HC91521: UNABLE TO SELECT A PART FOR CONSTRAINT AFTER SWITCHED TO DESIGN MODE FROM VIEW MODE

APAR status

• Closed as program error.

Error description

• WORKBENCH : ASSEMBLY
  
  FUNCTION : CONSTRAINT
  
  SCENARIO
  --------
  
  SPECIFY WORK WITH THE CACHE SYSTEM IN TOOLS / OPTIONS /
  INFRASTRUCTURE / PRODUCT STRUCTURE / CACHE MANAGEMENT
  
  SPECIFY AUTOMATIC SWITCH TO DESIGN MODE IN TOOLS / OPTIONS /
  MECHANICHAL DESIGN / ASSEMBLY DESIGN
  
  1. START CATIA
  2. OPEN A CATIA MODEL WHICH IS OPENED IN VIEW MODE
  3. SELECT INSERT / COINCIDENCE
  4. CLICK ON THE SURFACES TO SET THIS COINCIDENCE
  
                   EVEN IF PARTS HAVE BEEN SWITCHED TO DESIGN MODE
  
                   5. RETRY THE PHASES 3. AND 4.
  
                   THE SURFACES CAN NOT BE SELECTED
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
     ====>.Impossible to make a constraint on a specific
   CATProduct in visualisation mode.
   .
   TECHNICAL EXPLANATION FOR THE CORRECTION:
     ====>.The code has been enhanced
   .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 11 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R10SP01.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R507 PSN

     UP

• R508 PSN

     UP

• R509 PSN

     UP

• R510 PSN SP51001

     UP02/12/09 N 1000