HC84136: COPY/PASTE DRAW ELEMENTS FROM CATDRAWING TO CATPART CONTAINED IN CATPRODUCT LEADS TO ERROR MESSAGE

APAR status

• Closed as program error.

Error description

• WORKSHOP: SKETCHER
  FUNCTION: COPY/PASTE
  .
  SCENARIO FROM SCRATCH:
  ----------------------
  .
  1 - CREATE A NEW DRAWING
  2 - CREATE ANY GEOMETRY IN THE DRAWING (A LINE FOR INSTANCE)
  3 - CREATE A NEW CATPRODUCT AND INSERT A NEW PART IN IT
  4 - EDIT THE PART IN THE CONTEXT OF THE CATPRODUCT AND CREATE
      A SKETCH (ON XY PLANE FOR INSTANCE)
  5 - IN THE DRAWING COPY THE LINE CREATED AT STEP 2 AND PASTE IT
      INTO THE SKETCH
  RESULT: IT IS NOT ALLOWED TO PASTE ERROR MESSAGE IS RETURNED
  .
  BY-PASS:
  --------
  .
  WORKING OUT OF THE CONTEXT OF THE PRODUCT ALLOWS TO PASTE THE
  LINE IN THE SKETCH
  

Local fix

Problem summary

• COPY/PASTE DRAW ELEMENTS FROM CATDRAWING TO CATPART CONTAINED
  IN CATPRODUCT LEADS TO ERROR MESSAGE
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
  CATIA VERSION 5 RELEASE 12 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R11SP02
  .
  CLOSURE TYPE: PER
  -------------
  .
  There was a problem in the  UIActive object management in the
  specific case of this scenario.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN

     UP

• R510 PSN

     UP

• R511 PSN SP51102

     UP03/06/06 N 1000