HD13923: WHEN USING "WORK WITH THE CACHE SYSTEM", A MODEL IS CHANGE TO "DESIGN MODE" THEN STATUS OF THE FILE IS "MODIFIED"

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  
  1. Set Tool/Option/Infrastructure/Product
  Structure/ Cache Management tab
  2. Work with the cache system On.
  3. Restart CATIA again.
  4. Create new product
  4. Using MB3 button, select components, new part
  (part1).
  5. Create new part again, then part2 is defined.
  6. Create sketch in each part, in Part Design WB.
  7. Exit skecher, and activate sketch in part2.
  8. Select File, Save Management, save product
  using Save as.
  9. Close the file.
  10.Open the file.(It is opend in state of visualization
  Mode)
  11.Set representation, Design Mode using MB3.
  12.Select File/ Save Management.
  Resutl:
  Then status of Product file is 'Modified' on the
  opened window.
  If Work with the cache system is off, the status
  is 'Open'
  
  
  
  .
  

Local fix

Problem summary

• When Using "Work with the cache system", a model is change   to
   "Design Mode" Then status of the file is "Modified"
  Scenario:
  
  1. Set Tool/Option/Infrastructure/Product
  Structure/ Cache Management tab
  2. Work with the cache system On.
  3. Restart CATIA again.
  4. Create new product
  4. Using MB3 button, select components, new part
  (part1).
  5. Create new part again, then part2 is defined.
  6. Create sketch in each part, in Part Design WB.
  7. Exit skecher, and activate sketch in part2.
  8. Select File, Save Management, save product
  using Save as.
  9. Close the file.
  10.Open the file.(It is opend in state of visualization
  Mode)
  11.Set representation, Design Mode using MB3.
  12.Select File/ Save Management.
  Resutl:
  Then status of Product file is 'Modified' on the
  opened window.
  If Work with the cache system is off, the status
  is 'Open'
  
  
  
  .
  

Problem conclusion

Temporary fix

Comments

• Hello Level 1,
  The problem was fixed on V5R13 GA but have correction on lower
  level will lead to strongly impacted development.
  Hope it will help.
  Best regards,
  Vincent BADIE
  .
  THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 11.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 13 GA level.
  
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R511 PSN

     UP

• R512 PSN

     UP

• R513 PSN

     UP