HD11364: DXF : DXF TEXT CANNOT TRANSLATED CORRECTLY FROM UG TO CATIA V5

APAR status

• Closed as program error.

Error description

• STEP BY STEP SCENARIO:
  1. Launch CATIA
  3. In DXF options, define the default font for DBCS
  import as KANJ (for Kanji)
  3. Open provided DXF file
  4. Texts are not imported correctly
  5. The file is imported correctly with Autocad 2002
  
  .
  

Local fix

Problem summary

• DXF : DXF text cannot translated correctly from UG to CATIA V5
  STEP BY STEP SCENARIO:
  1. Launch CATIA
  3. In DXF options, define the default font for DBCS
  import as KANJ (for Kanji)
  3. Open provided DXF file
  4. Texts are not imported correctly
  5. The file is imported correctly with Autocad 2002
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 13 GA level.
  .
  Incident Diagnosis
  MTEXT in KANJI in a DXF file are bad imported into
  Drafting.
  .
  Correction Explanation
  codepage ANSI_932 was not supported by the
  parser. New coding was necessary to support it.
  .
  Answer and By-Pass
  substitute the code page name at the beginning of
  the DXF file :
  ANSI-932 by dos932
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN

     UP

• R513 PSN

     UP