HC77954: 3DWIRE : SAMPLE ERROR: UNABLE TO OPEN BLEND1.CATPART FROM THE DOCUMENT WHICH IS SUPPLIED BY DS'S SAMPLE

APAR status

• Closed as unreproducible in next release.

Error description

• Problem:
  Impossible to open the sample model Blend1.CATPart from the
  document with error message : "Can not open file
  ...B05doc/online/wfsug (or sdgug) /samples/Blend1.CATPart
  Wrong application level"
  .
  Model: ...B05doc/online/wfsug (or sdgug) /samples/Blend1.CATPart
  .
  Scenario:
  0. Start CATIA V5R5 or V5R6 or V5R7.
  1. Select File->Open
     ==> File Selection panel appears
  2. Select Blend1.CATPart document in sample directory
     The sample model is supplied by catia505SP3DOC(SP00563).
     ==> ...B05doc/online/wfsug (or sdgug)/samples/Blend1.CATPart
  3. Error message appears.
      ==> "Can not open file
    ...B05doc/online/wfsug (or sdgug) /samples/Blend1.CATPart
            Wrong application level"
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  UNABLE TO OPEN BLEND1.CATPART FROM THE DOCUMENT ON V5R5.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION 5 RELEASE 5
  .
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
      CATIA VERSION 5 RELEASE 7 GA level
  
   REASON:
  This is no problem on V5R7 level to read Blend1.CATPart.
  There is a probleme on V5R5 level : File/Open Blend1.CATPart
  leads to an error message : "Can not open file ..Blend1.CATPart,
  wrong application level"
  The file provided in the V5R5 documentation is a V5R6 file,
  that is why it is not readable.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R505 PSN

     UP

• R506 PSN

     UP