HC90286: 3D WIRE : A LINE IS NOT DISPLAYED IN ACCORDANCE WITH THE RULE

APAR status

• Closed as unreproducible.

Error description

• SCENARIO:
  --------
  1. Open the provided CATPart file.
  >> Workbench is Generative Shape Design.
  2. Double click the Part1/Parameters/Boolean.1 in the
  tree.
  >> The Edit Parameter dialog box appears.
  3. Select false from the pull down list.
  4. Click OK.
  5. Double click the Part1/Parameters/Boolean.1 in the
  tree.
  6. Select true from the pull down list.
  7. Click OK.
  8. Repeat step 3,4,5,6,7.
  >> A line is not displayed in accordance with the rule.
  .
  Remark:
  It is displayed properly if you edit formula of the line.1
  (for example, input space the end of the formula)
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  A LINE IS NOT DISPLAYED IN ACCORDANCE WITH THE RULE
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION 5 RELEASE 7
  .
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
      CATIA VERSION 5 RELEASE 9 GA level AND ON V5R8SP02
  
   REASON:
  The problem which is reproduced on V5R8 GA is no longer
  reproduced since V5R8 SP02.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R507 PSN

     UP

• R508 PSN

     UP