HD12757: ANALYSIS RESULTS CANONT BE SAVED TWICE IN DLNAME ENV

APAR status

• Closed as program error.

Error description

• -DLName : Create a DLName Project1, pointing to
  any local folder
  -Data preparation: Copy the following files into the
  folder used above
  DLName.CATAnalysis
  DLName.CATAnalysis
  Results Sample.CATPart
  Create a local temporary (CATTemp) folder.
  .
  1. Load DLName.CATAnalysis from Project 1.
  2. Select the Clear Storage icon.
  3. Select the radio button as in the diagram and
  press OK.
  =>Remove the analysis results.
  Check that the results have been removed
  from Links Manager.1 in the tree.
  Redefine the analysis conditions.
  .
  4. Double click "Pressure.1" from the tree.
  =>Change the pressure value.
  5. Select Save from the menu bar file menu to
  overwrite save the
  analysis file.
  Change the location of each temporary file to the
  local C:CATTemp
  6. Select the Storage Location icon.
  =>Set the Result Data and Computation Data save
  locations as below.
  7. Select the Temporary Data Directory icon.
  =>Set the Temporary Data save location as below.
  8. Select the Listing icon.
  =>Set the save location for Elfini Listing as below.
  9. Select the compute icon to carry out the
  analysis.
  10. Check that Clear Computation Data is selected
  and click OK.
  =>Calculation data file is removed.
  First save of CATAnalysisResults file
  .
  11. Select Save As from the menu bar file menu.
  =>Save DLName.CATAnalysisResults as shown
  below.
  12. Shutdown then restart CATIA.
  13. Once again, load DLName.CATAnalysis from
  Project.1.
  .
  At this point, repeat the operations in steps 2-10
  above.
  .
                14. Select Save As from the file menu.
                =>Using DLName, when trying to save
                DLName.CATAnalysisResults as shown
                below an error occurs.
                .
                Additional Information-1
                When the analysis results were deleted at Step3, i
  t             could be seen from
  
  the tree that they were removed.
  At Step11, the first saving of the file, only one local
  DLName
  .CATAnalysisResults is shown in the Save
  Management window.
  Since the analysis results in the DLName folder
  were removed at step 3,
  this is obviously expected.
  Additional Information-2
  The second time through the operations in steps 2B-
  8, at step 3 it is
  again possible to confirm from the tree that the
  analysis results have
  been removed.
  .
  Bearing the above in mind, When you look at the
  save management window
  at step 14 (second save of the results file):-
  Despite removing the analysis results
  (DLName.CATAnalysisResults)
  from Project1, that file is displayed in the save
  management window as
  if it still existed.
  Then, when attempting to save with the same
  name (DLName
  .CATAnalysisResults ), an error occurs.
  Additional Information-3
  In Additional Information-2 above, the analysis
  results file (DLName
  .CATAnalysisResults) was displayed in the save
  management window, but
  on checking the folder pointed to by Project.1 it can
  be seen that the
  file does not actually exist.
  .
  In a DLName environment, overwrite save should
  be possible any number
  of times.
  
  .
  

Local fix

Problem summary

• Analysis results canont be saved twice in DLname env
  -DLName : Create a DLName Project1, pointing to
  any local folder
  -Data preparation: Copy the following files into the
  folder used above
  DLName.CATAnalysis
  DLName.CATAnalysis
  Results Sample.CATPart
  Create a local temporary (CATTemp) folder.
  .
  1. Load DLName.CATAnalysis from Project 1.
  2. Select the Clear Storage icon.
  3. Select the radio button as in the diagram and
  press OK.
  =>Remove the analysis results.
  Check that the results have been removed
  from Links Manager.1 in the tree.
  Redefine the analysis conditions.
  .
  4. Double click "Pressure.1" from the tree.
  =>Change the pressure value.
  5. Select Save from the menu bar file menu to
  overwrite save the
  analysis file.
  Change the location of each temporary file to the
  local C:CATTemp
  6. Select the Storage Location icon.
  =>Set the Result Data and Computation Data save
  locations as below.
  7. Select the Temporary Data Directory icon.
  =>Set the Temporary Data save location as below.
  8. Select the Listing icon.
  =>Set the save location for Elfini Listing as below.
  9. Select the compute icon to carry out the
  analysis.
  10. Check that Clear Computation Data is selected
  and click OK.
  =>Calculation data file is removed.
  First save of CATAnalysisResults file
  .
  11. Select Save As from the menu bar file menu.
  =>Save DLName.CATAnalysisResults as shown
  below.
  12. Shutdown then restart CATIA.
  13. Once again, load DLName.CATAnalysis from
  Project.1.
  .
  At this point, repeat the operations in steps 2-10
  above.
  .
  Second save of CATAnalysisResults file
  .
  14. Select Save As from the file menu.
  =>Using DLName, when trying to save
  DLName.CATAnalysisResults as shown
  below an error occurs.
  .
  Additional Information-1
  When the analysis results were deleted at Step3, it
  could be seen from
  the tree that they were removed.
  At Step11, the first saving of the file, only one local
  DLName
  .CATAnalysisResults is shown in the Save
  Management window.
  Since the analysis results in the DLName folder
  were removed at step 3,
  this is obviously expected.
  Additional Information-2
  The second time through the operations in steps 2B-
  8, at step 3 it is
  again possible to confirm from the tree that the
  analysis results have
  been removed.
  .
  Bearing the above in mind, When you look at the
  save management window
  at step 14 (second save of the results file):-
  Despite removing the analysis results
  (DLName.CATAnalysisResults)
  from Project1, that file is displayed in the save
  management window as
  if it still existed.
  Then, when attempting to save with the same
  name (DLName
  .CATAnalysisResults ), an error occurs.
  Additional Information-3
  In Additional Information-2 above, the analysis
  results file (DLName
  .CATAnalysisResults) was displayed in the save
  management window, but
  on checking the folder pointed to by Project.1 it can
  be seen that the
  file does not actually exist.
  .
  In a DLName environment, overwrite save should
  be possible any number
  of times.
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 13 GA lev
  el.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R12SP04.
  
  Incident Diagnosis
  Cannot save twice in DLName env
  
  
  Correction Explanation
  Pathes comparison not taking DLNames into account
  
  
  Answer and By-Pass
  Code correction
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN SP51204

     UP03/12/18 I 1000

• R513 PSN

     UP