HD11561: DMUSEARC : DMU ZONE FILTER SEARCH WORKS ONLY ONCE PER ENOVIA SE SSION

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  1. Create
  product
  2. Configure
  product
  3. Create
  Action
  4. Associate Configured product to Action, with
  Modification
  5. Send the Product to Product Editor with
  Action.
  6. Select the Product name in product
  editor
  7. SendTo Zone Editor from context
  menu.
  8. Select Product name in Zone
  Editor
  9. Select Add-a-Zone from context
  menu
  10. Assign Zone an ID:
  Left
  11. Assign coordinate
  limits:
  a. -1000 < X <
  0
  b. -1000 < Y <
  1000
  c. -1000 < Z <
  1000
  12. OK, save zone
  Left
  13. Select Add-a-Zone from context
  menu
  14. Assign Zone an ID:
  Right
  15. Assign coordinate
  limits:
  a. 0 < X <
  1000
  1000
  16. OK, save zone
  Right
  17. Select save icon and then close Zone
  Editor.
  18. From Product Editor, use context menu to send
  product to CATIA V5
  as
  Assembly.
  
  19. In Catia V5, create new part named Part
  Left
  20. Create new part named Part
  Right
  21. In Part Left, create a sketch on the XY plane
  entirely left of the
  V axis.
  
  22. Create a pad from the sketch in Part
  Left.
  23. In Part Right, create a sketch on the XY plane
  entirely right of
  the V
  axis.
  
  24. Create a pad from the sketch in Part
  Right.
  25. Save product and parts to Enovia, immediate
  commit.  Close Catia.
  26. In Product Editor, select Part Left, and Part
  Right, and copy from
  the context
  menu
  27. Select the Product and paste copies of Part Left
  and Part Right.
  28. Select all the parts and copies, copy and
  paste.  Continue until
  there are 100's of
  copies.
  29. Save,  and close Product
  Editor
  30. Activate DMU
  Search
  31. Select binocular
  icon
  32. Search and select the Product created in the
  steps above, OK.
  33. Select Zone Filter
  button
  34. From Zone Filter, select Binocular
  icon
  35. On SearchFor, search for the zone Left.   Select
  it, OK.
  36. On Zone Filter, select zone
  Left
  37. Select
  OK
  38. Select Apply Filter
  button
  39. Behavior:  Expected results appear in lower
  pane, including number
  of associated part instances and a list of associated
  part numbers
  40. Select Reset All
  Icon
  41. Zone Filter
  Icon
  42. From Zone Filter, select Binocular
  Icon
  43. On SearchFor, select zone Right,
  OK
  44. On Zone Filter, select zone
  Right
  45. Select
  OK
  46. Select Apply Filter
  button
  47. Behavior:  In the Results area, it displays the
  number of Part
  instances found, but does not list
  them.
  Required behavior: list the part instances.
  
  .
  

Local fix

Problem summary

• DMUSEARC : DMU ZONE FILTER SEARCH WORKS ONLY ONCE PER ENOVIA SE
  SSION
  Scenario:
  1. Create
  product
  2. Configure
  product
  3. Create
  Action
  4. Associate Configured product to Action, with
  Modification
  5. Send the Product to Product Editor with
  Action.
  6. Select the Product name in product
  editor
  7. SendTo Zone Editor from context
  menu.
  8. Select Product name in Zone
  Editor
  9. Select Add-a-Zone from context
  menu
  10. Assign Zone an ID:
  Left
  11. Assign coordinate
  limits:
  a. -1000 < X <
  0
  b. -1000 < Y <
  1000
  c. -1000 < Z <
  1000
  12. OK, save zone
  Left
  13. Select Add-a-Zone from context
  menu
  14. Assign Zone an ID:
  Right
  15. Assign coordinate
  limits:
  a. 0 < X <
  1000
  b. -1000 < Y <
  1000
  c. -1000 < Z <
  1000
  16. OK, save zone
  Right
  17. Select save icon and then close Zone
  Editor.
  18. From Product Editor, use context menu to send
  product to CATIA V5
  as
  Assembly.
  
  19. In Catia V5, create new part named Part
  Left
  20. Create new part named Part
  Right
  21. In Part Left, create a sketch on the XY plane
  entirely left of the
  V axis.
  
  22. Create a pad from the sketch in Part
  Left.
  23. In Part Right, create a sketch on the XY plane
  entirely right of
  the V
  axis.
  
  24. Create a pad from the sketch in Part
  Right.
  25. Save product and parts to Enovia, immediate
  commit.  Close Catia.
  26. In Product Editor, select Part Left, and Part
  Right, and copy from
  the context
  menu
  27. Select the Product and paste copies of Part Left
  and Part Right.
  28. Select all the parts and copies, copy and
  paste.  Continue until
  there are 100's of
  copies.
  29. Save,  and close Product
  Editor
  30. Activate DMU
  Search
  31. Select binocular
  icon
  32. Search and select the Product created in the
  steps above, OK.
  33. Select Zone Filter
  button
  34. From Zone Filter, select Binocular
  icon
  35. On SearchFor, search for the zone Left.   Select
  it, OK.
  36. On Zone Filter, select zone
  Left
  37. Select
  OK
  38. Select Apply Filter
  button
  39. Behavior:  Expected results appear in lower
  pane, including number
  of associated part instances and a list of associated
  part numbers
  40. Select Reset All
  Icon
  41. Zone Filter
  Icon
  42. From Zone Filter, select Binocular
  Icon
  43. On SearchFor, select zone Right,
  OK
  44. On Zone Filter, select zone
  Right
  45. Select
  OK
  46. Select Apply Filter
  button
  47. Behavior:  In the Results area, it displays the
  number of Part
  instances found, but does not list
  them.
  Required behavior: list the part instances.
  
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  ENOVIA VERSION 5 RELEASE 10.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  ENOVIA VERSION 5 RELEASE 13 GA level AND ON V5R12SP02
  NOTE THAT THIS PROBLEM IS ALSO UNREPRODUCED ON V5R11SP06
  
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA DMU NT/2

• Fixed component ID

  569151800

Applicable component levels

• R511 PSN SP51106

     UP03/10/23 I 1000

• R512 PSN SP51202

     UP03/10/16 N 1000