HD07672: NO CHANGE TO "DESIGN MODE" BY CATIA AFTER "SEND TO CATIA"

APAR status

• Closed as program error.

Error description

• Description:
  It does not change to "Design Mode" by CATIA after "Send To
  CATIA"
  execution.
  .
  Preparation:
  1) Set a setup of CATIA as follows.
      Check-on "Work with the cache system" button
  ("Options" -> "Infrastructure" -> "Product Structure"
  ->"Cache Management" -> "Cache Activation ")
  .
  Scenario:
  1) Logon LCA
  2) Click "ENOVIA Home" icon
  3) Expand "Engineering Life Cycle" folder
  4) Sel "Product Class Editor"
  --> (context menu)
  --> Activate
  5) Sel Product
  --> (context menu)
  --> Send to / Product  Editor
  6) Sel Document
  --> (context menu)
  --> Send To / CATIA
  7) CATIA starts.
  8) Double-Click Part
  -- > Parts change to "Design Mode" from "Visualization
  Mode".
  --> However,  CATIA does not change to "Design Mode".
  (This defect is big issue.)
  .
  

Local fix

Problem summary

• NO CHANGE TO "DESIGN MODE" BY CATIA AFTER "SEND TO CATIA"
  NO CHANGE TO  DESIGN MODE  BY CATIA AFTER  SEND TO CATIA
  
  
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON ENOVIA VERSION 5 RELEASE 12 GA le
  vel.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R11SP04.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA LCA NT/2

• Fixed component ID

  569151700

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51104

     UP03/08/04 N 1000