HC94397: PMG / BORING SPINDLE STOP : SPINDLE ROTATION ON NOT OUTPUTTED BETWEEN TWO POINTS.

APAR status

• Closed as program error.

Error description

• PMG / BORING SPINDLE STOP : SINPDL ROTATION ON NOT OUTPUTTED
  BETWEEN TWO POINTS.
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  SPINDLE ROTATION ON NOT OUTPUTTED BETWEEN TWO POINTS
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 10 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R9SP01.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R8SP05.
  
   INCIDENT DIAGNOSIS:
  SPINDLE ROTATION ON NOT OUTPUTTED BETWEEN TWO POINTS
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  For the machining of a boring spindle stop activity, we have
   to stop the spindle while machining a point.
  But the spindle was never switch on after the machining of the
  first point.
  So, the spindle was off when beginning to machine the other
  holes.
  
   ANSWER AND POSSIBLE BY-PASS:
  Now, the spindle is always swithed on after the machining of
   each point.(except the last point.)
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R508 PSN SP50805

     UP02/07/08 N 1000

• R509 PSN SP50901

     UP02/07/26 N 1000