HD18807: UNDO/REDO HISTORY LOST

APAR status

• Closed as program error.

Error description

• Undo/Redo history lost
  .
  SENARIO:
  - Start CATIA, then open the provided Part
  - Run the CAA command. then press "2D" button.
  >You can see the representive changed to 2D
  - Run "Undo" command, the representive changed
  back to 3D
  - Run "Redo" command, the representive changed
  to 2D.
  --> But this time the history of Undo/Redo is lost.
  You can't do it any more!
  .
  

Local fix

Problem summary

• Undo/Redo history lost
  Undo/Redo history lost
  .
  SENARIO:
  - Start CATIA, then open the provided Part
  - Run the CAA command. then press "2D" button.
  >You can see the representive changed to 2D
  - Run "Undo" command, the representive changed
  back to 3D
  - Run "Redo" command, the representive changed
  to 2D.
  --> But this time the history of Undo/Redo is lost.
  You can't do it any more!
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 14 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R13SP04.
  .
  Incident Diagnosis:
  Undo/Redo history lost.
  .
  Correction Explanation:
  A CATModifyShowAttribut notification sent during
  the UNDO to refresh the visualization didn't have
  the correct arguments.
  .
  Answer and By-Pass:
  None.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R513 PSN SP51304

     UP04/06/04 I 1000