HD26982: VPM : ONLY ON AIX: CATIA + FILE + EXIT LOCKS UP AFTER A CATIA + MODELS + MODIFY SAVED IN THE VPM PSNGRAPH

APAR status

• Closed as program error.

Error description

• 1-On VPM, Create&Save Parts & Models as follow:
  |-- Part-B ---- Model-B
  Part-A ----|
  |-- Part-C ---- Model-C
  2-Open the PSN by double click Part-A
  3-Sel Model-B & Model-C and load to CV4
  4-On the PSN, click MB3 on Part-A, sel Current
  part -> Set current
  5-On the CV4, FK MODELS / MODIFY / Translate ,
  and sel one of the geometry
  --- Selected geometry is highlighted.
  6-Translate the selected model
  7-Switch to VPM PSNGraph and save the PSNGRaph
  8-Switch to CATIA + File + Exit: Catia will lock up.
  The process needs to be killed.
  

Local fix

Problem summary

• VPMINTEROP : ONLY ON AIX: CATIA + FILE + EXIT LOCKS UP
  1-On VPM, Create&Save Parts & Models as follow:
  |-- Part-B ---- Model-B
  Part-A ----|
  |-- Part-C ---- Model-C
  2-Open the PSN by double click Part-A
  3-Sel Model-B & Model-C and load to CV4
  4-On the PSN, click MB3 on Part-A, sel Current
  part -> Set current
  5-On the CV4, FK MODELS / MODIFY / Translate ,
  and sel one of the geometry
  ---> Selected geometry is highlighted.
  6-Translate the selected model
  7-Switch to VPM PSNGraph and save the PSNGRaph
  8-Switch to CATIA + File + Exit: Catia will lock up.
  The process needs to be killed.
  s
  
  
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  424 REFRESH 4 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON CATIA 424-REFRESH2 with PTF.
  .
  Same problem than HD19882 corrected on CATIA
  424 REFRESH1
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

  HD26979

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA FOR SGI

• Fixed component ID

  562630000

Applicable component levels

• RH24 PSY

     UP

• RI24 PSY

     UP