HD04945: PB TO GENERATE PDF FROM CATIA

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT:  pb to generate pdf from catia
  Problem:
  A problem exists when a PDF file is created from a CATIA V5
  drafting with the function "file / Save as / .Pdf ".
  The font which used by the society, "Vag round.ttf", is not
  the same on the PDF : image 2.jpg is the real one &
  image3.jpg is the one in the drafting.
  The CATIA V5 loaded generator is in question, because if
  "acrobat PDF Writer 4.0" is used with the "print" function,
  everything is OK.
  The font is joined to test, but it's recognized by Acrobat
  and CATIA ; it changes when you "save as in PDF".
  Pay attention to the Acrobat pdf Writter parameters :
  "Partial True Type" must be disable ine the properties.
  At last, It would be good to obtain  a Enhancement request,
  in the same way, of Acrobat which is loaded into CATIA V5 in
  order to check off a compressed option ; because it's not
  the case for the PDF format, and therefore is huge.
  This, regarding a re-open document with Acrobat and re-save
  with the optimized option.
  

Local fix

Problem summary

• INCIDENT DIAGNOSIS:
  PROBLEM TO GENERATE PDF FROM CATIA.
  True type fonts not filled.
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION 5 RELEASE 9
  .
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
      CATIA VERSION 5 RELEASE 12 GA level AND ON V5R11SP02 AND
   V5R10SP06.
  
   INCIDENT DIAGNOSIS:
  PB TO GENERATE PDF FROM CATIA.
  
   REASON:
  A CORRECTION OF THE PROBLEM HAS ALREADY BEEN DELIVERED AND THE
   M510 ONED LEVELS.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN

     UP

• R510 PSN SP51006

     UP03/07/02 N 1000

• R511 PSN

     UP