HD16659: ASSYDSGN : IMPOSSIBLE TO COPY / PASTE A DXF IN A PRODUCT.

APAR status

• Closed as documentation error.

Error description

• Abstract: ASSYDSGN : IMPOSSIBLE TO COPY /
  PASTE A DXF IN A PRODUCT.
  Description:
  1) Open Drawing1.DXF.
  2) Create a new product.
  3) Insert a new part in the product.
  3) Select the part.
  4) In the drawing , select all the geometry.
  5) Copy it.
  6) And in Product1/Part1, try to paste the DXF.
  An error message appears:"Impossible to paste".
  7) Close the product and create a new part.
  8) Copy the DXF and paste it in the newly created
  part.
  .
  Result: The DXF is pasted successfully in the sketch.
  .
  

Local fix

Problem summary

• ASSYDSGN : IMPOSSIBLE TO COPY / PASTE A DXF IN A PRODUCT.
  Abstract: ASSYDSGN : IMPOSSIBLE TO COPY /
  PASTE A DXF IN A PRODUCT.
  Description:
  1) Open Drawing1.DXF.
  2) Create a new product.
  3) Insert a new part in the product.
  3) Select the part.
  4) In the drawing , select all the geometry.
  5) Copy it.
  6) And in Product1/Part1, try to paste the DXF.
  An error message appears:"Impossible to paste".
  7) Close the product and create a new part.
  8) Copy the DXF and paste it in the newly created
  part.
  .
  Result: The DXF is pasted successfully in the sketch.
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN CATIA
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 14.
  .
  This closed as Doc and the explanation is as
  follows:
  Documentation Reference:
  Interactive Drafting
  Basic Tasks
  Copying and Pasting Elements
  .
  MODIFICATION:
  Drafting elements cannot be pasted to a part or to
  a sketch. They can only be pasted within a drawing.
  .
  Regards,
  Arun VARDHAN.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels