HC90889: CALLOUT NOT ASSOCIATIVE WHEN MOVING A HOLE WITH FILLET

APAR status

• Closed as program error.

Error description

• ABSTRACT:
  =========
   CALLOUT NOT ASSOCIATIVE WHEN MOVING A HOLE WITH FILLET
  
  SCENARIO:
  =========
  1. In Part Design create a Pad
  2. Create a hole with the option "up to next"
  3. Create a fillet on bothe edges of the hole
  4. Create a front view in a CATDrawing, so that you can see
  the hole
  as a circle.
  5. Create a section view by selecting one of the two circles
  (hole
  or boundary of the fillet).
  6. Go back to the CATPart, move the holeand update the Part.
  7. Update the CATDrawing
  Result: The section of the hole is OK, but the profile of
  the
  section is still on the old position.
  8. Back to the Part, deactivate the fillet
  9. Update the Drawing and create a new section by selecting
  the hole
  circle.
  10. in 3D, reactivate the fillet and move the hole.
  11. update the Drawing
  Result: The section is now associative!!
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  CALLOUT NOT ASSOCIATIVE WHEN MOVING A HOLE WITH FILLET.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 9 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R8SP3.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R508 PSN SP50803

     UP02/04/26 N 1000