HC91340: PMG / CONTOURING : GAP IN TRAJECTORY OR IN GUIDES IF THE PART IS IN A CATPRODUCT, NO GAP IF THE PART IS ALONE.

APAR status

• Closed as program error.

Error description

• PMG / CONTOURING : GAP IN TRAJECTORY OR IN GUIDES IF THE
  PART IS IN A CATPRODUCT, NO GAP IF THE PART IS ALONE.
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  PMG / CONTOURING : GAP IN TRAJECTORY OR IN GUIDES IF THE PART
  IS IN A CATPRODUCT, NO GAP IF THE PART IS ALONE.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 9 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R8SP04.
  
   INCIDENT DIAGNOSIS:
  PMG / CONTOURING : GAP IN TRAJECTORY OR IN GUIDES IF THE PART
  IS IN A CATPRODUCT, NO GAP IF THE PART IS ALONE.
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  Problem in transforming curves
  
   ANSWER AND POSSIBLE BY-PASS:
  select by bondary of faces
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R508 PSN SP50804

     UP02/05/24 N 1000