HD16942: A0 FORMAT PAPER CANNOT BE CHOOSEN IF USING A1 ROLL IN PLM P RINTER

APAR status

• Closed as program error.

Error description

• A0 format paper cannot be choosen if using A1 roll
  in PLM printer
  Scenario:
  Following printer has been added:
  - 3D PLM Printer (Printer language HPGL)
  real Printer: roll with 840 mm width.
  .
  Selecting at this printer the roll A0, only a roll width
  of 1189 mm will be displayed.
  Selecting the roll A1 (840 mm width), the paper
  format A0 cannot be selected.
  But that's a bug, since it's possible to print out an
  A0 format on a A1 roll.
  .
  

Local fix

Problem summary

• A0 format paper cannot be choosen if using A1 roll in PLM     p
  rinter
  A0 format paper cannot be choosen if using A1 roll
  in PLM printer
  Scenario:
  Following printer has been added:
  - 3D PLM Printer (Printer language HPGL)
  real Printer: roll with 840 mm width.
  .
  Selecting at this printer the roll A0, only a roll width
  of 1189 mm will be displayed.
  Selecting the roll A1 (840 mm width), the paper
  format A0 cannot be selected.
  But that's a bug, since it's possible to print out an
  A0 format on a A1 roll.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 14 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R13SP02 AND V5R12SP06.
  Incident Diagnosis
  A0 format paper cannot be choosen if using A1 roll
  in PLM printer.
  Correction Explanation
  The definition of A1Roll paper was 840*INF instead
  of 841*INF
  By-Pass
  Use a USER format
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN SP51206

     UP04/03/31 I 1000

• R513 PSN

     UP