenScale version 3.5.0.
Patch name |
cpd-aiopenscale-3.5.0-patch-1 |
Released on | 4 December 2020 |
Service assembly | aiopenscale |
Applies to service version | Watson OpenScale 3.5.0 |
Applies to platform version | Cloud Pak for Data 3.5.0 |
Patch type |
Additive
You must install Watson OpenScale 3.5.0 before you apply this patch.
|
Description |
This patch adds the ability to do batch processing of large datasets. After you install this patch you can configure Watson OpenScale to work in batch mode. You must have a custom machine learning provider and subscription and then you can configure an Apache Hive database and an Apache Spark analytics engine. The batch processor points to a source database and, working with the already-scored data, it computes and writes metrics to a target database. This means that millions of transactions can be processed without bringing the data into the datamart.
This patch applies to both x86 and POWER systems.
|
Instructions |
See Applying patches.
|
Watson OpenScale 3.0.1 patches
The following patches are available for IBM Watson OpenScale version 3.0.1.
wos-3.0.1.6
Patch name | wos-3.0.1.6 |
Released on | 30 April 2021 |
Service assembly | aiopenscale |
Applies to service version | Watson OpenScale 3.0.1 |
Applies to platform version | Cloud Pak for Data 3.0.1 |
Patch type |
Cumulative
|
Description |
This patch resolves the following issues:
This patch applies to both x86 and POWER systems.
|
Instructions |
See Applying patches.
|
wos-3.0.1.5
Patch name | wos-3.0.1.5 |
Released on | 28 January 2021 |
Service assembly | aiopenscale |
Applies to service version | Watson OpenScale 3.0.1 |
Applies to platform version | Cloud Pak for Data 3.0.1 |
Patch type |
Additive
You must install wos-3.0.1.4 before you apply this patch.
|
Description |
This patch resolves the following issues:
This patch applies to both x86 and POWER systems.
|
Instructions |
See Applying patches.
|
wos-3.0.1.4
Patch name | wos-3.0.1.4 |
Released on | 12 August 2020 |
Service assembly | aiopenscale |
Applies to service version | Watson OpenScale 3.0.1 |
Applies to platform version | Cloud Pak for Data 3.0.1 |
Patch type |
Additive
You must install wos-3.0.1.3 before you apply this patch.
|
Description |
This patch resolves the following issues:
This patch applies to x86 only (the issues don't exist on POWER).
|
Instructions |
See Applying patches.
|
wos-3.0.1.3
Patch name | wos-3.0.1.3 |
Released on | 10 August 2020 |
Service assembly | aiopenscale |
Applies to service version | Watson Openscale 3.0.1 |
Applies to platform version | Cloud Pak for Data 3.0.1 |
Patch type |
Additive
You must install wos-3.0.1.2 before you apply this patch.
|
Description |
This patch resolves the following issues:
This patch applies to x86 only (the issues don't exist on POWER).
|
Instructions |
See Applying patches.
|
wos-3.0.1.2
Patch name | wos-3.0.1.2 |
Released on | 20 July 2020 |
Service assembly | aiopenscale |
Applies to service version | Watson Openscale 3.0.1 |
Applies to platform version | Cloud Pak for Data 3.0.1 |
Patch type |
Additive
You must install wos-3.0.1.1 before you apply this patch.
|
Description |
This patch resolves the following issues:
This patch applies to both x86 and POWER systems.
|
Instructions |
See Applying patches.
|
wos-3.0.1.1
Patch name | wos-3.0.1.1 |
Released on | 30 June 2020 |
Service assembly | aiopenscale |
Applies to service version | Watson Openscale 3.0.1 |
Applies to platform version | Cloud Pak for Data 3.0.1 |
Patch type |
Cumulative
|
Description |
This patch resolves the following issues:
This patch applies to x86 only (the issues don't exist on POWER).
|
Instructions |
See Applying patches.
|
[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSHGYS","label":"IBM Cloud Pak for Data"},"ARM Category":[{"code":"a8m0z000000GpDZAA0","label":"Services and Integrations"}],"ARM Case Number":"","Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"All Version(s)","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Was this topic helpful?
Document Information
Modified date:
01 September 2021
UID
ibm15693744