HD04528: SMARTEAM CATIA V5 INTEGRATION: DESIGN TABLE LINKED TO CATPART ISN'T REGISTERED WHEN CATALOG IS SAVED TO TPDM

APAR status

• Closed as unreproducible in next release.

Error description

• SMARTEAM CATIA V5 INTEGRATION:Design table linking to
  CATPart isn't registered when catalog is saved to Tpdm.
  
  Scenario:
  1.Create a new CATPart.
  2.Create a design table for the new CATPart and edit it.
   2-1.Add "A" column to design table A.
   2-2.Input "PartNumber" in the cell￭A1.
   2-3.Input any value in the cell￭A2.
  3.Save CATPart using File/Save menu.
  4.Create a catalog file.
   4-1.Select Start/Infrastructure/Catalog Editor.
   4-2.Double click on "Chapter.1" and then select Add Family
  icon.
   4-3.Click OK button on Component Family Definition panel.
   4-4.Double click on "ComponentFamily.2" and then select Add
  Part Family Components icon.
   4-5.Click Select Document button on Part Family Definition
  panel.
   4-6.Select CATPart created at previous step in Select File
  panel and click Open button.
   4-7.Click OK button on Part Family Definition panel.
  5.Save the catalog file using File/Save menu.
  6.Close the catalog file and the CATPart using File/Close
  menu.
  7.Open the catalog file using File/Open menu.
  8.Select TeamPDM/Connect and login to Tpdm.
  9.Select TeamPDM/Save and save the catalog file to Tpdm.
    => Design table object is NOT created.
  

Local fix

Problem summary

• DT LINKED TO CATPART ISN T REGISTERED WHEN CATALOG IS SAVED TO
  TPDM
  *DESCRIPTION
  010<br>
  SMARTEAM CATIA V5 INTEGRATION:Design table linking to
  010<br>
  CATPart isn't registered when catalog is saved to Tpdm.
  010<br>
  010<br>
  Scenario:
  010<br>
  1.Create a new CATPart.
  010<br>
  2.Create a design table for the new CATPart and edit it.
  010<br>
  2-1.Add "A" column to design table A.
  010<br>
  2-2.Input "PartNumber" in the cell A1 .
  010<br>
  2-3.Input any value in the cell A2 .
  010<br>
  3.Save CATPart using File/Save menu.
  010<br>
  4.Create a catalog file.
  010<br>
  4-1.Select Start/Infrastructure/Catalog Editor.
  010<br>
  4-2.Double click on "Chapter.1" and then select Add Family
  010<br>
  icon.
  010<br>
  4-3.Click OK button on Component Family Definition panel.
  010<br>
  4-4.Double click on "ComponentFamily.2" and then select Add
  010<br>
  Part Family Components icon.
  010<br>
  4-5.Click Select Document button on Part Family Definition
  010<br>
  panel.
  010<br>
  4-6.Select CATPart created at previous step in Select File
  010<br>
  panel and click Open button.
  010<br>
  4-7.Click OK button on Part Family Definition panel.
  010<br>
  5.Save the catalog file using File/Save menu.
  010<br>
  6.Close the catalog file and the CATPart using File/Close
  010<br>
  menu.
  010<br>
  7.Open the catalog file using File/Open menu.
  010<br>
  8.Select TeamPDM/Connect and login to Tpdm.
  010<br>
  9.Select TeamPDM/Save and save the catalog file to Tpdm.
  010<br>
  => Design table object is NOT created.
  010<br>
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 9.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 14 GA level AND ON
  V5R13SP02 and V5R12SP06.
  ...
  Incident Diagnosis
  DT LINKED TO CATPART ISN'T REGISTERED WHEN CATALOG
  IS SAVED TO TPDM
  .
  Reason
  Correction provided through another APAR.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R511 PSN

     UP