HD08297: ASSEMBLY DESIGN / MEASURE INERTIA : DIFFERENT VALUES FOR VISUAL IZATION AND DESIGN MODE.

APAR status

• Closed as unreproducible in next release.

Error description

• ASSEMBLY DESIGN / MEASURE INERTIA :
  DIFFERENT VALUES FOR VISUALIZATION AND
  DESIGN MODE.
  .
  BYPASS:
  NONE
  
  .
  

Local fix

Problem summary

• ASSEMBLY DESIGN / MEASURE INERTIA : DIFFERENT VALUES FOR VISUAL
  IZATION AND DESIGN MODE.
  ASSEMBLY DESIGN / MEASURE INERTIA :
  DIFFERENT VALUES FOR VISUALIZATION AND
  DESIGN MODE.
  .
  BYPASS:
  NONE
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 10.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 14 GA level.
  .
  ADDITIONAL INFORMATION:
  Scenario is not reproduced on V5R13 SP02
  Scenario is not reproduced on V5R12 SP06
  .
  INCIDENT DIAGNOSIS:
  ASSEMBLY DESIGN / MEASURE INERTIA :
  DIFFERENT VALUES FOR VISUALIZATION AND
  DESIGN MODE
  .
  1. The measure inertia doesn't have different
  values for visualization and design mode on a
  simple Pad tested here.
  2. The computation of Inertia in tabPage
  Mechanical (Right Click on the product to display
  the frame Properties) is the same as the Measure
  Inertia.
  3. We replay the scenario with the
  DMU_weight_test.model (which doesn't fitt to the
  image Design_mode.jpg and Visual_mode.jpg),
  and we didn't find any incoherence in the result of
  mass and area :
  .
  Results at V5R14GA level are
  .
  VisuMode (Exact computation)
  Area = 2.186 m2
  Mass = 21.859 kg
  .
  DesignMode
  Area = 2.15 m2
  Mass = 21.501 kg
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN

     UP

• R513 PSN

     UP