HC84909: DMU KINEMATIC DOES NOT FREEZE AS REQUIRED.

APAR status

• Closed as program error.

Error description

• Abstract:
  EPMR: Position of kinematics is automatically reset
  .
  Operating System:  Solaris V2.7.0
  Product Group:  CATIA V5R6
  .
  Environment:
  SUN-Ultra 60
  .
  SCENARIO :
  1. Open sent Kinematik_Kurbeltrieb_Replay.CATProduct.
  2. In product tree open APPLICATIONS + REPLAY.
  3. Doubleclick to Replay.1.
  4. In Replay-panel click to button "Play Forward".
  5. Stop animation with button "Pause" after e.g. 5 sec.
  and close the panel.
  6. Result : The positions of the parts are turned back to
  the origin position.
  For product development and construction it's absolutely
  necessary to freeze the (collision) position when leaving
  the replay function.
  Notice :
  This is a jobstopper for the project chassis at
  Customer.
  
    For the V5R5 and V5R6 releases, this is the good behaviour of
  REPLAY.
  We have had a lot of Enhancement Requests to change that, so in
  V5R7,
  it'll be possible to quit the replay function, staying in the
  stop
  position. So this functionnality will only be available from
  V5R7.
    Thanks for your comprehention.
  please see customer's negative feedback above and kindly
  re-investigate.
  $$RSPMNT=PLW$$ <=
      I have done further investigations on the development side
  for this
  problem. It seems that some developers have made a
  missunderstanding
  between two developments in V5R7 (development of the track and
  the
  replay). So the exit in position has not been coded for the
  replay and
  is not planed to be made for the moment.
      I'm really really sorry to have given you a wrong
  information. If
  this development is important for you, you have to open an
  enhancement
  request.
  Please accept my excuses.
  Thanks for your comprehension.
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  DMU KINEMATIC DOES NOT FREEZE AS REQUIRED.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 8 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R7SP04.
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  The default behaviour has not changed, but a new check button
  (Keep position on exit) has appeared in the Kinematic
  Simulation window.
  If this button is checked, the position will be kept after
  clicking Ok.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V 5 SUN

• Fixed component ID

  569104000

Applicable component levels

• R506 PSN

     UP