HD11693: SKETCHER / CANNOT COPY / PASTE ELEMENTS FROM A DRAWING FILE TO A SKETCH IN AN OPENBODY.

APAR status

• Closed as unreproducible in next release.

Error description

• -*OHSAKI, TOMOKO       -           -L223/JPEPLM-
  P3S3-03/09/19-09:09 -CE
  Received e-mail from Mr. Furiki. Have informed
  him PMR No via ack-mail.
   -*KAWAGISHI, RYOTA     -           -L223/-------
  P3S3-03/09/19-09:19 -AL
   -*KAWAGISHI, RYOTA     -569151000  -
  L223/JPEPLM-P3S3-03/09/19-13:23 -CR
   S5> SERVICE GIVEN= 99
  SG/99/
   S6> SERVICE GIVEN= 99
  SG/99/
  Hello
  DS,
  
  Could you please investigate our
  problem ?
  .
  
  Prob:
  
  CATIA can not copy from a drawing to a
  sketcher
      in Open_Body
  directly.
  Env: CATIAV5R10
  SP5
  .
  
  t/Mechanical Design/Drawing", Open               a new drawing.
                                                   2. Create a geo
  metry figure .(e.g. a                            rectangle )
                                                   3. Select the f
  igure, and copy                                  it.
                                                   4. Select "Star
  t/Shape/Generate Shape
  Design",Open a new Part.
  5. Create a any
  plane.
  6. Enter in a sketcher of any plane in
  Open_Body.
  7. Paste there. but put
  nothing.
  .
  
  Additional
  information:
  When pasting in a sketcher of
  PartBody,
  the figure is put
  normally.
  The pasted sketcher can move to
  Open_Body.
  .
  
  Thank you for your support. Best
  regards.
  Ryota Kawagishi
  03/09/19
  
  
  
  
  
  
  
  
  
  
  
  
  .
  

Local fix

Problem summary

• SKETCHER / CANNOT COPY / PASTE ELEMENTS FROM A DRAWING FILE TO
  A SKETCH IN AN OPENBODY.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  .
  
  Scenario:
  
  
  1. Select "Start/Mechanical Design/Drawing", Open
  a new drawing.
  2. Create a geometry figure .(e.g. a
  rectangle )
  3. Select the figure, and copy
  it.
  4. Select "Start/Shape/Generate Shape
  Design",Open a new Part.
  5. Create a any
  plane.
  6. Enter in a sketcher of any plane in
  Open_Body.
  7. Paste there. but put
  nothing.
  .
  
  Additional
  information:
  When pasting in a sketcher of
  PartBody,
  the figure is put
  normally.
  The pasted sketcher can move to
  Open_Body.
  .
  
  Thank you for your support. Best
  regards.
  Ryota Kawagishi
  03/09/19
  
  
  
  
  
  
  
  
  
  
  
  
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 10.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 13 GA level AND ON V5R12SP02 AND ON
  V5R11SP06
  
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51106

     UP03/10/23 I 1000

• R512 PSN SP51202

     UP03/10/16 N 1000