IBM Support

HD07363: INCORRECT IGES LINE THICKNESS FOR VERY THIN LINES

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • DESCRIPTION:
    Incorrect IGES line thickness for very thin lines
    
    STEP BY STEP SCENARIO:
    1. Run CATIA V5 in admin mode
    2. Tools / Standard
    3. Category : Drafting
    4. Select ISO
    5. Go to Linethickness
    6. In the 1 change 0.13 to 0.01
    7. New Drawing
    8. Create simple line
    9. Select 0.01 as the line width
    10. Save is as IG2
    11. Open the IGES file with text editor
    12. Note that Global paramter 16 = 2000
    13. Note that Global paramter 17 = 2
    14. Note that line width for element 110 is 50.
    15. Therefore the linewidth of the line is 0.05
    instead of 0.01 -> this is the problem
    
    .
    

Local fix

Problem summary

  • Incorrect IGES line thickness for very thin lines
    DESCRIPTION:
    Incorrect IGES line thickness for very thin lines
    
    STEP BY STEP SCENARIO:
    1. Run CATIA V5 in admin mode
    2. Tools / Standard
    3. Category : Drafting
    4. Select ISO
    5. Go to Linethickness
    6. In the 1 change 0.13 to 0.01
    7. New Drawing
    8. Create simple line
    9. Select 0.01 as the line width
    10. Save is as IG2
    11. Open the IGES file with text editor
    12. Note that Global paramter 16 = 2000
    13. Note that Global paramter 17 = 2
    14. Note that line width for element 110 is 50.
    15. Therefore the linewidth of the line is 0.05
    instead of 0.01 -> this is the problem
    
    .
    

Problem conclusion

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 13 GA lev
    el.
    NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R12SP01.
    
    THERE WAS A PROBLEM IN THE CODE THAT IS NOW FIXED.
    THE LINEWIDTH IS NOW CORRECTLY EXPORTED TO THE GOOD VALUE INTO
    THE IGES 2D FILE.
    
    .
    

Temporary fix

Comments

APAR Information

  • APAR number

    HD07363

  • Reported component name

    CATIA V5/NT/200

  • Reported component ID

    569151000

  • Reported release

    510

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2003-06-03

  • Closed date

    2003-08-11

  • Last modified date

    2003-09-24

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    CATIA V5/NT/200

  • Fixed component ID

    569151000

Applicable component levels

  • R510 PSN

       UP

  • R511 PSN

       UP

[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA V5"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"510","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]

Document Information

Modified date:
24 September 2003