HC84456: GENERATIVE SHAPE DESIGN. FILLET CAN'T BE MADE CORRECTLY.

APAR status

• Closed as program error.

Error description

• Workbench: GENERATIVE SHAPE DESIGN.
  .
  Abstract: FILLET CAN'T BE MADE CORRECTLY.
  .
  Scenario:
  .
  1. Click Edge fillet icon and sel an healing
  2. The check of "trim support" is removed.
  3. click ok.
  4. Edge Fillet can be made only on a part of the healing but not
  on all the edges of the Healing.
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
   The edge fillet cannot be made on all the edge of the Healing
   Just a part is created.
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
   problem on the NURBS of high degree.We have to analyse
   the NURBS for knowing if we have to improve quality or
   to do the edge fillet on the different edges.
  
   ANSWER AND POSSIBLE BY-PASS:
  This problem will be corrected on V5R7SP4 level.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 08 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R7SP4.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R507 PSN

     UP

• R508 PSN

     UP