HC79865: SIDE OF BROKEN PROJECTED SPLINE CANNOT BE CHOOSEN.

APAR status

• Closed as suggestion for future release.

Error description

• Scenario :
  1 New CATPart
  2 Go onto Sketch (Ex.YZ Plane)
  3 Create Spline ==> Exit sketch
  4 Create Plane (Ex.Offset 20mm of YZ Plane)
  5 Create Sketch on step4's plane
  6 Project Spline(on step 3)
  7 Create line
  8 Split Spline by line
  ==> One projected Spline side is yellow and the other is white
  It should be possible to choose what spline part must be yellow
  (linked with projected element).
  
  Bypass: Break the spline before the projection.
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• THIS APAR IS CONSIDERED AS A SUGGESTION FOR IMPROVEMENT FOR
  CATIA.
  PLEASE CONTACT YOUR SUPPORT DEPARTMENT IN ORDER TO OPEN A
  REQUIREMENT FORM.
  
  This problem need a development to be taken into account
  It will be included in a future release.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels