HD12120: WHEN "FORMULA" GO INTO "MULTIOUTPUT",CATIA IS ABEND

APAR status

• Closed as program error.

Error description

• POINT OF THIS PROBLEM
  
  "Formula" should be able to be in line
  with "MultiOutput". But in this case,CATIA is ABEND
  when "Formula" is defined.
  
  PROCESS FOR REPRODUCTION.
  
  2. Open the CATPart file.
  
  3. Click "Translate" icon.
  >>"Translate Definition" window appears.
  
   4. Define in thewindow.
    a) Select "Line.2" and "Line.3" as "Element".
    b) Select "Line.1"as "Direction".
    c) Define "Formula" as "Distance"
    (1) Select "Edit formula" by MB3 on area
  of "Distance".
  >>"Relation location" window appears. The
  message is as follows.
  ---------------------------------------------
  
      Would you like the relation to be
      appened into the selected shape
      body?
  ---------------------------------------------
  
    (2) Click "(Y)" in the window.
  >>"Formula Editor" window appears.
    (3) Set as follows in the window.
  "Translate\Length"=length('Shape
  Body.1\Line.1')
    (4) Click OK in the window.
  >>"A check on data will be launched on active
  document" window appears.
  
  Message is "Command interrupted".
    >>This means "CATIA is ABEND".
    >>>This is problem.
  .
  
  EXPECTED RESULT
   "CATIA isn't ABEND" and "Formula" should be
  created before Multi Output.1(Translate).
  
  
  
           .
  

Local fix

Problem summary

• GSD : When "Formula" go into "MultiOutput",CATIA is ABEND
  
  POINT OF THIS PROBLEM
  
  "Formula" should be able to be in line
  with "MultiOutput". But in this case,CATIA is ABEND
  when "Formula" is defined.
  
  PROCESS FOR REPRODUCTION.
  
  1. Start CATIA
  
  2. Open the CATPart file.
  
  3. Click "Translate" icon.
  >>"Translate Definition" window appears.
  
   4. Define in thewindow.
    a) Select "Line.2" and "Line.3" as "Element".
    b) Select "Line.1"as "Direction".
    c) Define "Formula" as "Distance"
    (1) Select "Edit formula" by MB3 on area
  of "Distance".
  >>"Relation location" window appears. The
  message is as follows.
  ---------------------------------------------
  
      Would you like the relation to be
      appened into the selected shape
      body?
  ---------------------------------------------
  
    (2) Click "(Y)" in the window.
  >>"Formula Editor" window appears.
    (3) Set as follows in the window.
  "Translate\Length"=length('Shape
  Body.1\Line.1')
    (4) Click OK in the window.
  >>"A check on data will be launched on active
  document" window appears.
  
  Message is "Command interrupted".
    >>This means "CATIA is ABEND".
    >>>This is problem.
  .
  
  EXPECTED RESULT
   "CATIA isn't ABEND" and "Formula" should be
  created before Multi Output.1(Translate).
  
  
  
  
  
  
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 13 GA lev
  el.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R12SP03.
  .
  Incident Diagnosis
  When Formula go into MultiOutput ,CATIA is ABEND.
  .
  Correction Explanation
  Formula is agregated under the multioutput and so
  the list of children is increased which leads to a
  crash...
  .
  Answer and By-Pass
  None.
  .
  Best Regards.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN SP51203

     UP03/11/18 I 1000