HC75271: PMG/TOOLS CATALOG: TOOL PARAMETERS IN "MORE" PANEL OF TOOL SELECTION PANEL NOT AUTOMATICALLY UPDATED

APAR status

• Closed as program error.

Error description

• When selecting cutting tools from a catalog, the More
  information fields are not automatically updated when coming
  back in the operation definition panel.
  .
  SCENARIO:
  1) Select the Drilling ICON (for instance) and then select the
  Manufacturing Program in the PPR
  6) Select the tool ICON
  7) Select the More ICON
  8) Select the "Select a tool with query" ICON
  9) Select the pull down arrow on the Look In field
  10) Select ToolsSample01
  11) Select OK to select the second Drilling tool
  RESULT: The second drilling tool is returned to the tool panel
  but the fields on the More side of the panel are not updated.
  .
  By-pass:
  If you further select the Less ICON, then select the More ICON,
  you will see that the tool panel is now updated with the correct
  values of the selected tool
  

Local fix

Problem summary

• PMG/TOOLS CATALOG: TOOL PARAMETERS IN MORE PANEL OF TOOL
  SELECTION PANEL NOT AUTOMATICALLY UPDATED.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 7 GA level.
  .
  When changing the tool on the MO (selection of new tool or
  changing tool type) then, the "more" panel is closed.
  When opening it again, the info presentation is correct for
  the new tool
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R505 PSN

     UP

• R506 PSN

     UP