HD06064: ADVMESTO : STRANGE MESSAGE IS DISPLAYED WITH MESHING

APAR status

• Closed as program error.

Error description

• ADVMESTO : STRANGE MESSAGE IS DISPLAYED WITH MESHING
  
  SCENARIO :
  
  
  1. Open "Error_surface.CATPart" (Workbench:Advanced Meshing
  Tool)
   --> Select "Static analysis"
  2. Sel surface.1 and click "Surface Mesher" and key-in as
  followings:
    - Element shape : Set frontal quadrangle method
    - Mesh size     : 5mm
    - Constraint sag: 1mm
    - Offset        : 0mm
    - Min holes size: 2mm
    - Automatic mesh capture      : Activate/0.1mm
    - Merge during simplification : Activate/3mm
  --and click OK
  ---> ununderstandable error message is displayed
  

Local fix

Problem summary

• STRANGE MESSAGE IS DISPLAYED WITH MESHING
  *DESCRIPTION
        010<br>
  ADVMESTO : STRANGE MESSAGE IS DISPLAYED WITH MESHING
        010<br>
  
        010<br>
  SCENARIO :
        010<br>
  
        010<br>
  
        010<br>
  1. Open "Error_surface.CATPart" (Workbench:Advanced Meshing
        010<br>
  Tool)
        010<br>
   --> Select "Static analysis"
        010<br>
  2. Sel surface.1 and click "Surface Mesher" and key-in as
        010<br>
  followings:
        010<br>
    - Element shape : Set frontal quadrangle method
        010<br>
    - Mesh size     : 5mm
        010<br>
    - Constraint sag: 1mm
        010<br>
    - Offset        : 0mm
        010<br>
    - Min holes size: 2mm
        010<br>
    - Automatic mesh capture      : Activate/0.1mm
        010<br>
    - Merge during simplification : Activate/3mm
        010<br>
  --and click OK
        010<br>
  ---> ununderstandable error message is displayed
        010<br>
  
        010<br>
  
        010<br>
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 12 GA lev
  el.
  NOTE THAT THIS PROBLEM WILL NOT BE FIXED IN R11 level
  
  Incident Diagnosis
  impossible to mesh a face
  
  Correction Explanation
  meshing wag generating two superposed triangles.
  
  Answer and By-Pass
  modify SAG.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN

     UP