HC82464: /LINKS COMMAND DISPLAYS NON-EXISTANT LINKS.

APAR status

• Closed as program error.

Error description

• ABSTRACT: /LINKS command displays non-existant LINKS.
  
  Cust is unable to eliminate links shown in display window when
  using /links command.
  No links are visible when cust uses Tools/Muli-Model Links/Manag
  Links.
  
  This model is completly self contained, the solid geometry and
  draw geometry is all on this model.
  The 3 models listed in the 'links' window do not belong there.
  There is no associative geometry in the draw views to the linked
  models.
  I had only this model open, performed update all under AUXVIEW2
  then File Saved.
  I performed /cln and got no errors.
  I performed /link and there are still 3 models in the link
  window.
  This is not a one shot affair, I have other models
  displaying links I neither want or need, but can't get rid of.
  

Local fix

Problem summary

• /LINKS COMMAND DISPLAYS NON-EXISTANT LINKS.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 4 RELEASE 2.4 REFRESH 4 GA level  (FREL424R4)
  
   INCIDENT DIAGNOSIS:
  /LINKS command displays non-existant links.
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  The relay cannot be deleted when link is deleted.
  
   ANSWER AND POSSIBLE BY-PASS:
  The useless relay is now deleted at part openning.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

  HC82461

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA FOR SUN

• Fixed component ID

  562640000

Applicable component levels

• RG22 PSN

     UP

• RH22 PSN

     UP

• R423 PSN

     UP

• RG23 PSN

     UP

• R424 PSN

     UP

• RG24 PSN

     UP

• RH24 PSN

     UP

• RI24 PSN

     UP