HC40258: PDG : THICK SURFACE : CATIA CRASHES WITH CLICK OK TO TERMINATE MESSAGE DURING THICK SURFACE OPERATION

APAR status

• Closed as unreproducible in next release.

Error description

• PDG : THICK SURFACE : CATIA CRASHES WITH
  CLICK OK TO TERMINATE MESSAGE DURING
  THICK SURFACE OPERATION
  .
  1.Start CATIA.
  2.Open the attached CATPart.
  3.Select Thick Surface operator from PartDesign
  workbench.
  4.Set 0.67mm as the first offset.
  5.Select the surface PIECE_SURFACIQUE_FINALE
  as the input surface.
  6.Click OK.
  -CATIA crashes with Click OK to terminate
  message.
  .
  This is the problem.
  

Local fix

Problem summary

• PDG : THICK SURFACE : CATIA CRASHES WITH
  CLICK OK TO TERMINATE MESSAGE DURING
  THICK SURFACE OPERATION
  .
  1.Start CATIA.
  2.Open the attached CATPart.
  3.Select Thick Surface operator from PartDesign
  workbench.
  4.Set 0.67mm as the first offset.
  5.Select the surface PIECE_SURFACIQUE_FINALE
  as the input surface.
  6.Click OK.
  -CATIA crashes with Click OK to terminate
  message.
  .
  This is the problem.
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      Virtual Design VERSION V5R17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  Virtual Design VERSION V5R19 GA level
  Virtual Design VERSION V5R18 SP5.
  Additional Closure Information:
  THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE 19 GA LEVEL.
   AND ON V5R18SP05
  Additional Closure Information:
  Incident Diagnosis
  THICK SURFACE : CATIA CRASHES WITH CLICK
  OK TO TERMINATE MESSAGE DURING THICK
  SURFACE OPERATION
  .
  Reason
  The Thick Surface operation is
  succesfuly completed without any problem
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  HC40260 HC40261 HC40263

Fix information

• Fixed component name

  CATIA FOR SGI

• Fixed component ID

  562630000

Applicable component levels

• RG20 PSN

     UP