PI47653: KO2Z662I OM00 V520 COMMON ROUTING TABLE TASK WAIT-PEINIT ISSUED MANY TIMES. HIGH CPU IN COLLECTOR.

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• High volume of messages
  05.40.49 STC20017 KO2Z662I OM00 V520 Common routing table task
  Wait-PEinit AUTOTIME=0005 ROUT=1892D000
  over a very short period. Message issued over 30 times with the
  same time stamp.
  
  Issue is caused by AUTODETECT=N in (OMPEMSTR) and no specific
  DB2 subsystems specified in (OMPEMSTS) by coding DB2SSID=dbid
  

Local fix

• Set AUTODETECT=Y in (OMPEMSTR) or specify a DB2 to monitor in
  (OMPEMSTS) via DB2SSID=dbid
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
  *                 users of component                           *
  *                 - OMEGAMON collector                         *
  ****************************************************************
  * PROBLEM DESCRIPTION: Collector loops issuing KO2Z662I        *
  *                      OM00 V520 COMMON ROUTING TABLE TASK     *
  *                      WAIT-PEINIT.  High CPU.                 *
  ****************************************************************
  * RECOMMENDATION: Check parameters for which DB2s are to be    *
  *                 monitored.  Apply this PTF.                  *
  ****************************************************************
  PROBLEM SUMMARY:
  When AUTODETECT=NO and no specific DB2s are to be monitored,
  the collector will repeatedly issue KO2Z662I messages and use
  a lot of CPU.
  
  PROBLEM CONCLUSION:
  Wait between issuing KO2Z662I messages and change the status
  in the message to indicate we're waiting for DB2s to monitor
  via a modify command:  F cccccccc,F PESERVER,S dddd
  
  KEYWORDS:
  HIGH CPU KO2Z662I AUTODETECT
  

Problem conclusion

• Wait between issuing KO2Z662I messages and change the status
  in the message to indicate we're waiting for DB2s to monitor
  via a modify command:  F cccccccc,F PESERVER,S dddd
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UI33337

Modules/Macros

• KO2ZROU
  

Fix information

• Fixed component name

  OM XE DB2PE/PM

• Fixed component ID

  5655OPE00

Applicable component levels

• R520 PSY UI33337

     UP15/12/01 P F511

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.