HD14358: 3D CONSTRAINTS IN PART DESIGN NOT WORKING PROPERLY

APAR status

• Closed as program error.

Error description

• 3D Constraints in Part Design not working properly
  1. Open the part file.
  2. Open Sketch.2 and observe that it is fully
  constrained.
  3. Right click on Sketch.2, select Sketch.2 object >
  Change sketch
  support and observe that the sketch's origin is
  fixed to the part's
  origin(The sketch's VH axes is fixed to the part's
  XYZ planes).
  4. Edit the 3D 80mm dimension in the part and
  change to 200mm.
  >>> The Sketch.2 (and Pad.2) moves!!! The
  sketch's origin is no longer
  fixed to the part's origin! Right click on Sketch.2,
  select Sketch.2
  object > Change sketch support and observe that
  the sketch's VH axes
  still appears to be fixed to the part's origin. Now
  open the sketch
  and you can see that the VH axis has actually
  shifted to a new
  position! However the sketches constraints still
  appear in the same
  position as they were created, as if the sketch has
  not moved!
  
  
  
  
  
  .
  

Local fix

Problem summary

• 3D Constraints in Part Design not working properly
  3D Constraints in Part Design not working properly
  1. Open the part file.
  2. Open Sketch.2 and observe that it is fully
  constrained.
  3. Right click on Sketch.2, select Sketch.2 object >
  Change sketch
  support and observe that the sketch's origin is
  fixed to the part's
  origin(The sketch's VH axes is fixed to the part's
  XYZ planes).
  4. Edit the 3D 80mm dimension in the part and
  change to 200mm.
  >>> The Sketch.2 (and Pad.2) moves!!! The
  sketch's origin is no longer
  fixed to the part's origin! Right click on Sketch.2,
  select Sketch.2
  object > Change sketch support and observe that
  the sketch's VH axes
  still appears to be fixed to the part's origin. Now
  open the sketch
  and you can see that the VH axis has actually
  shifted to a new
  position! However the sketches constraints still
  appear in the same
  position as they were created, as if the sketch has
  not moved!
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 14 GA level.
  Incident Diagnosis :
  Capability to move a Sketch Positioning with a 3D
  constraint.
  Correction Explanation :
  We did the same treatment for Sliding Sketch and
  positioning Sketch.
  Now, we forbid to move a positioning Sketch.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R514 PSN

     UP