HC62847: SWEEPT SURFACE CANNOT BE CREATED , PROFILE NOT ACCEPTED - WIREFRAME AND SURFACE DESIGN WORKBENCH

APAR status

• Closed as documentation error.

Error description

• SWEEPT SURFACE CANNOT BE CREATED , PROFILE NOT ACCEPTED -
  WIREFRAME AND SURFACE DESIGN.
  Multi-banch curves not accepted as profile for a sweep
  

Local fix

Problem summary

• Some profiles can not be used for sweep
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN CATIA DOCUMENTATION
  DELIVERED WITH CATIA VERSION 5 RELEASE 4
  
   DOCUMENTATION REFERENCE:
   MANUAL  ===> CATIA Generative Shape Design User's Guide
   CHAPTER ===> Basic Tasks
   CHAPTER ===> Creating Surfaces
   PAGE    ===> N/A
  
   MODIFICATION:
  In task: "Creating Swept Surfaces Using an Explicit
  Profile" the opening paragraph should read:
  
  "This task shows how to create swept surfaces that
   use an eplicit profile. These profiles must not be
   T- or H-shaped profiles."
  
  This modification will be reflected in next CATIA
  version (V5R4).
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels