HD19355: SHAPE DESIGN : IF "EXTRAPOLATE" IS PERFORMED, CATIA BECOMES ABE ND

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario :
  Start CATIA
  1. File open the provided CUST5131.CATPart file
  2. Change Workbench to "GSD".
  3. Click "Extrapolate" icon.
  => "Extrapolate Definition" panel is displayed.
  4. The definition of "Extrapolate Definition" is
  performed as follows.
  Boundary:
  Select Internal edge in "Sweep.1".
  <>
  Extrapolated:
  Select "Sweep.1".
  ===> CATIA become ABEND.
  It is a problem.
  .
  Result to Expect:
  CATIA should not ABEND by "Extrapolate".
  .
  .
  

Local fix

Problem summary

• Shape Design : if "Extrapolate" is performed, CATIA becomes ABE
  ND
  Scenario :
  Start CATIA
  1. File open the provided CUST5131.CATPart file
  2. Change Workbench to "GSD".
  3. Click "Extrapolate" icon.
  => "Extrapolate Definition" panel is displayed.
  4. The definition of "Extrapolate Definition" is
  performed as follows.
  Boundary:
  Select Internal edge in "Sweep.1".
  <>
  Extrapolated:
  Select "Sweep.1".
  ===> CATIA become ABEND.
  It is a problem.
  .
  Result to Expect:
  CATIA should not ABEND by "Extrapolate".
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 12.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 14 GA level AND ON
  V5R13SP03 AND ON V512SP06
  .
  Incident Diagnosis
  If the Extrapolate operation is performed, CATIA
  falls in an abend or a core dump
  .
  Reason
  The problem is reproduced on R12 SP2 Hot Fix 20
  but it is no more reproduced on R12 SP6, R13 GA,
  R13 SP3 and R14 GA today.
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN SP51206

     UP04/03/31 I 1000

• R513 PSN SP51303

     UP04/05/07 I 1000