HD05090: INTEROP V5-V4 : DIFFERENCE OF SOLID VOLUME (CATPART, MODEL) IS TOO LARGE (MESURE PERFORMED IN CATIA V5)

APAR status

• Closed as unreproducible.

Error description

• Scenario :
  1) Open Provided CATPart
  2) Check Volume
  .
  Result : 7327980.46 mm3
  .
  3) Open Provided CATProduct including the *.model created
  from the previous CATPart
  4) Check Volume
  .
  Result : 7298507.962 mm3
  

Local fix

Problem summary

• INTEROP V5-V4 : DIFFERENCE OF SOLID VOLUME
  (CATPART, MODEL) IS TOO LARGE (MESURE PERFORMED IN CATIA V5)
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION 5 RELEASE 9
  .
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
      CATIA VERSION 5 RELEASE 12 GA level AND ON V5R11SP03.
  .
  The difference calculated between V5 CATPart, V4 Model (in CV4 -
  CV5) is lower than 1%.
  .
  CATIA tolerances is acceptable while lower than 3%.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN

     UP

• R510 PSN

     UP