HD05366: SHAPEDSGN/ CAN NOT CREATE AN EDGE FILLET / IMPOSSIBLE RELIMITATION THE LOCAL TOPOLOGY OR GEOMETRY IS TOO COMPLEX

APAR status

• Closed as program error.

Error description

• Abstract:
  SHAPEDSGN/ CAN NOT CREATE AN EDGE FILLET  / IMPOSSIBLE
  RELIMITATION THE LOCAL TOPOLOGY OR GEOMETRY IS TOO COMPLEX
  
  scenario
  .
  1. Open the file.
  >> Workbench is "Generative Shape Design".
  2. Double click the "EdgeFillet.1" in the tree to edit it.
  >> The "Edge Fillet Definition" window is displayed.
  3. Change "Radius:" to "7.5mm".
  4. Click "OK" button.
  >> The "Update Diagnosis" window is displayed.
  >> It is written as below.
  Part3: Impossible relimitation.
  The Local topology or geometry is too complex.
   - Fillet: decrease the radius.
   - Chamfer: decrease the length of the chamfer or modify the
  angle.
   - draft: modify the angle.
  

Local fix

Problem summary

• INCIDENT DIAGNOSIS:
   SHAPEDSGN/ CAN NOT CREATE AN EDGE FILLET / IMPOSSIBLE
   RELIMITATION THE LOCAL TOPOLOGY OR GEOMETRY IS TOO COMPLEX
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 12 GA level AND V5R11SP02
  
   INCIDENT DIAGNOSIS:
   SHAPEDSGN/ CAN NOT CREATE AN EDGE FILLET / IMPOSSIBLE
   RELIMITATION THE LOCAL TOPOLOGY OR GEOMETRY IS TOO COMPLEX
  
   ANSWER AND POSSIBLE BY-PASS:
   Problem corrected
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

• FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51102

     UP03/06/06 N 1000