HD07741: SHAPE DSG : EXTRAPOLE FEATURE CANNOT BE UPDATED IN R11

APAR status

• Closed as Permanent restriction.

Error description

• DESCRIPTION:
  EXTRAPOLE FEATURE FROM R9 CANNOT BE
  UPDATED ON R11 RELEASE
  
  STEP BY STEP SCENARIO:
  1. Open prodivded CATPart
  2. Update
  3. Error while updating the CATPart : Extrapol.172 :
  Current extrapolation value leads to curve
  degeneration : body cannot be built. Decrease this
  value
  4. The CATPart is updated correctly in R9SP04
  
  
  
  
  
  
  
  
  
  
  .
  

Local fix

Problem summary

• SHAPE DSG  : EXTRAPOLE FEATURE CANNOT BE UPDATED IN R11
  DESCRIPTION:
  EXTRAPOLE FEATURE FROM R9 CANNOT BE
  UPDATED ON R11 RELEASE
  
  STEP BY STEP SCENARIO:
  1. Open prodivded CATPart
  2. Update
  3. Error while updating the CATPart : Extrapol.172 :
  Current extrapolation value leads to curve
  degeneration : body cannot be built. Decrease this
  value
  4. The CATPart is updated correctly in R9SP04
  
  
  
  
  
  
  
  
  
  
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  
  THERE WAS AN INSTABILITY DUE TO V5 R9 CODE THAT WAS CORRECTED O
  N V5 R11 LEVEL. CORRECTION IS VERSIONNED AND THEREFORE THE FEAT
  URE NEEDS TO BE RECREATED IN V5 R11.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels